Q-TRAN QZ-DALI-DT8 Class 2 LED Power Supply Instructions
- June 15, 2024
- Q-TRAN
Table of Contents
Top View
Driver Compartment
Wiring Compartment
QZ Components
- Driver Compartment
- Wiring Compartment
- Mounting Tab Slots
- Mounting Tab Holes
Required Hardware
Mounting Foot
Mounting
- The QZ-DALI can be mounted either vertically or horizontally, utilizing the supplied screws and the mounting tabs on the bottom of the enclosure.
**CENTER HOLE
SIDE SLOTS
**
-
The QZ-DALI must be mounted into a stud for sufficient support, using either the center holes or the slots of each mounting tab.
CENTER HOLE
SIDE SLOTS
-
When installing multiple QZ-DALI power supplies, separate the enclosures by 3” of space from edge to edge. This prevents the rise of ambient temperature between the power supplies.
Horizontal mount illustrated above
Vertical mount illustrated above
- Wiring diagram.
Wiring from power supply to light fixture must be single multiconductor cable
QZ-DALI 96W
Top View
WIRING COMPARTMENT VIEW
© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-09-13-23
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>