TOKK CAM T6 Instruction Manual
- June 6, 2024
- Tokk
Table of Contents
CAM T6
Instruction Manual
Thank you for your purchase.
We hope you will enjoy your new TOKK CAM.
If you encounter any issues setting it up and/or using your new Camera, please
do not hesitate to call us and we will be very happy to help you.
You can also watch our step by step demo video on our website:
www.tokktech.com
Our customer service email is
contact@predtechnologies.com
Our customer service phone number is +1 858 999 2114 ext1
Quick Set up and User Guide
- Download the application called “iCookyCam” on your smart device (APP available on the App Store for iOS and Google Play for Android)
Android
http://www.cookycam.cn/download/iCookyCam.apk
|
ios
https://itunes.apple.com/cn/app/icookycam/id1412586837?mt=8
---|---
2. If you have an SD card, insert it in the Micro-SD Slot.
–> in motion detection mode you will receive a notification and the footage
will be recorded on the SD card, if you do not have an SD card you will
receive a notification and will have to open the app and record manually, the
footage or picture will be stored on your smart device.
-
Turn on the camera
Pay attention to the direction of the memory card! -
open the app “iCookyCam”
-
add the camera (using the “+” sign on the app)
-
select “not been connected to the router”
-
go to WIFI settings on your smart device
-
wait until your camera name appears “iCooky_XXXXXX”, it might take 2 to 3 minutes for the camera to set itself, so wait and refresh your wifi until the camera appears as a choice when it appears select it, (it should ask you for the password, type “12345678” and join), wait for iCooky… to connect, you might have to type the password a couple of times
-
go back to the app “iCookyCam”, press “next”
-
add device password “ok123456” and change the name Camera to the name you want your camera to be called (if you have multiple ones this might come in handy, to name Entrance, Lobby, Room 1…) then click on the checkmark “V” on the upper right corner of the app.
-
a message “connect to router” appear: -if you want to connect your camera to your wifi to keep it at home press “yes” then select the name of your Home Wifi router and type your password.
-
When you see the message “camera successfully added”, and a black screen with the camera status “online” you have successfully set up with your TOKK Cam. Turn off the camera and turn it on again to finalise the setup. It should say online, select the image and touch the play icon, the live feed of the camera will appear. If the camera says offline, refer to troubleshooting in the next two pages.
A. 1st Screen of iCookyCam app
B. Screen after selecting the camera
Using TOKK Cam:
Power ON: Press and hold the confirmation button for 3 seconds
Power Off: Press and hold the confirmation button for 5 seconds and release,
the camera will turn off after a few seconds
Open your iCookyCam APP, select your camera, and press play.
Use the speaker icon to turn on the listen to function, the camera icon to
take a picture, the video camera icon to record, change the Light setting (for
night vision), and change the angel (Flip the camera). In the setting menu you
can turn on the Motion sensor (this will trigger an alert message and start
filming), change password, reset to factory setting, and much more…
Tips:
Using the camera outside your home: Turn on the camera, go to the iCookyCam
app select the camera. If it says offline check that iCookyCam is selected in
your Wifi settings. If it is not just select it and return to your app.
Troubleshooting: To Add the camera device manually: Click the “+” to add
a device, select “been connected to the router”. Press on the pencil icon
(bottom right), type in the UID of the camera you want to add (you can find the
UID behind the camera. Type in the password “ok123456” and change the name of
the camera if you wish to, click on the checkmark (upper right corner).
Complete Instruction Manual
- Download APP
Scan QR Code or search keyword “iCookyCam” to download and install the APP from the application market.
Android
http://www.cookycam.cn/download/iCookyCam.apk
| 
ios
https://itunes.apple.com/cn/app/icookycam/id1412586837?mt=8
---|---
2. Power ON / Power OFF Operation
If you have a Micro SD Card proceed to 2.1, if you do not have a Micro SD
Card proceed to 2.2.
2.1 Insert Micro SD Card: Class10 or above is recommended. Maximum
support 64GB, Please format the memory card before using it.
Warm Prompt: Pay attention to the direction of the memory card!
2.2 power ON: Connect the camera to the power supply or long-press
confirmation button for 3 seconds, Red & Blue indicator keeps on and then
alternate scintillation, the camera starts to initialize(it takes around 60
seconds). After initialization succeeds Blue indicator flashes slowly, the
camera enters AP connection mode and starts recording automatically. Press the
confirmation button once to stop video recording, the blue indicator keeps on
and the camera turns to standby mode.
Warm Prompt:
1. If you want to power on without connecting to the USB charger, make sure
that the camera has enough power!
2.1f after initialization succeed red indicator flashes slowly, showing that
the machine is in the IP connection mode, please double click the confirmation
button to return to AP connection mode, and the blue indicator flashes slowly.
2.3 If the memory card is not inserted, the red and blue indicators
flicker at the same time when the machine is initialized, and the camera can’t
turn on the video. The memory card does not support hot-swap, if you want to
pull off or insert the memory card, Please turn off the camera first.
2.4 Power OFF: long press confirmation button for 5 seconds, Red & Blue
indicator flashes for 7 times and turn off.
Warm Prompt: It is not possible to power oft the camera through the above
operation when USB power is connected.
- Connect the Camera to the App
3.1 Go to WIFI settings on your smart device, choose Power “iCooky ” from available networks when prompted for a password, type “12345678” and join.
**Warm Prompt: The effective range of the
WiFi signal iCooky sent by the camera is within 10 meters. When the mobile
phone exceeds the range, it will be disconnected from the WiFi signal.
3.2 log into the iCookyCam APP, click the “+” in the middle or below the interface, then choose “Not been connected to the router”, click “Next” to enter the add device interface, input “ok123456” in the device password bar and then click “fr, APP will prompt “Connect to the router?”, please select “Yes” to enter the “Wi-Fi Network” setup interface. Choose the network you want to connect and input the right Wi-Fi password, then click “Connect”(P 3.2.1-3.2.7)
**Warm Prompt: For your personal privacy, please change the default password of the camera
| 
---|---
Warm Prompt:
1. Please choose the right network and type in the correct password. The
camera turns to AP mode if the wrong password were typed in, blue indicator
flashes slowly in AP mode. Please click Delete on APP and withdraw from APP,
check out APP, and add a device again.
2. In order to improve the stability and success rate of WiFi connection,
try to be close to the wireless router.
3. For initial use, the device requires a certain amount of time for IP
connection. Please wait patiently. ( About 1-3 minutes based on network
conditions). After the IP connection is successful, the red indicator flashes
slowly. After multiple refreshes, if still showing offline, please try to
check the network environment of the device and the mobile phone is good or
not.
4. SSID with special characters and 5G network are both not compatible
with APP. Only 2.4G frequency WiFi is supported, 5G frequency WiFi is not
supported temporarily, and WiFi encryption mode can not be WEP mode, and the
password can not be emp ty.
3.3 The camera starts to restart after clicking “Connect”, Please wait
for about 90 seconds, at the same time, APP automatically returns to the
device list interface and successfully adds the camera to the list. The red
indicator flashes slowly after the camera reboots, and the camera turns into
IP connection mode. Click the camera in the list to preview the image and
control the camera. (P 3.3.1-3.3.2)
-
If you do not want to connect the Camera to your Home or Office WIFI:
4.1 If you need only AP connections but not IP connections, please select “No” when prompted “Connect to the router?” in the above P3.2.6 operation steps. APP automatically returns to the device list interface and successfully adds the camera to the list. Click the camera in the list to preview the image and control the camera.(P 4.1.1-4.1.3)
4.2 To switch from IP connection mode to AP connection mode: Please double-click the Confirmation button.
Marks:
AP connection mode: Camera connect to Wi-Fi of smartphone for the short distance preview image. IP connection mode: Camera connect to the router for the unlimited distance preview image. -
Add the camera manually
If the camera has been connected to the Internet to work in IP remote mode, when you want to add the camera to other people’s APP please open APP on the other’s phone, click the “+” in the middle or below the interface, select the “Been connected to the router” and enter to the” Lan Search” interface. (P 5.1-5.3)
5.1 Search addition under the same
WiFi If the mobile phone and the camera are connected to the same WiFi, then
the “Lan Search” interface will automatically search all the camera serial
numbers under the WiFi, select the camera that you need to add, and input
device password (the default password is”ok123456″) can be added successfully.
(P 5.1.1-5.1.2)
5.2 Adding your camera to another
Smart Phone: Open the APP that has already added the camera, find the camera
that needs to be added in the device list, and click the share button in the
lower right corner to automatically generate a camera QR code. Open the APP on
the phone that needs to add the camera, enter the “Lan Search” interface,
click the QR code scan button in the lower-left corner to open the scan
window, scan the generated camera QR code, and then input the correct device
password to add.(P 5.2.1-5.2.5)
| 
---|---
5.3 Manual input addition Open the APP that needs to add the camera,
enter the “Lan Search” interface to select the manual add button in the lower
right corner, and input the correct device UID and password in the “Add
Device” interface to be added successfully.(P 5.3.1-5.3.2)
-
Interface introduction
6.1 Device list interface
6.2 Real-
time interface
6.3 Setting
interface
-
Reset Device Password
Under IP connection & standby mode (red indicator keeps on), connect the USB power for a charge, long-press the confirmation button for 5 seconds, the red and blue indicators flash quickly. The machine will reboot automatically after successful reset P.W..lt takes about 1 minute, Please wait patiently. -
Indicator
Camera Mode
|
Indicator Status
---|---
AP Connection Mode| Blue Indicator
IP Connection Mode| Red Indicator
Recording Mode / Standby Mode| Indicator Flashes Slowly / Keeps on
No Memory Card| Blue & Red Indicator Flashes at the same time
Pred Technologies USA Inc Customer Service
Our website: www.tokktech.com
Our customer service email is
contact@predtechnologies.com
Our customer service phone number is +1 858 999 2114 ext 1
Pred Limited Warranty
Pred Technologies USA Inc. warrants this product against defects in material or workmanship as follows:
-
Labor and Parts: If this product is determined to be defective.
Pred Technologies will repair or replace the product, at its option, at no charge.
From and for a period specified by the retail partner you have purchased our product from. -
Proof of purchase in the form of a bill of sales or receipted invoice which is evidence that the unit is within the Warranty period must present to
obtain warranty service. -
To obtain warranty service, please contact our customer support center: Via email contact@tokktech.com or call 1 858 999 2114 ext 1
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Thanks
Pred Technologies USA Inc.
© 2020 PRED Technologies USA Inc. All Rights Reserved.
Features, specifications, and appearance are subject to change without notice.
Manufactured & Distributed by: PRED Technologies USA Incorporated,
7855 Fay Avenue, La Jolla, CA 92037
predtechnologies.com
References
- Pred Technologies - TOKK™, Fingerprint Locks, Smart Cameras...
- Discover the innovative world of TOKK™ | Pred Technologies
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>