GE Profile PP9830DRBB 30 InchBuilt-In Electric Cooktop with 4 Burners Instruction Manual
- June 9, 2024
- GE Profile
Table of Contents
GE Profile PP9830DRBB 30 InchBuilt-In Electric Cooktop with 4 Burners
PP9830DR
GE Profile™ Series 30″ Downdraft Electric Cooktop
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
WALL INSTALLATION
Wall installations require 25″ countertop depth. When cabinet is flush against the wall, the fan housing can be rotated to the horizontal position for direct venting through rear wall. Make a countertop cutout in the range cabinet according to unit dimensions and installation type. Duct hole is positioned in back of cabinet for through-the-wall ducting.
PENINSULA OR ISLAND INSTALLATION
For peninsula/islands a minimum 26″ countertop depth is suggested. Blower should be in vertical position. Island or peninsula cabinets may require adjustment in cutout depth and/or location within the width dimensions. Duct hole is positioned in bottom of cabinet for island or peninsula installation.
SLAB INSTALLATION
For peninsula or island installation and rear wall ducting, 6″ PVC duct or locally approved piping should be used if installing under a poured concrete slab.
KW RATING
- 240V 9.1
- 208V 6.9
*Note: A 6″ minimum spacing to adjacent side wall is required Dimension and installation information are shown in inches.
RECEPTACLE LOCATION
Install an approved junction box within shaded area shown in diagram. Junction box must be at least 10-1/2″ below top of cabinet.
INSTALLATION INFORMATION
Before installing, consult installation instructions, packed with product, for
current dimensional data.
NOTE: Electrical cable is not supplied with unit.
Order part number JXCK89 from your Ge Appliances Dealer
These cooktops are approved for indoor use only.
INSTALLING THE DUCTWORK
Use galvanized or aluminum duct in 6″ round or 3-1/4″ x 10″ size, or
combination of both. PVC duct or locally approved piping should be used if
installing under a poured concrete slab. Local building code must be followed
in specifying type and schedule of all duct used.
NOTE: Ductwork must be vented to outside. Do not vent into a wall,
ceiling, crawlspace, attic or any concealed space. Always use an appropriate
roof or wall cap with damper.
Laundry-type wall caps should never be used. For maximum efficiency use
the shortest and straightest duct run possible, with as few fittings as
possible.
For satisfactory performance the duct run should not exceed 100 feet
equivalent length. Refer to the table of equivalent lengths (shown in
installation instructions) for various duct configurations.
FEATURES AND BENEFITS
Downdraft Exhaust – Powerful exhaust system effectively pulls
smoke and steam out of the kitchen
Ceramic Glass Cooktop – A smooth cooktop surface makes cleaning quick and
easy
Ribbon Heating Elements – Provide powerful heat beneath a smooth glass
surface to ensure even heat and fast warm-up times
Bridge Element – Combines three cooktop elements into one large cooking
area, ideal for oversized cooking pans 9″/6″
Power Boil Element – Accommodates various-size pots or pans and 3,000
watts of power speeds the boiling process
Three Speed Downdraft Fan – Powerful three speed exhaust system
effectively pulls smoke and vapors out of the kitchen
Frameless Design – A smooth and seamless cooktop surface makes cleaning
quick and easy
Model PP9830DRBB – Black on black
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand?
GE cooktops are guaranteed for an exact fit or GE
Appliances will pay up to $100 toward modifications
Visit geappliances.com for more info