LEVITON D215O-42C Decora Wi-Fi Smart User Guide
- June 15, 2024
- Leviton
Table of Contents
LEVITON D215O-42C Decora Wi-Fi Smart
Product Information
Specification s
- General Use: 15A, 120VAC, 60Hz
- Motor: 12A, 3/4 HP
- Wi-Fi Network: 802.11 b/g/n – 2.4 GHz only
- Bluetooth: v5.0
- Supported App: My Leviton
- Supported Platforms: iOS, Android
Product Usage Instructions
Requirements
Before installing and using your Outdoor Plug-In Switch, make sure you have
the following:
- A high-speed internet connection with a 2.4 GHz Wi-Fi network
Installation
Follow these steps to install your Outdoor Plug-In Switch:
- Insert the Outdoor Plug-In Switch into a 120VAC power outlet.
Basic Operation
To turn on/off the Outdoor Plug-In Switch:
- Press the button on the device to toggle the power.
Optional Mounting
If desired, you can mount the Outdoor Plug-In Switch using the holes on the
back of the device:
- Align the holes on the device with the screws on the wall.
- Gently pull down to secure the device in place.
Note : You can detach the Outdoor Plug-In Switch from the wall screws by gently pushing the device upwards.
Download the App
To fully control and manage your Outdoor Plug-In Switch, download the My
Leviton app:
Get it on iOS Get it on Android
Connect with My Leviton Partner Products (Optional)
Visit my.leviton.com for a complete list of compatible products for your
smart home.
Connect to a Matter Controller (Optional)
Follow the instructions provided by the Matter controller to connect your
Outdoor Plug-In Switch.
LED Status
The LED on the device indicates its status:
- Green Blinking: Device is in pairing mode or pairing is in progress.
- Green Slow Blinking: Device is connected and ready for use.
- Green or Off Slow Blinking: Device is disconnected from the network.
- Alternating Blinking: Device is updating firmware or experiencing an error.
- Red Blinking: Device is paired with a complementary device or maximum number of devices have been paired.
- Alternating Blinking: Device is paired with a complementary device and is ready for use.
Frequently Asked Questions (FAQ)
Can I use this product with a 5 GHz Wi-Fi network?
No, this product only supports 2.4 GHz Wi-Fi networks.
How many devices can I pair with the Outdoor Plug-In Switch?
You can pair the Outdoor Plug-In Switch with one complementary device.
Where can I find more information about compatible products for my
smart home?
For a complete list of compatible products, visit
my.leviton.com.