INSIGNIA NS-MUTC2U/ NS-MUTC2U-C All-in-One Travel Converter QUICK SETUP GUIDE

QUICK SETUP GUIDE

INSIGNIA NS-MUTC2U/ NS-MUTC2U-C All-in-One Travel Converter

Before using your new product, please read these instructions to prevent any damage.

PACKAGE CONTENTS

• All-in-One Travel Converter
• Quick Setup Guide

Check out these important safety instructions to keep yourself and your devices safe.

• Before using the converter/adapter, check the product you intend to connect to the converter/adapter for the manufacturer’s voltage and wattage rating, which should be located on the product.
  Caution: Adapter mode does not convert voltage. To avoid damaging your device, select the Converter mode when appropriate.

• The converter cannot be used with low-wattage appliances (0–25W).

• Converter mode is designed to be used only for short periods of time (approximately 10 minutes).

• Do not leave the converter/adapter in the power outlet when not in use. Do not continue to use the converter/adapter if it is not working properly, has been damaged, or has been dropped in water.

• Check your appliance label to see if it requires less than 2.5 A.

• No grounding. This product is for use with unearthed or double-insulated appliances only.

• The adapter-only function should be used with dual-voltage appliances. The converter combo should be used with single-voltage appliances.

Warning: This product is intended for adult use. This product is NOT intended for use by unsupervised children. Choose proper settings and plug in this product before directly supervising children using devices connected to this product.

Do not use the converter for electronic controlled appliances.

FEATURES

MAKING SURE YOUR DEVICE IS COMPATIBLE

Warning: Failure to select the correct voltage setting could damage your device.

1. Determine the voltage of the power outlet you want to use. See Step 4 for common voltages.
2. Check the voltage of the device you want to connect to the power outlet.
3. Compare the power outlet voltage to your device’s voltage, then use the table to the right to decide which mode to use (adapter or converter).
   Note: The voltage of some devices will be a range. If your power outlet voltage is in the range of your device’s voltage (for example, a 120-240V device and a 240V power outlet), use ADAPTER mode.

Notes:

• Use Adapter mode for dual-voltage devices (those listed as 110V/220V AC, 120V/240V AC).
• Use Adapter mode for devices such as laptop computers and battery chargers because they automatically adjust to 110V or 220V power.
• If the power outlet is 100V and your device is 120V, you may use the adapter.

4. Check the wattage of your device.
If you use ADAPTER mode:

If you use CONVERTER mode:

SELECTING YOUR PLUG

Find the power outlet you want to plug your device into. The outlets are shown next to the plugs.

1. Locate the button for the country you are in.

2. Make sure that each plug is pushed in completely before you push out a different plug.
   Note: Your All-In-One Travel Converter has a lock and release feature that prevents you from selecting more than one plug at a time. Do not try to disable this feature.

3. Gently press the button, and then completely push out the plug.

USA/CHINA button
North America (USA, Canada, & China)
Flat parallel, 120V

USING YOUR CONVERTER/ADAPTER

1. Mark sure that your device is compatible and that you have selected the correct plug
2. Slide the Adapter/Converter switch to select the correct mode (Adapter or Converter).
3. Connect your device to the converter/adapter outlet, then plug the converter/adapter into a power outlet.

Note: When in converter mode, only use this product for short periods of time (approximately 10 minutes).

TROUBLESHOOTING

My converter/adapter or device is humming

• It is normal to hear a humming sound from your converter/adapter or device.

My device stopped working

• If your device has a built-in thermostat, it may have shut off prematurely.
• Make sure that you have selected the correct settings.
• Wait for your device to cool down, then resume normal operation.

My device is working slowly

• Some devices may operate slower in foreign countries that use 50Hz of current (the U.S. operates on 60Hz).

I don’t know my device’s voltage or wattage

• Check on your device, its power adapter, or in its manual.
• To calculate wattage, multiple voltage by amps (for example, 100V × 2.5 A = 250W).
• Contact the device’s manufacturer.

SPECIFICATIONS

• Adapter mode: 100–240VAC, 2.5 A Max. 50/60Hz

• Converter mode:
  • Input: 220–240VAC, 50Hz
  • Output: 110–120VAC, 2000W Max. 50Hz

• USB charging ports: +5VDC, 2.4 A total

LEGAL NOTICES

FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if it is not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ICES-003 Statement
This Class B digital apparatus complies with Canadian ICES-003.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority for recycling advice.

ONE-YEAR LIMITED WARRANTY

For complete warranty,
visit www.insigniaproducts.com.

CONTACT INSIGNIA

1-877-467-4289 (U.S. and Canada)
or 01-800-926-3000 (Mexico)
www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy
and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
Made in China

Read More About This Manual & Download PDF:

INSIGNIA NS-MUTC2U/ NS-MUTC2U-C All-in-One Travel Converter QUICK SETUP GUIDE – Download

Questions about your Manual? Post in the comments!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>