Liquid LEDS 15 Meters Smart Colour String Lights User Manual

Smart Colour String Lights
User Manual

SAFETY INFORMATION

IMPORTANT: READ ALL THE SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE INSTALLING OR SERVICING THIS PRODUCT.
KEEP THIS MANUAL FOR REFERENCE.

Warning:
RISK OF ELECTRIC SHOCK

• Sockets used to power smart string lights should comply with all national and local electrical codes. If you are unsure of compliance requirements, please consult your local electrician.

• Do not operate the bulbs without tightening string lights, making sure to unplug the smart string lights during installation to avoid damage to the power cord and lamp assembly during installation.

• Do not use in water. Do not use extension cords or places where water may accumulate near water. Take care to keep the bulb at least 8meters from the surface of the water. Keep the plug and socket dry.

• Do not install the smart light string in a position where you can step on it.
  Not be allowed for children to play smart string lights should be installed out of reach of children.

• SAA recommends testing power plug and outlets monthly to ensure proper operation.

• Regularly check the smart string lights for physical damage or other damage caused by outdoor exposure to components, and replace any damaged smart string lights components in time.

RISK OF FIRES
Smart String Lights are designed to be mounted with their individual keyhole mounting feature.
Do not mount Smart String Lights by using the main electrical cord or the individual drop cords.
Smart String Lights are designed to have limited linkability by using their electrical plugs and receptacles.
Do not mount Smart String Lights in any position where the bulb is facing up.
Do not allow the LED lamp assemblies to be in contact with combustilble materials.

LED lamp assemblies should hang freely and not be susceptible to repetitive damage caused by environmental conditions such as wind, rain, and ice.
Not intended for installation in ceilings, soffits, cabinets, attics, or other enclosed spaces.

SAA Notice:
Operation is subject to the two following conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with SAA. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

CAUTION: Suitable for outdoor /indoor use only.
DO NOT IMMERSE IN WATER DO NOT EXCEED RATED CAPACITY

Thank you for purchasing the LiquidLEDs Smart String Lights
The LiquidLEDs Smart String Lights are perfect for any occasion! Control your String lights using Alexa, Google Voice Assistant or control them with any WiFi-enabled smartphone/tablet in the tuya smart app (available for Android or iOS). The Tuya smart app allows you to control the Smart String Lights throughout your entire house, indoors and out, at the touch of a button. Turn your lights on and off from anywhere!

Inside the package you’ll find:

Specifications:

Overall Length: 15 meter
Number of Sockets: 15
Bulbs Included: 15
Input Volts: 110-250 V AC
Output Volts: 12 V DC
Rated Wattage: 7.5 W
Max Wattage: 24 W
Bulb Wattage(each): 0.5 W
Cord Color: Black
Bulb Color: RGBCW

Step 1: Initial Setup

1. Carefully unpack Smart String Lights from the box.
2. Before installing, plug the Smart String Lights into an outlet to ensure all lights work properly.

IMPORTANT: Unplug the Smart String Lights prior to mouting

Step 2: Installing

1. Attach to structure to the sixth or seventh holder in middle of each String Light.
2. Attach to structure on first and last holder.
3. Installing by Structure Connect securely to structure at the beginning,middle and end of each string light.

NOTE: Attachment hardware, such as hooks or nylon cables ties is not included.

Installing By Guide Wire
Attach ring at the back of every bulb holder to the guide wire using an S-hook or cable tie (not included)

Step 3: Plug – In
Plug LiquidLeds Smart String Lights into any standard outlet

Step 4: Download App
Download the Tuya App from the App Store or Google Play.

Step 5: Register

1. Enter your mobile phone number or email address.

Step 6: Add Device

1. Enter your mobile phone number or email address.

1. Select “Add Device” or click”+”at the top right corner of the homepage| 2. Click “Add” from Discovering devices
---|---

3. Hold the power button for about 5 seconds until the bulb on the string lights flashes rapidly, and then press “Continue light blinks rapidly” on the APP page.

Step 7: Plaese make sure you are in close proximity of router.

Enter your 2.4GHz Wi-Fi network and password.| The Tuya smart App will connect your device.
---|---

Congratulation!
Now you can use Tuya App to control your string lights

Scenes
The Tuya APP has a scene selection function.
Press the scene button to enter the scene selection interface.
You can choose your favorite scenes as you like.

Select light scene

Schedule
The Tuya App is free to add and set the working time of the LiquidLEDs Smart Light String, which can be turned on and off freely according to the set time.

Steps to set the time

Hold “Schedule” for 2 seconds Start entering the setup interface| Select the time to set, Choose whether you want to repeat the settings.
---|---

Schedule
Steps to set the time

Select the time to repeat the setting
within a week| Define whether the set time is the beginning or
the end of the work
---|---

Troubleshooting:

Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the Wi-Fi setup.Check whether there are problems with your internet connection. If Wi-Fi signal is too weak, reset your Wi-Fi router and try again.

Setup is not working properly.

1. Close all apps that are running in the background then re-open the Tuya app.
2. Uninstall and reinstall the Tuya smart app then repeat the setup process.

Smart String Lights are not responding to Tuya App.

1. Check if Smart String Lights are turned off. If yes, turn them on and waituntil Smart Bulb reconnects with the Wi-Fi network automatically.
2. Check if there are problems with your internet connection.

If necessary,reset your wireless router and try again.
How many colors can I pick from?
Smart String Lights Use RGB LEDs, allowing you to choose from millions of colors per bulb. Using the Tuya smart App on your smart device, you can choose the exact color(s) you want for your color sequence.

Download Free App:Email: help@liquidleds.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>