Kruger Matz KM0675 Wired headphones Owner’s Manual

Kruger Matz KM0675 Wired headphones

Specifications

• Model: KM0675
• Languages: RO, PL, NL, EN, DE
• Microphone: Yes
• RGB backlighting: Yes

Product Description

The wired headphones KM0675 are a high-quality audio device designed for comfortable and immersive listening experiences. With a built-in microphone and RGB backlighting, these headphones offer both functionality and style.

Safety Instructions

Before using the wired headphones KM0675, please read and follow these safety instructions:

1. Do not expose the headphones to extreme temperatures or direct sunlight.
2. Avoid using the headphones at high volumes for extended periods to prevent hearing damage.
3. Keep the headphones away from water and other liquids.
4. Do not disassemble or modify the headphones.

Product Usage

1. Connecting the Headphones

To use the wired headphones KM0675, follow these steps:

1. Locate the audio jack on your device (e.g., smartphone,
   computer).

2. Insert the headphone plug into the audio jack firmly.

2. Adjusting the Fit

To ensure a comfortable fit, follow these steps:

1. Adjust the headband to fit your head size.
2. Place the earcups over your ears.
3. Adjust the earcup position for a snug fit.

3. Using the Microphone

The wired headphones KM0675 come with a built-in microphone for hands-free communication. To use the microphone, follow these steps:

1. Locate the microphone on the headphones.
2. Unmute the microphone by pressing the microphone mute button.

4. RGB Backlighting

The wired headphones KM0675 feature RGB backlighting for a stylish look. To control the RGB backlighting, follow these steps:

1. Find the RGB backlighting switch on the headphones.
2. Toggle the switch to turn the RGB backlighting on or off.

SAFETY INSTRUCTIONS

Read this instruction manual and keep it for future reference. The producer does not take responsibility for damages caused by inappropriate handling and use of the product.

• Read the instruction manual before first use and keep it for future reference.
• Minimize the volume on your audio device before connecting the headphones in order to avoid hearing damage from sudden exposure to excessive volume. Keep the volume at a reasonable level throughout entire time of using the headphones. To prevent damage to your hearing, do not raise the volume too high.
• Do not use the headphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling).
• Never use the headphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.
• Stop using the headphones if you feel tinnitus, hearing discomfort, irritation or have other adverse reactions.
• Do not attempt to repair this device yourself. In case of damage, contact with an authorized service point for check-up/repair.
• Do not subject the headphones to strong impact.
• Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.
• Protect this product from moisture, humidity, water and any other liquid.
• Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
• Never use this device if it is damaged.
• Use only authorized accessories

PRODUCT DESCRIPTION

1. Volume knob
2. RGB backlight switch
3. Microphone mute switch
4. Microphone

OPERATION

1. When using the headphones with a PC, laptop or console, connect them to the device using a USB.
2. Use volume knob to change the volume.
3. Use microphone mute switch to mute the microphone.
4. To turn the RGB backlight on or off, slide the RGB backlight switch.

SPECIFICATION

surround sound system

• Speaker size: 40 mm
• Magnet: ferrite
• Voice coil: CU
• Frequency response: 20 Hz – 20 kHz
• Impedance: 20 Ohm +/- 15%
• SPL: 112 dB (@ 1 kHz)
• THD: = <5% (@ 1 kHz)
• Sensitivity: 112 +/- 3 dB (@ 1 kHz)
• Nominal input power: 10 mW
• Maximum input power: 20 mW
• Microphone sensitivity: -42 dB -/+ 2 dB
• Microphone S/N ratio: min. 58 dB (@1 kHz)
• RGB backlight
• Weight: 285 g
• Dimensions: 180 x 210 x 100 mm
• USB cable: 205 cm

LEARN MORE

For more information on this device visit: www.krugermatz.com. Read the owner’s manual carefully before using it. Visit www.krugermatz.com website for more products and accessories. In case of any doubts or questions reach out to our Frequently Asked Questions

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>