Apps Ewpe Smart App Owner’s Manual
- July 27, 2024
- APPs
Table of Contents
Apps Ewpe Smart App Owner’s Manual
Installation Instruction of Wifi Module
Before installation, please confirm whether the purchased WiFi module complies with this unit.
WARNING:
- Installation must be performed by qualified professionals. Otherwise, it may cause personal injury or damage. Do not put through the power before finishing installation.
- Please cut off the power for the air conditioner before this operation.
Split Air Conditioner
Installation steps of WiFi module
- Open the panel of indoor unit as show in the fig and unscrew the screw on the electric box cover.
NOTICE: Actual product may be different from above graphics, please refer to actual product.
-
Open the electric box cover and you can see the WiFi connection wire. (The color of WiFi connection wire is the same as the color of connection port in WiFi module).
-
Remove the wire clip, pull out the WiFi connection wire from the electric box and then connect with the port in WiFi module.
NOTICE: the WiFi connection wire shall go through the wire groove otherwise the electric box cannot be closed.
-
Place the WiFi module beside the electric box. After confirming the position, please fix the WiFi module with screws NOTICE the position for placing WiFi module may be different for different models: actual position please refer to the actual situation.
-
Neaten the WiFi connection wire, close the electric box cover and then tighten
the screws. -
After closing the panel of indoor unit, the installation of WiFi module is done.
Control Flow Chart
Operating Systems
Requirement for Users smarm prongs:
IOS system Support iOS7.0 and above version
Android system Support Android 4.4 and above version
Ewpe Smart App Download Linkage
Scan the QR code or search “Ewpe Smart” in the application market to download and install it. When “Ewpe Smart App is installed, register the account and add the device to achieve long-distance control and LAN control of Ewpe Smart home appliances For more information, please refer to “Help” in App.