STARLEAD LED Wall Mounted Vanity Mirror Instructions
- June 15, 2024
- STARLEAD
Table of Contents
STARLEAD LED Wall Mounted Vanity Mirror
Product Information
Technical Information
- Size: 80x60cm
- Input: 220V
- Power: 55W
- Ra: >80
- LED: SMD2835/288PCS
- Lumen: 1000lm
- CCT: 6500K/3000K/4000K
Kits Coming with the Mirror
- Expansion Tube 3+1
- Screw 3+1
- Junction Box 1
Tools Needed for Installation
- Pencil
- Screw Driver
- Rubber Mallet
- Electric Drill
- Tape Measure
Installation Steps
- Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
- Use a hammer to drive the plastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the screws into the plastic anchors.
- Connect the wall power cord to the wires behind the mirror through the junction box.
- Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.
Instructions for Use
For LED Light
The mirror is equipped with 3 touch-sensor switches. When the installation is
finished and the power is connected, the touch sensor light will be on. It can
be turned off by a long press when the mirror light is off.
- One-click for light on/off
- Quick clicks on-off-on for color temperature changing
- Long press for dimming
For Demister Pad
The second touch sensor is for the demister pad. Before having a shower, we
can turn it on. When we finish the shower, the demister pad area will be clear
without any fog. Turn it off before leaving.
For Bluetooth Speaker
The third touch sensor is for the Bluetooth speaker. When the power is
connected, it will have a reminder voice indicating that it is ready for
connecting. Open the Bluetooth function from the mobile phone, we can find a
signal called “mirror multimedia”. Click and connect, then we can play music
from the phone and the music will come from the speaker’s backside of the
mirror. Turn it off when it is not in use to avoid accidental connections from
neighbors.
Kind Reminder
Bluetooth is connectable to one device only. If you want to connect a second
device, please forget the first device.
FAQ (Frequently Asked Questions)
-
Q: Can I install the mirror vertically and horizontally?
A: Yes, both vertical and horizontal installations are valid. -
Q: What are the dimensions of the mirror?
A: The mirror has a size of 80x60cm. -
Q: What is the input voltage for the mirror?
A: The input voltage is 220V. -
Q: How much power does the mirror consume?
A: The mirror consumes 55W of power. -
Q: What is the color rendering index (Ra) of the LED?
A: The color rendering index (Ra) is greater than 80. -
Q: How many lumens does the LED produce?
A: The LED produces 1000lm of brightness. -
Q: What are the available color temperature options for the LED?
A: The LED has color temperature options of 6500K, 3000K, and 4000K.
MANUFACTURER SPECIALIZED IN: LED wall-mounted vanity mirror, LED full-length mirror, LED mirror cabinet.
Technical information
Both vertical and horizontal installations are valid.
- Size: 80x60cm
- Input: 220V
- Power: 55W
- Ra: >80
- LED: SMD2835/288PCS
- Lumen: 1000lm
- CCT: 6500K/3000K/4000K
Kits coming with the mirror
Tools needed for installation
Installation steps
Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
Use a hammer to drive the plastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the crews into the plastic anchors.
Connect the wall power cord to the wires behind the mirror through the junction box.
Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.
Instructions for use
The mirror is equipped with 3 touch sensor switches, when installation is finished and power connected, the touch sensor light will be on, it can be turned off by a long press when the mirror light is off.
For LED Light
The first touch sensor is for the LED light, one-click for light on/off, quick
clicks on-off-on for color temperature changing, and a long press for dimming.
For Demister Pad
A second touch sensor is for the demister pad, before having a shower we can
turn it on, and when we finish the shower, the demister pad area will be clear
without any fog. Turn it off before leaving.
For Bluetooth Speaker
The third touch sensor is for the Bluetooth speaker, when the power is
connected, it will have a reminder voice means that it is ready for
connecting. Open the Bluetooth function from the mobile phone, we can find a
signal called mirror multimedia. Click and connect then we can play music from
the phone and the music will come from the speaker’s backside of the mirror.
Turn it off when it is free, and avoid the neighbor connecting it by accident.
Kind reminder
Bluetooth is connectable to one device only. If you want to connect the second
device, please forget the first device.
Warning
- Disconnect from the outlet before putting on or taking off parts.
- Close supervision is necessary when this mirror is used by, or near children.
- Keep the cord away from heated surfaces.
- Make sure that the electricity is turned off at the power source before proceeding with the installation.
- Always unplug all the power supply cords before moving the product, testing the product, or repairing the product.
- Do not use outdoors.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>