AUTOUTLET AT045 Rear Reversing Car Parking Sensors 4 Sensors Kit User Guide
- June 15, 2024
- AUTOUTLET
Table of Contents
AUTOUTLET AT045 Rear Reversing Car Parking Sensors 4 Sensors Kit
Feature
- The parking system turns on automatically when the car engine starts.
- The beeping alarm prompt step by step, closer the obstacle, more rapid the alarm sound.
- Three colors (green, yellow, red) LED lights indicate obstacle distance.
- Obstacle specific position distance shows on the LED screen.
- Specific figure for distance shows on the LED screen.
- High quality and easy to install.
Specification
- Rate voltage: DC/12V
- Rate current: 20mA-200mA
- Detecting distance: 0.3-2.5m
- Detecting angle: H> 80 ° V> 70°
- Ultrasonic frequency: 40KHz
Installation for 4/8 Sensors
Host connection diagram
4 Sensor Series
8 Sensor Series
Sensor’s Installations Guide
Note: When connecting the sensor, it should be divided into 4 or 8 according to the quantity.
- Four sensors are installed at the back of the car including rear sensor A B C D.
- Eight sensors installed in the front of the car include E F GH, and installed in the back of the car include A B C D.
- Sensor installation drawing unit (cm).
- The installation location of the sensor depends on the number of sensors.
Four Sensors
Eight Sensors
Installation Angle
- Determine the installation location and ensure that there are no obstacles around the sensor.
- Make sure that the sensor is installed at 90°angle to the bumper.
Installation Step
Alarm mode
stages| Distance to
the barrier
| awareness| Distance
showing
| Sound
alarm
| color
No
---|---|---|---|---|---
1| >2.5m| Safe area| 0| Silence| Green
2| 2.5-1.6m| Safe area| 2.5-1.6| Silence| Green
3| 1.5-1.0m| Safe area| 1.5-1.0| Bi bi ..b| Yellow
4| 0.9-0.5m| Alarm area| 0.9-0.5| Bib bi| red
5| 0.4m| Dangerous area| 0.0-0.4| Bi..|
Note
- The metal bumper may affect the performance of the sensor.
- The sensor cannot be repainted, while keeping the surface of the sensor clean to avoid covering dust. Otherwise it will affect the sensitivity of the sensor.
- After installing the system, test at different angles under the sensor to ensure that the sensor is normal.
- In some cases, the system does not work: If the distance between the vehicle and the obstacle is too small (about 0.3 m).
Warranty
- Thanks for using our product. All products come with warranty of 18 months from the day of purchase.
- If you need any support, please feel free to contact us.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>