Galaxy SCT22 Tablets S9 FE 5G User Manual
- June 15, 2024
- Galaxy
Table of Contents
Galaxy Tab S9 FE+ 5G
SCT22
Basic Manual
Galaxy SCT22 Tablets S9 FE 5G
(Online Manual)” (Japanese)
https://www.au.com/online-manual/sct22/
- Please keep the software up-to-date. For details on how to update the software, please refer to the “BXik at88 s¢H0hK (Full Instruction Manual)” (Japanese) on the website of the contracted carrier.
- For the latest information, please refer to the “EX#Rait FA s+ 40hR (Full Instruction Manual)” (Japanese) on the website of the contracted carrier.
- For the latest information on the product, refer to the following website. https://www.samsung.com/jp/ (Japanese)
- The software of the product may differ from the information in this guide depending on version upgrades, service changes, or termination. The contents of this manual are subject to change without notice in the future.
- In this manual, “Galaxy Tab S9 FE+ 5G” is usually referred to as “the product”.
- Company names and product names referred to in this manual are trademarks or registered trademarks of respective companies. The TM and ® marks may_ be omitted in this manual.
Getting Ready
List of Packaged Items
- Main unit
- SIM card removal tool (sample)
- S pen (sample)
- USB cable (C to C) (sample)
memo
- Please use specified charging equipment (sold separately).
- The battery is built into the product.
- Illustrations used in this manual are just images for explanations. They may be different from the actual ones.
- The USB cable (C to C) (sample) attached to the product corresponds to charge up to 3A. Oln this manual, “microSD™ memory card (commercial item)”, “microSDHC™ memory card (commercial item)” and “microSDXC™ memory card (commercial item)” are abbreviated as “microSD memory card”.
- Use the product in a place without magnetic interference for the product to operate normally.
Attaching the SIM card
Turning the Power On
Press and hold )(Side button)/Fingerprint recognition sensor for over 2 seconds
Swipe the screen up and down, left and right o unlock the screen
memo
- Press and hold | (Side button)/Fingerprint recognition sensor and lower side of Volume button simultaneously for over 7 seconds, when the power cannot be turned off in the usual way or the screen freezes.
Names of Parts
- (Side button)/Fingerprint recognition sensor
- Volume button
- Microphone (upper)
- Vent hole
- SIM card/microSD memory card tray
- Tray eject hole
- Speaker”
- Microphone (left)
- Display (touch panel)
- Light sensor
- Front camera
- USB Type-C™ connection terminal (external connection terminal)
- Microphone (back) ”
- Rear camera
- Pogo pin
Notes on Usage
Before you start using the product, be sure to read the “Safety Precautions”
to ensure correct use.
Before considering that there is a malfunction, please refer to the
(Troubleshooting)” from (Full Instruction Manual)” (Japanese).
- Communication is not possible even inside the service area in places where the signal does not reach (for example, tunnels and basements). Also, communication is sometimes not possible in poor reception areas. Communication is sometimes interrupted if you move into a poor reception areas during communications.
- Since the product uses radio waves, the possibility of communication intercepts by third parties cannot be eliminated. (Though 5G/LTE/WiMAX 2+/GSM/UMTS system has highly secure confidential communication features. )
- While the product supports the au World Service, each network service described in this manual varies depending on the area and service content.
- Since the product is a radio station under the Radio Law, you may be asked to temporarily submit the product for inspection in accordance with the Radio Law.
- The IMEI information of the product is automatically sent to carrier for maintenance and monitoring operational status of the product.
- To use the product overseas, check the condition such as regulations of the country/region in advance.
- The Company is not liable for any damages or lost profits caused by natural disasters such as earthquakes, lightning, storms, floods, as well as fires, actions by third parties, other accidents, intentional or mistaken operation by the customer, or use under other unusual conditions outside the responsibility of the Company.
- The Company is not liable for any incidental damages (change/disappearance of saved content, loss of business income, disruption of business, etc.) arising from use of or inability to use the product.
- The Company is not liable for any damages or lost profits resulting from failure to observe the described content of (Full Instruction Manual)” (Japanese), “Basic Manual” (this manual).
- Information such as positioning data obtained by the measurement sensor and GPS of the product is only a guide and cannot be used for purposes that require a high degree of reliability. Note that the Company assumes no responsibility for any damages or lost profits resulting from positioning errors.
- The Company is not liable for any damages or lost profits resulting, for example, from malfunctions caused by combination with connected devices or software not related to the Company.
- Malfunction, repair, or other handling of the product may result in changes or loss of captured or downloaded image data. The Company is not liable for any damage or lost income resulting from recovery of these data.
- It is recommended you save the important data on your PC’s hard disk, etc. Whatever the cause of the defect or malfunction may be, the Company assumes no responsibility for alteration or loss of saved data.
- Data saved in the product, such as contacts, and images/videos, might be altered or lost in accident, fault, repair or mishandling. Be sure to keep a copy of important contents. Note that the Company assumes no responsibility for any damages or lost profits resulting from altered or lost contents.
memo
- Reproduction of the content of this manual in part or in whole is prohibited.
- The content of this manual is subject to change without notice.
- Some functions of the product may become unavailable as a result of changes in OS specifications, changes or termination of services, etc.
- Every effort has been made in the preparation of this manual. In the unlikely event that you notice anything suspicious or omissions, please contact us.
Safety Precaution (Observe Strictly)
- Before using the product, read the precautions below to ensure safe use and handling.
- These precautions are intended to protect you and others around you. Read and follow them carefully to avoid injury, damage to the product or damage to property.
- The signs below differentiate between the levels of danger that can occur if the product is not used within the specified guidelines.
Explanation of Prohibition and Mandatory graphical symbols used in this manual
| Indicates an action that is not allowed.
---|---
| Indicates that disassembly is not allowed.
| Indicates that use in a place where the product is likely to get wet or
allowing the product to get wet is not allowed.
| Indicates that handling with wet hands is not allowed.
| Indicates an action that must be obeyed at all times.
| Indicates that the power plug must be disconnected from the outlet.
Precautions common to the product main unit, intimal battery, charging equipment, SIM card, S Pen (sample), accessory devices
Danger
Do not use, store, or leave the product in a place subject to high temperature
or in places where heat builds up (such as close to fires or heating devices,
inside kotatsu or bedding, under direct sunlight, or ina car on an extremely
hot day).
May cause fire, burns, injuries or electric shocks, etc.
Do not put the product into heating cooking devices such as microwave ovens,
IH cooker or high-pressure containers such as pressure cookers.
May cause fire, burns, injuries or electric shocks, etc.
Do not pour sand, soil or mud on the product or place the product directly on
sand, soil or mud. Avoid touching the product with a hand covered with sand,
etc.
May cause fire, burns, injuries, electric shocks, etc.
Do not charge the product if it is wet with liquids (drinking water, sweat,
seawater, pet urine, etc.). Also, do not charge the product in a place exposed
to water such as in a bathroom or near a humidifier.
May cause fire, bums, injuries, electric shocks, etc.
For waterproofness/dust proofness, refer to the following:
P.42 “Precautions for Waterproofness/Dust proofness”
Do not apply strong pressure to the product or allow it to break. Do not bump
or pinch the product against objects, especially when carrying it in a bag,
etc.
Damage to the intimal battery may cause fire, bums, or injury.
Examples to avoid
- Clipping the product to a door or car door with the product in a bag
- Stepping on the product on a soft object such as a sofa, bed, or bedding, or on the floor
Do not attempt to disassemble or modify the product.
May cause fire, burns, injuries or electric shocks, etc.
Do not remove the internal battery in the product.
May cause fire, bums or injuries, etc.
Caution
If you experience any skin problems as are a result of using the USB cable
(C to C) (sample), stop using it immediately and seek medical attention.
Ii Ching, rashes, eczema, etc. sometimes occurs depending on your physical
constitution and condition. For parts materials P31 “Materiel List.
Material List
Main unit
Part | Material | Surface treatment |
---|---|---|
Display (touch panel) | Glass | AF coating |
Display surrounding area | Glass | Printing, AF coating |
Exterior case (side, top, bottom) | Aluminum | Anodizing |
Side button/ Fingerprint recognition sensor | Aluminium, Epoxy | Anodizing, |
Paint coating
Volume button| Aluminum| Anodizing
SIM card/ microSD
memory card tray| PC| –
SIM card/ microSD
memory card tray (side)| Aluminum| Anodizing
SIM card/ microSD
memory card tray
(rubber gaskets)| Si Rubber| –
Rear cover| Aluminum| Anodizing
Rear camera window| Glass| Painting, AF coating
S Pen (sample)
Part| Material| Surface
treatment
---|---|---
Main unit| PC/ABS| SF Painting
Pen button| PC| SF Painting
Pen tip| Elastomer/ POM| –
SIM card removal tool (sample)
Part | Material | Surface treatment |
---|---|---|
Main unit | SUS304 | Barrel polishing |
USB cable (CtoC) (sample)
Part| Material| Surface
treatment
---|---|---
Cable| TPE| –
Plug (metal part)| SUS304| Nickel plating
Plug (outer covering)| PC| –
Handling Precautions
The following precautions are the main items that provided to prevent the product from getting a malfunction and to ensure that performance can be fully demonstrated. Thoroughly read these precautions to ensure correct use. For details, please refer to the “INPAMFIAN geffi (Full Instruction Manual)” (Japanese).
- Precautions common to the main unit, internal battery, charging equipment, SIM card, S Pen (sample), accessory devices
- In the following cases, do not use them in places that have extremely hot or low temperatures, or high humidity. (Use within an ambient temperature range of 5 °C to 35 °C and a humidity range of 35% to 85%. However it can be provisionally used if it is 36 °C to 40 °C.)
- The product main unit
- SIM card (when attached to the product main unit)
- In the following cases, do not use the product in extremely hot, cold or humid places. (Use within an ambient temperature range of 5 °C to 35 °C and humidity range of 35% to 85%.)
- Charging equipment
- Accessory devices
- Clean the charging jack, the external connection terminal or pogo pin with dry cotton swabs, etc. every now and then. Soiled terminals might cause poor connection. Do not exert a strong force to clean the charging jack or the external connection terminal to prevent deformation.
- Clean the product with a soft dry cloth (such as an eyeglass cleaner). Scrubbing the display strongly with a dry cloth may scratch the display. The display may be stained if splash or smear is left attached to the surface. Wiping the product using alcohol, thinner, benzine, detergent, glass cleaner, etc. might erase the printing on the outer casing or cause discoloration.
- Use the product as far away as possible from a landline phone, TV, radio, etc., may cause affect the product.
- The product may become warm while charging etc., depending on the situations, but this is not abnormal.
- Do not place the product near corrosive chemicals or in places where corrosive gas is generated. Doing so may cause a fault.
- Do not disassemble, modify or repair the product. Doing so might cause fault. Modification of phones is in violation of the Radio Law and the Telecommunications Business Act.
- Do not use the product while walking or driving a car or riding a motorized bicycle or a bicycle. Using the product while driving a car or motorbike is prohibited by law. Use of a smartphone and tablet while riding a bicycle may be punishable by some regulations.
- Do not use outlets or wiring apparatus beyond its rating when charging the product, for example, by connecting multiple devices to a single power strip.
Copyrights and rights of portrait
-
You are not allowed fo copy, distrbute, publish, modify or edit he data you shot, recorded or downloaded using the product without the consent of e copyright holder, except for permitted by copyright law such as reproduction or quotation for private use.
-
IN addition, do not use or modify portraits or names of other individuals without the consent, as it might infringe on rights of portrait.
Note that shooting and recording may be restricted at some performances, shows and exhibitions even for purpose of privet use. -
Be careful about the copyright and portrait right when publishing your photos on the Intermit, websites, etc.
Appendix
After Sales Service
- When asking for repair
For repair, please contact the Repair and Delivery Support Center.
During the warranty period| Repairs will be done based on the terms of
services of the free-of charge repair warranty described.
---|---
Outside the warranty period| We shall repair the product for a charge as
requested by the customer if repair renders it usable.
- The warranty is valid for one year from the day that you first buy the product.
- Before handing in the product for repair, make a backup of the contents of storage since they may disappear during repair. Note that the Company shall not be liable for any damages and loss of income should the contents of storage be altered or lost.
- Recycled parts that meet the Company’s quality standards are sometimes used for repair.
- Tablet used up to now that are collected by the replacement phone delivery service are reused as replacement tablet after being reconditioned and repaired. In addition, mechanical parts replaced by the after-sales service are collected and recycled by our company. Therefore, they cannot be retumed to customers.
- The product which is processed, remodeled, analyzed (including by modifying or analyzing the software (including by rooting etc.), reverse engineering, decompiing), or repaired by an unauthorized repair office is not covered by the warranty and repair may be refused.
- The battery in the product is the consumable items and are not covered by the warranty.
- Accessones and samples other than the product main unit are not covered by the free- of-charge repairs warranty.
- Performance parts for repair The Company retains performance parts for repair of the product mann unit and its peripherals for four years after discontinuation of production.
- Performance parts for repair” refers to parts required for maintaining the functions of the product.
Free-of-charge repair warranty
- When you contact the repairs help desk, have the serial number (IMEI number) ready. You can find the serial number (IMEI number) on the product or on a sticker attached the box the product is sold in.
- If the product malfunctions during the warranty period and dunng normal use that follows the precautions listed in the instruction manual, the Company wil repair the product for free.
- Repars wil not be free of charge in the following cases, even during the warranty period. (Or repair may not be possible.)
1. If you did not follow the instruction manual, and use the product correctly.
2. If the product broke or was damaged by unauthorized repairs or modifications.
Export Administration Regulations
The product and its accessories may be subject to the Japan Export
Administration Regulations (“Foreign Exchange and Foreign Trade Law” and its
related laws). In addition, U.S. Export Administration Regulations may apply
to the product and its accessories. To export and re-export the product and
its accessories, take the required measures on your responsibility and at your
expenses. For details on the procedures, contact the Ministry of Economy,
Trade and Industry or the U.S. Department of Commerce.
Intellectual Property Rights
Trademarks
The company names and product names appearing in this manual are trademarks
or registered trademarks of their respective holders.
-
microSD logo, microSDHC logo, and microSDXC logo are trademarks of SD-3C, LLC.
-
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
-
Wi-Fi®, Wi-Fi CERTIFIED®, and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance.
-
Wi-Fi of OMRON SOFTWARE Co., Ltd. is used for conversion methods. Wi-Fi® OMRON SOFTWARE Co., Ltd. 2008-2023 All Rights Reserved.
-
QR code is a registered trademark of the DENSO WAVE Incorporated.
-
USB Type-C™ is a trademarks of the USB implementers Forum.
-
All other company names and product names are trademarks or registered trademarks of respective companies referred to in this manual.
au Support
App/Website
My au app
You can check usage charges, points, contract details, etc., and perform
various procedures.
- If you are using povo, please check with the povo2.0 app/povol.0 app.
(Gapanese)
au Support (web)
There are various support information that will be useful when you are in
trouble.
(Japanese)
Message
Consultation is easy anytime, anywhere via chat! AI will respond quickly 24
hours a day, and advisors will respond in detail.
wide (Japanese)
Phone and PHS operators collect and recycle unused telephones, batteries and
battery chargers at stores bearing the logo regardless of brand and
manufacturer to protect the environment and reuse valuable resources.
November 2023, 1st Edition
Imported by: SAMSUNG ELECTRONICS JAPAN Co., Ltd.
Manufactured by: Samsung Electronics Co., Ltd.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>