Raymarine A80713 Portrait Single Mast Bracket Instruction Manual
- June 15, 2024
- Raymarine
Table of Contents
- Mast bracket overview
- Arrays of multiple mast brackets
- Parts supplied
- Single mast bracket dimensions (portrait)
- Single mast bracket dimensions (landscape)
- Dual mast bracket dimensions (landscape)
- Bracket mast size compatibility
- Location requirements
- Assembling mast bracket arrays
- Single mast bracket mounting (portrait)
- Single mast bracket mounting (landscape)
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Alpha Series Performance Display
Mast Bracket Installation Summary
Mast bracket overview
In conjunction with an Alpha Series performance display, the following accessories can be used to mount your performance display to a mast:
- Single portrait mast bracket (Alpha 7 / Alpha 9 — A80713 / A80716).
- Single landscape mast bracket (Alpha 7 / Alpha 9 — A80711 / A80714).
- Dual landscape mast bracket (Alpha 7 / Alpha 9 — A80712 / A80715).
Arrays of multiple mast brackets
Alpha Series mast brackets which are appropriate for the same display size and orientation (e.g. a 9” single landscape bracket and a 9” dual landscape bracket) can be connected together to form an expanded array of mast-mounted performance displays, using hex nuts located at the top of each bracket.
Note:
For more information on assembling an array of multiple mast brackets, refer
to the following section: Assembling mast bracket arrays (p. 3 )
Parts supplied
- Alpha Series display mast bracket (9” landscape bracket illustrated).
- Documentation pack.
- (2x with single mast bracket / 4x with dual mast bracket) P-clips — used to a fix cables to the mast.
- (4x with single mast bracket / 8x with dual mast bracket) M4x14 Hex socket drive screws — used to secure the Alpha Series display to an Alpha Series mast bracket.
- (4x with single mast bracket / 8x with dual mast bracket) M4x9 Flat washers — used to secure the Alpha Series display to an Alpha Series mast bracket.
- (2x) M5x16 Hex socket drive screws — used to secure the Alpha Series mast bracket to another Alpha Series mast bracket.
- (2x) M5x10 Flat washers — used to secure the Alpha Series display mast bracket to another Alpha Series display mast bracket.
Note:
For more information on how to connect together 2 Alpha display mast brackets
in an array, refer to: Assembling mast bracket arrays (p. 3 )
Single mast bracket dimensions (portrait)
Alpha 7 performance display single portrait mast bracket:
Item | Dimension |
---|---|
A | 156.00 mm (6.14 in). |
B | 217.00 mm (8.54 in). |
C | 55.55 mm (2.19 in). |
D | 144.10 mm (5.67 in). |
E | 39.63 mm (1.56 in). |
F | 120.00 mm (4.72 in). |
G | 181.34 mm (7.14 in). |
Alpha 9 performance display single portrait mast bracket:
Item | Dimension |
---|---|
A | 185.00 mm (7.28 in). |
B | 265.50 mm (10.45 in). |
C | 55.47 mm (2.18 in). |
D | 186.13 mm (7.33 in). |
E | 39.69 mm (1.56 in). |
F | 120.00 mm (4.72 in). |
G | 229.79 mm (9.05 in). |
Single mast bracket dimensions (landscape)
Alpha 7 performance display single landscape mast bracket:
Item | Dimension |
---|---|
A | 217.00 mm (8.54 in). |
B | 156.00 mm (6.14 in). |
C | 56.31 mm (2.22 in). |
D | 153.46 mm (6.04 in). |
E | 39.1 mm (1.54 in). |
F | 110.00 mm (4.33 in). |
G | 137.97 mm (5.43 in). |
Alpha 9 performance display single landscape mast bracket:
Item | Dimension |
---|---|
A | 265.50 mm (10.31 in). |
B | 185.00 mm (7.28 in). |
C | 56.34 mm (2.22 in). |
D | 184.53 mm (7.26 in). |
E | 39.08 mm (1.54 in). |
F | 120.00 mm (4.72 in). |
G | 167.59 mm (6.60 in). |
Dual mast bracket dimensions (landscape)
Alpha 7 performance display dual landscape mast bracket:
Item | Dimension |
---|---|
A | 217.00 mm (8.54 in). |
B | 303.00 mm (11.93 in). |
C | 56.31 mm (2.22 in). |
D | 153.46 mm (6.04 in). |
E | 39.10 mm (1.54 in). |
F | 120.00 mm (4.72 in). |
G | 284.53 mm (11.20 in). |
Alpha 9 performance display dual landscape mast bracket:
Item | Dimension |
---|---|
A | 265.50 mm (10.45 in). |
B | 362.00 mm (14.25 in). |
C | 56.34 mm (2.22 in). |
D | 185.48 mm (7.30 in). |
E | 39.08 mm (1.54 in). |
F | 120.00 mm (4.72 in). |
G | 341.87 mm (13.46 in). |
Bracket mast size compatibility
Before obtaining and attempting to install an Alpha display mast bracket, ensure that the diameter of your mast does not exceed the minimum and maximum mast bracket tolerances specified below.
Important :
- Depending on the diameter of your mast, one or more of the following accessory mast brackets may not be appropriate for the size of your mast.
- Exceeding the specified mast bracket tolerances may cause damage to the bracket and any attached products.
Single mast bracket tolerances (portrait):
Display variant | Minimum and maximum mast tolerances |
---|---|
Alpha 7: | 90 mm (3.54 in) min — 150 mm (5.91 in) max |
Alpha 9: | 120 mm (4.72 in) min — 210 mm (8.27 in) max |
Single mast bracket tolerances (landscape):
Display
variant| Minimum and maximum mast tolerances
---|---
Alpha 7:| 90 mm (3.54 in) min — 150 mm (5.91 in) max
Alpha 9:| 120 mm (4.72 in) min — 210 mm (8.27 in) max
Dual mast bracket tolerances (landscape):
Display
variant| Minimum and maximum mast tolerances
---|---
Alpha 7:| 90 mm (3.54 in) min — 150 mm (5.91 in)
max
Alpha 9:| 120 mm (4.72 in) min — 210 mm (8.27 in)
max
Location requirements
Before proceeding, ensure that you have read and understood the location requirements listed below and throughout the Alpha Series Performance Display Installation Instructions document (87457).
Hollow mast cable routing
Cables connected to an Alpha performance display may be routed inside a hollow
mast.
If you run any cabling inside a mast, take the appropriate measures to:
- Prevent the cables from chafing where they enter and exit the mast.
- Minimize electrical interference by:
– Not running the cables near other electrical equipment.
– Not running the cables alongside other power or antenna equipment cabling.
Warning: 2 person installation required
To prevent potential product damage, vessel damage and personal injury, a
2-person installation is recommended.
It is recommended that one person holds the display and mast bracket in the
mounting position, while another person secures the bracket to the mast.
Tools required
The following tools are required for installation:
- Power drill.
- Pozidrive screwdriver.
- Drill bit.
- 3 mm & 4 mm Hex wrench (Allen key) set.
Note:
The appropriate drill bit size is dependent on the thickness and material of
the mounting surface.
Assembling mast bracket arrays
In order to connect together 2 Alpha Series mast brackets (which are appropriate for the same display size and orientation):
- Place 2 Alpha Series mast brackets appropriate for the same display size and orientation (e.g. a 9” single landscape bracket and a 9” dual landscape bracket) on top of one another, so that the hexagon rivet nuts on the bottom bracket align with the fixing holes on the top bracket.
- Feed the supplied M5 flat washers over the supplied M5 hex socket drive screws.
- Insert the M5 hex socket drive screws (with M5 flat washers attached) through the fixing holes on the top bracket and into the hexagon rivet nuts on the bottom bracket.
- Tighten the M5 hex socket drive screws using a Hex wrench (Allen key), until the 2 brackets are firmly secured to one another.
Important:
Check the security and integrity of the mounted array before finalizing your installation. If necessary, obtain replacement or additional mounting screws to ensure a secure installation.
Single mast bracket mounting (portrait)
Follow these instructions to mast mount your Alpha Series performance display
using the single portrait mast bracket (Alpha 7 / Alpha 9 — A80713 / A80716).
Before mounting the product, ensure that you have:
- Selected a suitable location, based on the suggested location requirements.
- Identified the relevant cable connections and the route that the cables will take.
- Routed the cables through the mast, if required.
-
Route the display’s cables (not shown in the above drawing) and then fit the display, as follows:
i. Route the cables behind the mast bracket, and then feed through the mast bracket to the display, from the rear of the mast bracket.
ii. Connect the routed cables to the display.
iii. Place the display into the mast bracket. -
Feed the supplied M4 flat washers over the supplied M4 hex socket drive screws.
-
Insert the M4 hex socket drive screws (with M4 flat washers attached) through the mast bracket fixing holes, and into the rear of the display. Tighten the M4 hex socket drive screws using a Hex wrench (Allen key) until the display is firmly secured to the bracket.
-
Hold the bracket in place at your chosen location, then secure the bracket on both sides of the mast using fixings that are appropriate for the mast’s thickness and material.
Important:
Check the security and integrity of the mounted product before finalizing your
installation. If necessary, obtain replacement or additional mounting screws
to ensure a secure installation.
Single mast bracket mounting (landscape)
Follow these instructions to mast mount your Alpha Series display using the single landscape mast bracket (Alpha 7 / Alpha 9 — A80713 / A80716).
Before mounting the product, ensure that you have:
- Selected a suitable location, based on the suggested location requirements.
- Identified the relevant cable connections and the route that the cables will take.
- Routed the cables through the mast, if required.
-
Route the display’s cables (not shown in the above drawing) and then fit the display, as follows:
i. Route the cables behind the mast bracket, and then feed through the mast bracket to the display, from the rear of the mast bracket.
ii. Connect the routed cables to the display.
iii. Place the display into the mast bracket. -
Feed the supplied M4 flat washers over the supplied M4 hex socket drive screws.
-
Insert the M4 hex socket drive screws (with M4 flat washers attached) through the mast bracket fixing holes, and into the rear of the display. Tighten the M4 hex socket drive screws using a Hex wrench (Allen key) until the display is firmly secured to the bracket.
-
Hold the bracket in place at your chosen location, then secure the bracket on both sides of the mast using fixings that are appropriate for the mast’s thickness and material.
Important :
Check the security and integrity of the mounted product before finalizing your installation. If necessary, obtain replacement or additional mounting screws to ensure a secure installation.
Dual mast bracket mounting (landscape)
Follow these instructions to mast mount 2 Alpha displays, using the dual
landscape mast bracket (Alpha 7 / Alpha 9 — A80713 / A80716).
Before mounting the product, ensure that you have:
- Selected a suitable location, based on the suggested location requirements.
- Identified the relevant cable connections and the route that the cables will take.
- Routed the cables through the mast, if required.
-
Route each display’s cables (not shown in the above drawing) and then fit the displays, as follows:
i. Route the cables behind the mast bracket, and then feed through the mast bracket to the displays, from the rear of the mast bracket.
ii. Connect the routed cables to the displays.
iii. Place the displays into the mast bracket. -
Feed the supplied M4 flat washers over the supplied M4 hex socket drive screws.
-
Insert the M4 hex socket drive screws (with M4 flat washers attached) through the mast bracket fixing holes, and into the rear of the displays. Tighten the M4 hex socket drive screws using a Hex wrench (Allen key) until the displays are firmly secured to the bracket.
-
Hold the bracket in place at your chosen location, then secure the bracket on both sides of the mast using fixings that are appropriate for the mast’s thickness and material.
Important:
Check the security and integrity of the mounted products before finalizing your installation. If necessary, obtain replacement or additional mounting screws to ensure a secure installation.
Alpha Series Performance Display Mast Bracket Installation Summary
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>