GALAXY AUDIO AS-1100 UHF Any Spot Wireless Personal Monitor User Manual
- May 15, 2024
- GALAXY AUDIO
Table of Contents
GALAXY AUDIO AS-1100 UHF Any Spot Wireless Personal Monitor User Manual
⚠ USING THIS SYSTEM AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.
In order to use this system safely, avoid prolonged listening at excessive sound pressure levels. Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs.
90 dB SPL at 8 hours
95 dB SPL at 4 hours
100 dB SPL at 2 hours
105 dB SPL at 1 hour
110 dB SPL at½ hour
115 dB SPL at 15 minutes
120 dB SPL- avoid or damage may occur
It is difficult to measure the exact Sound Pressure Levels (SPL) present at
the eardrum in live applications. In addition to the volume setting on the
Personal Monitors, the SPL in the ear is affected by ambient sound from floor
wedges or other devices. The isolation provided by the fit of quality
earpieces is also an important factor in determining the SPL.
Here are some general tips to follow in the use of this product to protect
your ears from damage.
- Tum up the volume control only far enough to hear properly.
- Ringing in the ears may indicate that the gain levels are too high. Try lowering the gain levels.
- Have your ears checked by an audiologist on a regular basis. If you experience wax buildup in your ears, stop using the system until an audiologist has examined your ears.
- Wipe the ear melds with an antiseptic before and after use to avoid infections. Stop using the earphones if they are causing great discomfort or infection.
! IMPORTANT SAFETY INSTRUCTIONS!
-
READ these instructions.
-
KEEP these instructions.
-
HEED all warnings.
-
FOLLOW all instructions.
-
DO NOT use this apparatus near water.
-
CLEAN ONLY with dry cloth.
-
DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
DO NOT defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
ONLY USE attachments/accessories specified by the manufacturer.
-
UNPLUG this apparatus during lightning storms or when unused for long periods of time.
-
REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped. -
DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus.
-
Remove the batteries from the receiver if the system will not be used for a long period of time. This will avoid any damage resulting from a defective, leaking battery.
-
DO NOT throw used batteries into a fire. Be sure to dispose of or recycle used batteries in accordance with local waste disposal laws.
LICENSING INFORMATION
THIS RADIO EQUIPMENT IS INTENDED FOR USE IN PROFESSIONAL ENTERTAINMENT AND
SIMILAR APPLICATIONS.
Changes or modifications not expressly approved by Galaxy Audio Incorporated
could void your authority to operate the equipment. Licensing of Galaxy Audio
wireless microphone equipment is the user’s responsibility, and listenability
depends on the user’s classification and application, and on the selected
frequency. Galaxy Audio strongly urges the user to contact the appropriate
telecommunications authority concerning proper licensing, and before choosing
and ordering frequencies.
NOTE: THIS EQUIPMENT MAY BE CAPABLE OF OPERATING ON SOME FREQUENCIES NOT AUTHORIZED IN YOUR REGION. PLEASE CONTACT YOUR NATIONAL AUTHORITY TO OBTAIN INFORMATION ON AUTHORIZED FREQUENCIES FOR WIRELESS MICROPHONE PRODUCTS IN YOUR REGION
Licensing: Note that a ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.
FCC Consumer Alert for Wireless Microphones (U.S.)
Most users do not need a license to operate this wireless microphone system.
Nevertheless, operating this microphone system without a license is subject to
certain restrictions: the system may not cause harmful interference; it must
operate at a low power level (not in excess of 50 milliwatts); and it has no
protection from interference received from any other device. Purchasers should
also be aware that the FCC is currently evaluating use of wireless microphone
systems, and these rules are subject to change.
For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or
visit the FCC’s wireless microphone website at
www.fcc.gov/cgb/wirelessmicrophones
Introduction
Thank you for choosing a Galaxy Audio Wireless Personal Monitor system. You have joined thousands of other satisfied customers. Our years of professional experience in design and manufacturing ensure our products’ quality, performance and reliability.
System Components
All AS-1100 systems include the following components:
AS-11 00T Transmitter
AS-1100R Receiver
Power Supply
One Pair EB4 Ear Buds
One Antenna
Single/Dual Rack Kit
Quick Start Guide
AS-1100T Transmitter Features
Front Panel:
-
Headphone Jack.
-
Headphone Output Level Control.
Turn left to decrease the level, turn right to increase the level. -
LCD screen.
Please See (System Setup) on page 4. -
Transmitter Menu Up Button.
Please See (System Setup) on page 4. -
Transmitter Menu Down Button.
Please See (system setup) on page 4. -
Transmitter Set Button.
Please See (System Setup) on page 4. -
On/Off Switch.
Press and hold two seconds to turn On, press and hold to turn Off.
Back Panel:
-
DC Power Input Jack.
-
Stereo/Mono Switch.
Stereo position preserves Left/Right signals throughout system. Mono position mixes Left/Right signals together. -
Left Channel XLR/1/4″ Combo Input Jack.
-
Right Channel XLR/1/4″ Combo Input Jack.
-
Left Channel Input Level Control.
-
Right Channel Input Level Control.
-
Antenna Jack. 50 ohms.
System Setup
Body Pack Receiver
Features:
-
Antenna.
-
RF Signal LED.
Lights when RF Signal is received. -
Earphone Jack.
-
Output Level Control and On/Off Switch.
-
LCD Screen.
Please See (System Setup) on page 4. -
Receiver Menu Down Button.
Please See (System Setup) on page 4. -
Receiver programming SET Button.
Please See (System Setup) on page 4. -
Receiver Menu Up Button.
Please See (System Setup) on page 4.
Wearing the Body Pack Receiver
Clip the receiver to a belt. For best results, slide the receiver until the
belt is pressed against the base of the clip.
Changing Batteries
Expected life for two Alkaline batteries is approximately 6 hours.
When the LCD Battery Indicator is flashing (see below), the batteries should
be changed immediately, as shown on the left.
Specifications
System
Band: UHF
Frequency Range: CODE D 584~607 MHz
CODE N 518~542 MHz
Transmitter Output Level: 10dBm
Operating Range Under Typical Conditions 300′ (92m)
Note: Actual range depends on RF signal
absorption, reflection, and interference.
Audio Frequency Response: +/-3dB 60Hz~16KHz
Total Harmonic Distortion: +/-30KHz deviation
1 KHz tone <1 %
Dynamic Range: >90dB A-weighted
Operating Temperature Range:
14°F to 122°F (-10° C to +50° C)
Note: battery characteristics may limit this range
Transmitter
Max Audio input level: +6dBV
Gain Adjustment Range: 40dB
Input Impedance: 1 00Kn
Dimensions: 1.5″ x 8.3″ x 3.78″
(38 x 212 x 96mm) (HWD)
Weight: 21oz. (605g)
Power Requirements: 12-18 VDC at
300 mA (supplied by external power supply)
XLR input:
Impedance balanced
Pin1 Ground (cable shield)
Pin2 Audio
Pin3 No Audio
Body Pack Receiver
Audio Output Level: 100mW
Sensitivity: -94dBm for 30dB
Image Rejection: >55dB
Dimensions: 3.74″ x 2.6″ x 1″
(95 x 65 x 25mm) (HWD)
Weight: 3.5oz. (1 00g) without batteries
Power Requirements: 2 (AA) size alkaline or rechargeable batteries Battery
Life: About 5 hours
Please click or scan the QR for the most current frequency information.
Accessories and Replacement Parts
Many of these parts and accessories may be found and purchased from the Galaxy Audio website in the Galaxy Store (www.galaxyaudio.com/parts-and- accessories ) .
http://galaxyaudio.com/?utm_source=QR&utm_medium=AS1100-Manual&utm_campaign=AS1100
-Manual-Index-
QR
THREE YEAR LIMITED WARRANTY
WARRANTY Information can be viewed online at
http://www.galaxyaudio.com/support/warranty
A!i-1100
USER’S MANUAL
Specifications in this manual are subject to change without notice.
For the most up to date manual and information visit
www.galaxyaudio.com.
1-800-369-7768
www.galaxyaudio.com
© Copyright Galaxy Audio 2019
References
- Main - Galaxy Audio
- AS-1100 -DISCONTINUED- Galaxy Audio
- WARRANTY - Galaxy Audio
- SCHEMATICS & FREQUENCY CHARTS - Galaxy Audio