AUTOUTLET P6100 100MHz Oscilloscope Clip Probes User Manual
- June 15, 2024
- AUTOUTLET
Table of Contents
AUTOUTLET P6100 100MHz Oscilloscope Clip Probes
Product Information
Specifications
- Product Model: EFU021-EN
- Product Name: P6000 1X&10X Oscilloscope Probe
- Warranty: 18 months from the day of purchase
Product Usage Instructions
Frequency Compensation
Before taking any measurements using the probe, it is important to check
and adjust the compensation of the probe to match the channel inputs of your
oscilloscope. Most oscilloscopes have a square wave reference signal available
at a terminal on the front panel used to compensate the probe. Connect the
probe to the signal source on your oscilloscope. Set the probe to 10X
position. Adjust trimmer until seeing flat-top square wave on the display.
- IEC measurement category II is for measurements performed on circuits directly connected to low voltage installations. Examples are measurements on household appliances, portable tools and similar equipment.
- Equipment fully protected by DOUBLE INSULATTION or REINFORCED INSULATION.
- Review this user manual carefully to avoid any personal injury or damage to this product and any product connected to it. To avoid potential hazards, use this product only as specified.
- The measurement category of a combination of a PROBE ASSEMBLY and an accessory (an auxiliary to the measurement) is the lower of the measurement categories of the PROBE ASSEMBLY and of the accessory.
- Follow the instructions to use the PROBE ASSEMBLY will impair or ruin its self-owned protection function.
Follow these steps
- Locate the square wave reference signal terminal on the front panel of your oscilloscope.
- Connect the probe to the signal source on your oscilloscope.
- Set the probe to the 10X position.
- Adjust the trimmer until you see a flat-top square wave on the display of your oscilloscope.
Accessories and Features
Probe is provided with several accessories designed to make probing and measurement simpler. Please take a moment to familiarize yourself with these accessories and their uses.
Warranty **
**
Thank you for choosing AUTOUTLET product! All AUTOUTLET products come with a
warranty of 18 months from the day of purchase. If you require any support or
assistance, please feel free to contact us.
Contact Email:
eformationuk@outlook.com
Frequently Asked Questions (FAQ)
-
How long is the warranty period for the P6000 1X &10X **Oscilloscope Probe?
** The warranty period for the P6000 1X&10X Oscilloscope Probe is 18 months from the day of purchase. -
How can I contact AUTOUTLET for support or assistance?
You can contact AUTOUTLET by sending an email to eformationuk@outlook.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>