Zeeva SP-0893 Bassjaxx wireless speaker Instruction Manual
- June 5, 2024
- Zeeva
Table of Contents
Instruction Manual
Thank you for purchasing the Adventure Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using it.
Product Overview
Package Contents
Adventure Wireless Speaker x I pc
Micro U58 Charging Cable x 1 pc
Instruction Manual x 1pc
Power on/Off
Power on
Slide the ON/OFF switch to the ‘OW position.
Power off Slide the ON/OFF switch to the -OFF position.
Note Always side the Power a/n(4h to OFF’ position when not in use.
Pair a Wireless speaker with your mobile device
- Keep the distance between your wireless speaker and mobile phone (or other demos) within 32.8 Feet
- Power on the wireless speaker.
- Activate the Bluetooth function on your phone within range and select ST ADVENTURE SPIC from the bet shown.
- You we near a beep Seurat when pawing is successful
Reconnect the Wireless speaker to your mobile device
When powered on, the wireless speaker will automatically connect with the
last successfully paired device.
Charging your Wireless speaker
**** For your safety. please always use the appropriate 5V input charger/Adapter to charge the product. DO NOT Uft Quick Charging USB Adapter to charge the product. es it might damage the product.
- Use the Micro U58 cable provided with this wireless speaker.
- Connect the Micro USB plug to the Micro USB charging port on the speaker. Men conned the USB dug too 1)58 port on a computer or wad adopter to begin charging.
- The light will turn red while charging and will turn off once fully charged.
NOTE:
- You must select a called larger horn from a regular manufacturer.
- You must charge the Wireless speaker if it has been not used for more than 12 months.
Technical specification
Denver Diameter 52mm I
impedance: 4 Ohms
Power Supply: Li-ion Battery 3.7V 300 mAh
Play Tae: 2-3 Hours
Charging Time: 1.5-2 Hours
Bluetooth Range. 32.8 Feet
Bluetooth Version: 5.0
Micro USB Cable Included
FAQ
- If the Wireless speaker cannot be paired with your device. please try the following: Ensure that your speaker is in pairing mode or reconnection mode. Ensure that the Bluetooth search function of your mobile device is activated.
- If the Wireless speaker cannot be recharged: If you use a power outlet. ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USD port is powered.
**** & Safety instructions for the lithium battery and charging the product
– The input voltage to the product is DC 5V 1A.
– In order to charge the product in a safe manner and in reliable conditions.
please only adopt a certified appropriate charger/ adapter for charging the
product.
– Only charge the product at ambient temperatures between 10 deg ‘Cl 50 deg e
F and 40 deg °C1104 deg ‘F.
– Do not heat above 70 deg -01158 deg “F. eg. Do not expose to sunlight or
throw into fire.
– Switch off the product after use.
– When the device is fully charged, disconnect the charger from the device
and unplug the charger from the power outlet Do not leave charging overnight.
– Please note that we won’t take any responsibility for any wrong operation
(eg. Voltage higher than 5V) as this may result in severe injury or loss of
property, and we cannot control the operating process during the time the user
using this product
– In extreme cases, abuse or misuse of the Lithium battery pack can lead to an
explosion and heat generation. fire development or smoke devetopment_
CAUTION:
- Do not fully submerge in water. This item is IPX4 resistance only.
- Keep the device dry. Avoid dusty, and dirty environments. Using the device in these environments may damage the circuitry.
- Do not use the device during thunderstorms to avoid any lightning-related damage or injury.
- Do not attempt to disassemble or remanufacture the device, insert foreign objects into it, or immerse or expose it to water or other liquids. Doing so may lead to fire, explosion, or other hazards.
- Keep the device away from excessive heat sources and direct sunlight. Do not place it on or in heating devices, such as microwave ovens, stoves, or radiators. The device may even explode in extreme overheating circumstances.
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements.
FCC ID: 2ADM5-SP-0893
Keep all relevant information for future reference
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>