STARLEAD UKM3051 Round Bathroom Mirror Instruction Manual
- June 17, 2024
- STARLEAD
Table of Contents
STARLEAD UKM3051 Round Bathroom Mirror
Specifications:
- Size: Variable
- Input: AC Power
- Power: Variable
- Ra >80 LEDs
- Lumens: Variable
- CCT: Variable
Product Information:
The LED mirror from STARLEAD is a wall-mounted vanity mirror equipped with
advanced features such as touch sensor switches, demister pad, and Bluetooth
speaker.
Tools Needed for Installation:
- Pencil
- Screwdriver
- Electric Drill
- Junction Box
- Rubber Mallets
- Tape Measure
Installation Steps:
- Measure the distance between the brackets on the back of the mirror and mark the same distance on the wall using a level.
- Drive plastic anchors into the wall using a hammer, then screw in the screws with an electric drill.
- Connect the wall power cord to the wires behind the mirror through the junction box.
- Align brackets behind the mirror with the screws on the wall and hang it securely.
Instructions for Use:
The mirror features 3 touch sensor switches:
- Touch sensor 1: Controls the light – single click for on/off, quick clicks for color temperature changing, long press for dimming.
- Touch sensor 2: Controls the demister pad for a fog-free mirror surface after a shower.
- Touch sensor 3: Controls the Bluetooth speaker – connect to your phone and enjoy music through the mirror speakers. Remember to turn it off when not in use.
FAQ:
Q: Can I connect multiple devices to the Bluetooth speaker?
A: No, the Bluetooth speaker can only be connected to one device at a
time. If you wish to connect a new device, please disconnect the existing one
first.
MANUFACTURER SPECIALIZED IN: LED wall mounted vanity mirror, LED full length mirror, LED mirror cabinet.
Technical information
Kits coming with the mirror
Tools needed for installation
Installation steps
- Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
- Use a hammer to drive the pastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the crews into the plastic anchors.
- Connect the wall power cord to the wires behind the mirror through the junction box.
- Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.
Instructions for use
The mirror is equipped with 3 touch sensor switch, when installation finished and power connected, the touch sensor light will be on, it can be turned off by long press when the mirror light is off.
For LED Light
First touch sensor is for the LED light, one click for light on/off, quick
clicks on-off-on for color temperature changing, long press for dimming.
For Demister Pad
Second touch sensor is for the demister pad, before having a shower we can
turn it on, when we finish the shower, the demister pad area would be clear
without any fog. Turn if off before leaving.
For Bluetooth Speaker
Third touch sensor is for the bluetooth speaker, when the power connected, it
will have a reminder voice means that it is ready for connecting. Open
bluetooth function from the mobile phone, we can find a signal called mirror
multimedia. Click and connect then we can play music from the phone and the
music will come from the speakers backside of the mirror. Turn it off when it
is free, avoid the neighbour connect it by accident.
Kind reminder
Bluetooth is connectable to one device only. If you want to connect the
second device, please foget the first device.
Warning
- Disconnect from outlet before putting on or taking off parts.
- Close supervision is necessary when this mirror is used by, or near children.
- Keep the cord away from heated surfaces.
- Make sure that the electricity is turned off at the power source before proceeding with the installation.
- Always unplug all the power supply cords from before moving the product, testing the product, or repairing the product.
- Do not use outdoors.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>