WORKPRO W001309AU Water Pump Pliers Instruction Manual
- June 15, 2024
- WORKPRO
Table of Contents
WORKPRO W001309AU Water Pump Pliers
WARNING
- To reduce the risk of injury, the user must read and understand the operator’s manual
- Chiron should be supervisor to chiura trainee on not pay min inset prance
- There is a risk of product damage or injury. Do not use for any other purpose.
- Do not use this product for tasks beyond its capacity. Do not exudes the maximum cutting capacity of the pliers. This can damage the tock and may cause injury.
- Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) and protective gloves when
- Ways check that all mourner bots and nuts are boo rely tenoned belle Wang. Tran pans ale Mondo Nat use this product until the missing parts are replaced. When servicing, use only identical replacement parts.
- Use of any other parts may create a hazard or cause product damage.
- Always fellow the manufacturer’s instructions and recommendations when using pliers. Failure to do so can result in injury or damage to the tool
- Do not use pliers as hammers or pry bars.
- Do not use pliers near flammable or explosive materials. Sparks or heat generated by the fool can ignite these material’s.
- Do not use grip handles for jibe requiring insulated handles. The grips do not protect against electric shock.
- Do not mode of alter the less in any way. This can compromise their safety and effectiveness
- The handed of the pliers can only be held by hand, and other methods cannot be used to apply force (such as hitter all a rammer, stamping with a bench www, bic
INTRODUCTION
FAST ADJUSTABLE GROOVE JOINT PLIERS WITH ROTARY SWITCH
- By rotating the stich to adjust hers to different positions to meet different sizes of components. Max, opening of 8 (200mm) plaits: 1.5° (40mm) Mar. opening of 10 (250mm) fliers: 2.0° (52mm)
- Premium Chrome Vanadium steel for high strength and durability.
- Black phosphating frisking makes the pleas more corrosion-resistant.
- V-Jaw design provides multiple points of contact for stronger grip on objects. Powerful angled teeth for secure grip and long tool life, fit to use on pipes, rods, shafts and fasteners of flat, round, square and hex shapes.
- Designed with a nonslip ergonomic handle for better grip.
CLEAN AND MAINTENANCE
- Using your pliers, wipe them down with a clean towel, make sure they are clean and dry, and coat them with oil to prevent pliers from rusting.
- Regularly check whether all parts are in good condition. If any parts are damaged or work, replace them Immediately. Do not use a damaged or whom part, as it may break or malfunction during use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>