JUNIPER SYSTEMS mesa pro Battery Multi Charger Kit User Guide
- June 9, 2024
- JUNIPER SYSTEMS
Table of Contents
Battery Multi-Charger Kit User Guide
How to Use the Battery Multi-Charger
The Battery Multi-Charger allows you to charge spare battery packs for the
Mesa Pro.
Batteries charge best at room temperature (about 68°F or 20°C). Batteries will
not charge (or might charge slowly) at temperatures below 32°F (0°C) or above
122°F (50°C).
Power the Battery Multi-Charger by using the AC wall charger provided with
your Mesa Pro. Insert the battery pack into the Battery Multi-Charger,
orienting it so that the battery contacts meet the charging contacts in the
Battery Multi-Charger. The LEDs will start to flash slowly from the right with
each light representing a 25% charge.
The Battery Multi-Charger can charge two battery packs at once. If needed, it
can be mounted.
Battery Multi-Charger LED Indicator
The LED indicates the charging status:
- 4 LEDs solid, on: The battery pack is fully charged.
- 4 LEDs blinking (slow): The battery pack is too hot or too cold to charge.
- 1 LED blinking (slow): The battery pack is charging.
- 1st and 4th LED blinking (slow): The battery has a fault and is unable to charge.
- Off: There is no power. The battery is not charging.
Juniper Systems, Inc.
Logan, UT, USA
Phone: 435.753.1881
Email: sales@junipersys.com
Juniper Systems Ltd.
Bromsgrove, UK
Phone: +44 (0) 1527 870773
Email: infoemea@junipersys.com
junipersys.com
©Copyright Juniper Systems 16Nov22. All rights reserved. Part Number 31599-00