Avantree BTSP-860-T Soundbyte T Portable FM Radio with Bluetooth Speaker User Manual

: June 15, 2024
: Avantree

Table of Contents

Avantree BTSP-860-T Soundbyte T Portable FM Radio with Bluetooth Speaker
PRODUCT INFORMATION
Box Contents
Product Introduction
Using as an FM Radio
Using with Your Bluetooth Headphones
Using as a Bluetooth Speaker
Using as a MicroSD Card Player
Charging
Specifications
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Avantree BTSP-860-T Soundbyte T Portable FM Radio with Bluetooth Speaker

PRODUCT INFORMATION

Specifications

Model No.: BTSP-860-T
Channels: 1
FM Radio: Yes
Bluetooth: Yes
MicroSD Card Slot: Yes
Charging Port: Type C
Audio Input: 3.5mm AUX

FAQ

Q: Where can I purchase accessories for the Soundbyte T?
A: You can view and purchase Soundbyte T accessories on the Avantree website at avantree.com/soundbyte-t/accessories.
Q: How many FM channels can be saved on the Soundbyte T?
A: You can save up to 20 FM channels on the Soundbyte T, with 5 channels per page and a total of 4 pages.
Q: How do I book a setup appointment with a support agent?
A: You can book a 1-on-1 setup appointment with one of our support agents on the Avantree website at avantree.com/book-a-call.

Video Guide

Prefer to watch a video tutorial? Scan the QR code below or visit avantree.com/soundbyte-t/video for a step-by-step guide.

Book an Appointment
You can also book a 1-on-1 setup appointment with one of our support agents at avantree.com/book-a-call

Box Contents

$Avantree-BTSP-860-T-Soundbyte-T-Portable-FM-Radio-with-Bluetooth-Speaker- $2$$

To view and purchase Soundbyte T accessories, please visit avantree.com/soundbyte-t/accessories

Product Introduction

Product Overview

$Avantree-BTSP-860-T-Soundbyte-T-Portable-FM-Radio-with-Bluetooth-Speaker- $3$$

Button Functions

$Avantree-BTSP-860-T-Soundbyte-T-Portable-FM-Radio-with-Bluetooth-Speaker- $4$$

Using as an FM Radio

STEP 1
For first time use, the radio will automatically enter FM mode (if not, press ) and auto-scan for FM channels by default (if not, press the SCAN button). Please wait until auto-scan is complete.
STEP 2
Press the button once to select your channel.
STEP 3
To save a channel, press the PAGE button once, then press & hold the 1 2 3 4 5 buttons. The screen will display “Saved to P#-#” to indicate that the channel has been properly saved. $Avantree-BTSP-860-T-Soundbyte-T-Portable-FM-Radio- with-Bluetooth-Speaker- $8$$
NOTE 1: In “P1-2”, 1 indicates the page number, and 2 indicates the number button.
NOTE 2: There are 4 total pages and 5 channels can be saved to each page (for a total of 20 channels). Press the PAGE button once to swap between pages.”
STEP 4
To jump to a saved channel, press the corresponding number button once.
NOTE: If you saved the channel to pages 2 / 3 / 4, you’ll need to press the PAGE button until you reach the proper page before pressing the corresponding number button.

Using with Your Bluetooth Headphones

The Soundbyte T can wirelessly transmit FM / micro SD / AUX audio signals to your Bluetooth headphones.

STEP 1
Ensure the speaker is in FM, micro SD, or AUX playing mode. It will NOT work in Bluetooth speaker mode.
STEP 2
Press & hold the button for 2 seconds. The screen will display as follows.
Step 3
Put your headphones into PAIRING mode.
Step 4
Keep your headphones & the Soundbyte T close to each other. Once they successfully connect, the screen will display as follows.
NOTE1: Most cases where your device & the radio fail to connect happen because the device is not properly placed into PAIRING mode. Double check that your device is successfully in PAIRING MODE (typically indicated by an LED indicator’s alternate red & blue flashes). For more details, please refer to your device’s online user manual.
NOTE2: Bluetooth devices normally automatically reconnect to their last paired / connected device. You may need to turn the Bluetooth OFF on any previously used devices in order to avoid interference.

For Subsequent Use
Turn on both the radio and your headphones and press the button once. They should automatically reconnect. If not, repeat the steps above to re-pair them.

Using as a Bluetooth Speaker

STEP 1
Turn on the Soundbyte T and press the button once to enter Bluetooth speaker mode.
STEP 2
Activate Bluetooth on your device (i.e. your phone, tablet, laptop, etc.) and select “Avantree Soundbyte T.”
STEP 3
Keep the two devices close to each other. Once they successfully connect, the screen will display as follows.

For Subsequent Use
Every time you turn it on, the speaker should automatically reconnect to the last connected device. If not, select “Avantree Soundbyte T” on your device.

Using as a MicroSD Card Player

When you insert a microSD card ( not included ), the radio will automatically switch to microSD mode if the radio is on. If the radio is off when you insert the card, you’ll need to press the button to switch to microSD mode. The Soundbyte T supports MP3 / WMA / WAV / APE / FLAC file formats.

Repeat / Shuffe Settings

Press the ****button once to enter the system settings.
Press ****to select “REPEAT / SHUFFLE”, then
press **** to select the desired option and
press ****once to confirm.

Repeat/Shuffle

Back
Repeat All
Repeat One
Repeat Folder
Shuffle

NOTE: The Soundbyte T cannot read microSD cards larger than 32GB.

Charging

A icon will flash on the Soundbyte T’s screen to indicate low battery. You can charge the radio using any USB adapter with a 5V/0.5-1A output (i.e. your phone charger or similar) via the included USB C charging cable.
The icon on the LCD screen will flash while charging and stop once charging is complete. It takes about 3 hours to fully charge the radio.

Configuring the System Settings
Turn on the device and press the ****button once to enter the system settings.

System Settings

…
Backlight
Contrast
Factory Reset
…

Press to select your desired option, then press ****to confirm your selection.

Specifications

FM frequency range: 87MHz – 108MHz
Frequency range: 160Hz – 20KHz
Power: 6W(dual 3W speakers)
Battery: 18650 lithium rechargeable 2200mAh battery
Playtime: Up to 11hrs
Charging voltage: 5V /1A
Operating range: Up to 30ft / 10m
Supported profiles: HFP v1.5, A2DP v1.0, AVRCP v1.4
Product size: 14.3 cm x 7 cm x 3 cm
Product weight: 270g

FAQ

Below are some of the most common questions people have during setup.

Can I replace the battery?
Yes. You can purchase a replacement battery at avantree.com/soundbyte-t/accessories or use any 3.7V 18650 lithium-ion battery.
Why is my FM reception so bad?
Why is my microSD card not working?
Why are my headphones failing to connect?

For answers to questions like these and for a full FAQ list, you can visit avantree.com/support/soundbyte-t, or you can contact us directly for additional assistance.

Contact Us