Galaxy Equipment SDM400 Single Spindle 2 Speed Drink Mixer Instruction Manual
- October 30, 2023
- Galaxy Equipment
Table of Contents
MOTOR REPLACEMENT
INSTRUCTIONS SDM400
SDM400 Single Spindle 2 Speed Drink Mixer
Unplug mixer.
| 
| 
---|---|---
Use a screwdriver to remove the six screws on the back of the unit.| Remove
the back cover by pulling it from the housing and unplugging the motor from
the top of the cover.
NOTE: remember where each plug belongs for reassembly| Use a screw driver
to remove the two screws from the top plate holding the motor in place
| 
|
Remove the agitators from the spindle using a wrench| Unplug the motor from
the housing.
NOTE: remember where each plug belongs for reassembly.| Lift the motor
assembly straight up and out of the housing.
| 
| 
Lower the new motor assembly into the housing by guiding the spindle through
the hole.| Secure the top plate using a screwdriver and the original two
screws.| Plug the new motor into the housing just as it was before Step 6
| 
| 
Plug the new motor into the back cover just as it was before Step 3.| Secure
the back cover using a screwdriver and the original six screws.| Secure the
agitators to the spindle using a wrench.