WORKPRO 8517865 Momentum Mesh High-Back Active Chair User Manual

MOMENTUM
MESH HIGH -BACK
ACTIVE CHAIR

Momentum Mesh High-Back Active Chair

CHAISE ACTIVE EN SUPPORTS UP TO 275 LBS
Assembly instructions and warranty information
Date Manufactured Lot #
version. 0722
Item 8517865

Thank you for purchasing this product. We trust that you will be completely satisfied with your product for years to come. This product ls backed by limited lifetime warranty and has been crafted with today’s lifestyle in mind.
Call Us First!
DO NOT RETURN TO STORE.
For immediate help with assembly or product informatior
Call our toll-free number: 1-800-949.9974
Mon-Fn 8am to 8pm EST
Our staff is ready to provide assistance.
Damaged or mlssing parts ship from our facility In 1-2 business days.
Maximum weight capacity: 275 lbs (125kg). Record date of purchase below and save this booklet for future reference. Cal for parts & service 1.800-949.9974.For customer support, Vendor Sticker can be found on the underside of Seat Cushion (B).
NOTES:

• Please read the instruction sheets completely before assembly.
• Remove all parts from carto n and ensure all parts are included prior to assembly
• Assemble the chair on the carton or carpet to prevent scratching the chair.
• Exa mine all packaging material and remove stap les bef ore discarding carton.
• Be careful not to cross-thread screws.
• Do not use power tools.

WARNING
Due to the stool’s higher seat height, please exercise caution when sitting down to prevent a loss of balance or fall which could cause injury.
Date Purchased:
Customer service 1-800-949-997 4

Parts

| |
---|---|---
Bolts (M6’20mm)
Qty. 2
Spare 1| Decorative cover
Qty. 2
Spare 1| Bolts (” 2″) with washers
Qty. 4
Spare 1
| |
Bolts (“1-¥”) with washers
Qty. 2
Spare 1| Bolts (M8′ 25mm)
Qty. 3
Spare 1| Allen Wrench
Oty. 1

Step 1. Turn the Star Base (E) upside down. Press the Casters (F) into holes at the end of each leg. Tum the Star Base (E) upright and insert Gas Lift (0) into the center hole of Star Base (E).

Step 2. For easy assembly, place Seat Cushion (B) face down on a raised flat surface. Attach Armrests (C) tothe Seat Cushion (B) as shown using 2 Bolts (J) & 4 Bolts (I) with washers. Tighten the Bolts Fully with Allen Wrench(L).

|
---|---
4(Qty)
Bolts (e2)
Used to complete this step| 2(Qty)
Bolts (1/2.-1/211)
Used to complete this step

Step 3. Clamp the top of the Back Cushion (A3) into the Back Bracket (A2) slot as shown.

1. Insert the plastic block on the one side directly into the slot on the back bracket(A2);
2. Align the plastic block on the other side with the slot;
3. Insert the plastic block along the opening angle of the slot.
   

step 4. Assemble the lower part of double back frame (A3) to the back bracket by using 2 Bolts (G) with Allen Wrench (L) and 2 Decorative Covers (H).

|
---|---
2(Qty)
Bolts (M6 20mm)
Used to complete this step| 2(Qty)
Decorative cover Cach
Used to complete this step

Step 5. Assemble Back Cushion A2 to Seat Cushion (B) and secure in place using 3 Bolts (K) as shown.
Tighten the bolts fully with Allen Wrench (L).

3(Qty.)
Botts (M8 25mm)
Used to compiete this step
Step 6. Turn assembled seat upright and locate central hole below Seat Cushion (B) over Gas Lif (D) Push down firmly until connection is secure.
step 7. Loosen 2 bolts with plastic plate from the Headrest(A1). Attach the Headrest(A1) to the back Bracket(A2) by matching the concave-convex point of the plate and bracket. Use wrench (L) to lock the bolts.
Step 8. Before using your Chair, ensure that all the bolts are tightened fully for safety. You can now enjoy the comfort of your new Chair!
NOTE : Please keep the wrenches and check all bolts periodically to ensure these remain tightly fastened.
IMPORTANT FOR YOUR SAFETYI
During assembly, make sure to tighten all bolts completely to ensure that back isfastened properly. Also, after assembly, check bolts regularly to make sure that they remain completely tightened. You can now enjoy the comfort of your new chair!
NOTE : Please keep the wrenches supplied in order to periodically check and tighten bolts. REMOVING SEAT PLATE FROM GASLIFT
Raise the chair to the highest level, then step on the base(E), buckle the handle end seat cushion(B with two hands. Shake the seat (B) to separate the gas lifl(D).
REMOVING GAS LIFT FROM STAR BASE
Hold the chair base (E), and hit the bottom of the gas lift (D) with the soft hammer to remove the gas lift (D) from the base (E)
Care and cleaning instructions for the fabric:
Wipe with a clean cloth dampened with a mild upholstery detergent solution.
A soft bristle may be used to remove ingrained soil.
Spot clean as above.
Treat spills and stains as soon as possible.
Persistent stains may require treatment by a professional cleaner.
Many be cleaned with dry powder cleaners.
Allow to dry thoroughly before reuse

Operating instructions

TILT TENSION
When seated, the weight balance mechanism adjusts tilt tension automatically according to users’ body weight.
Maximum weight capacity: 275lbs (125kgs).

TO ADJUST THE HEADREST
While seated, hold headrest frame and move up or down, back and forth to adjust height and position.

TO ADJUST LUMBAR SUPPORT
Pull/Reset the backrest to the highest point until you hear the “click” sound, push the backrest to the best position for your back.

TO ADJUST SEAT HEIGHT
Reach underneath the right side of the seat and locate the lever. While seated, lean forward, lifting your body weight from the seat. Pull the lever upwards to allow the chair to rise to the desired height. To lower the seat height, lift the lever upwards while remaining seated.

TO ADJUST ERGONOMIC BACK
While seated, you can move your body with the double backrest to left and right for 15 degree

TO ADJUST SEAT DEPTH
To move the seat forward or backward, reach underneath the left side of the seat and locate the back lever.
Push the lever forward. When the lever is in this position, the seat is free to move forwards and backwards.
To lock the seat in a position, set the seat depth at the desired point and return the lever to the original middle position.

TO OPERATE TILT LOCK
Pull up the front handle on the left side of the seat shell to make the back tilt in the unlocking state. In the meanwhile, lean back to a desire angle and then pull the handle down to make the locking mechanism lock again.

TO ADJUST ARMREST HEIGHT
To raise armrests, pull upwards /downwards while pushing the lever under the Armpad.

TO ADJUST ARMRESTS FORWARD & BACKWARD
To adjust the armpad forward & backward by pushing the armpad.

TO ADJUST ARMRESTS WIDTH
To adjust the armpad, push the armpad left and right.

TO ADJUST ARMRESTS ANGLE
The armpad angle can be changed to 3 possible positions which can be achieved by swiveling the armpads inward or outward.

360° SWIVEL
360° Seat swivel.
Office Depot, LLC Limited Lifetime Product Warranty
This limited warranty covers the onginal purchase of new product for normal commercial, personal or household use Office Depat, LLC (Offre Depad) warrants its products will be free from defects in materials and workmanship (normal wear and tear excepted), for the original purchaser from the date of purchase for as long as you own the char, except as provided below Office Depot, its option, will replace with a comparable product, free of charge, any product purchased from at that fails under normal use as a result of such defect This warranty does nat apply to damage caused by fire, accident, negligence, misuse, use other than as stated in product instructions, improper cleaning, normal wear and tear, or other circumstances not directly attnbutable to defects in materials and workmanship.
Natural variations occurring in wood or other materials will not be considered defects , and Office Depot does not warrant the color-fastness or matching of colors, gr ains, or textures of such materials. This warranty does not apply to: modifications of the product , attachment s to the product not approved by Office Depot, and products that were not installed, used, or maintained in accordance with product instructions and warnings.
Proof of purchase is required in the form of a receipt (copy or onginal) to validate warranty. Warranty claims without the receipt may be rejected.
If Offce Depot chooses to provide a refund for such product, t will be fulfilled in the form of an Office Depot Merchandise card Claims fulfilled in this manner take approximately 30 days to process.
OFFICE DEPOT PROVIDES THIS LIMITED WAARANTY IN LIEU OF ALL OTHER WARRANTIES EITHER EXPRESS OR IMPLIED EXPRESSLY
EXCLUDED ARE ALL WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY OFFICE DEPOT’S SOLE OBLIGATION ANO THE USER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY SHALL BE LIMITED TO THE REPAIR, REFUND (IN THE FORM OF AN OFFICE DEPOT MERCHANDISE CARD) OR REPLACEMENT AT OFFICE DEPOT ‘S SOLE DISCRETION AND COST, OF PRODUCT OR COMPONENTS.
IN NO EVENT SHALL OFFICE DEPOT, ITS AFFILIAT ES, SUBSIDIARIES OR PARENT COMPANIES BE RESPONSIBLE FOR CONSEQUENTIAL,
SPECIAL, OR INCIDENTAL DAMAGES ARISING OUT OF A CLAIM OF DEFECTIVE PRODUCT EVEN IF OFFICE DEPOT HA S BEEN NJ VISED
OF THE POSSIBILITY OF SUCH DAMAGE.
SOME STATES OR PRO\i1NCES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTIAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS
SOME STATES OR PROMNCES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRAN TIES OR LIMITATIONS ON HOW LONGAN IMPLIED
MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIRC LEGAL RIGHTS, ANO YOU MA Y ALSO HA VE OTHER RIGHTS WHICH
MAY VAR Y BY STATE OR PROVINCE.
HIS WARRANTY APPLIES ONLY TO THE US AND CANADA
Service Instructions
Please call 1.800.-949.-9974 for warranty service (Mon -Fn, 8am to)

If you have any questions, please call 1-800-949-9974.
Distributed by: Office Depot, LLC
6600 North Military Trail, Boca Raton, FL 33496 USA
WorkPro is a registered trademark of OMX, Inc.
© 2021 Office Depot, LLC. All Rights Reserved.
Made in China

Documents / Resources

| WORKPRO 8517865 Momentum Mesh High-Back Active Chair [pdf] User Manual
8517865 Momentum Mesh High-Back Active Chair, 8517865, Momentum Mesh High-Back Active Chair, High-Back Active Chair, Active Chair, Chair
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>