Spigen PE2109UJ ArcStation Pro GaN 1402 Wall Charger User Manual

Spigen PE2109UJ ArcStation Pro GaN 1402 Wall Charger

Product Information

Specifications

• USB-C Output: 100-240V~, 50/60Hz, 2.0A MAX
• Dimensions: 30.0 x 73.0 x 73.0mm / 1.22 x 1.22 x 1.26in
• Weight: 325.0g / 11.46oz

Product Usage Instructions

Note: USB Cable not included.

Caution

• To ensure your safety and obtain maximum charging speeds, please use the cable provided by Spigen or the manufacturer of your device, or certified (Such as MFi).

EN: Spigen (MFi)

Important Safety Instructions

1. The product is designed and developed for use with IT equipment only.
2. No naked flame sources – such as candles – should be placed near the product.
3. The disconnection from line voltage is caused by the AC plug.
4. Please discard the product if the cords or plugs are damaged.
5. Wipe the product with a dry cloth to clean it.
6. The socket outlet shall be installed near the equipment and shall be easily accessible.
7. The power supply is not intended to be repaired by service personnel (the product can be discarded in case of failure or component defects).

FAQ

• Q: What should I do if I have any issues or concerns with the product?
• A: Please contact us at the following email addresses based on your location:
• US, EU & Others: [email protected]
• KR: [email protected]
• We are prepared and ready to solve your problems!
• Q: Who is the distributor of this product?
• A: The product is distributed by Spigen, Inc. in Irvine, CA 92618, USA.
• Q: Who is the manufacturer of this product?
• A: The manufacturer is Spigen Korea Co., Ltd.
• Q: What are the importer’s contact details for FCC matters?
• A: The responsible party for FCC matters is Spigen Inc. with the following contact information:
• Address: 9975 Toledo Way #100, Irvine, CA 92618 USA
• Email: spigen.[email protected].

Instruction

1. Plug it in.
2. Charge your phone tablet or laptop.

• To ensure your safety and obtain maximum charging speeds, please use the cable provided by Spigen or the manufacturer of your device, or certified(Such as MFi).

Important Safety Instructions

1. The product is designed and developed for use with IT equipment only.
2. While the product is in use, the maximum ambient temperature must not exceed 25°C.
3. No naked flame sources – such as candles – should be placed near the product.
4. The disconnection from line voltage is caused by the AC plug.
5. Please discard the product if the cords or plugs are damaged.
6. Wipe the product with a dry cloth to clean it.
7. The socket outlet shall be installed near the equipment and shall be easily accessible.
8. The power supply is not intended to be repaired by service personnel (the product can be discarded in case of failure or component defects).

Specifications

• Model: PE2109UJ
• Input: 100-240V~, 50/60Hz, 2.0A MAX
• USB-C Output: Single Port Use: Total 140.0W MAX
• USB-C Output 1: 5.0V 3.0A, 9.0V 3.0A,
  • 12.0V 3.0A, 15.0V 3.0A, 20.0V 5.0A, 28.0V 5.0A
  • Total: 140.0W MAX
  • PPS 3.3V~21.0V 5.0A(MAX) Total: 100.0W MAX
• USB-C Output 2: 5.0V 3.0A, 9.0V 3.0A,
  • 12.0V 3.0A, 15.0V 3.0A, 20.0V 5.0A, 28.0V 5.0A
• Total: 140.0W MAX
  • PPS 3.3V~21.0V 5.0A(MAX) Total: 100.0W MAX
• Dual Port Use: Total 127.0W MAX
• USB-C Output 1: 5.0V 3.0A, 9.0V 3.0A, 12.0V 3.0A,
  • 15.0V 3.0A, 20.0V 3.35A Total: 67.0W MAX
  • PPS 3.3V~16.0V 4.3A(MAX) Total: 65.0W MAX
• USB-C Output 2: 5.0V 3.0A, 9.0V 3.0A, 12.0V 3.0A,
  • 15.0V 3.0A, 20.0V 3.0A Total: 60.0W MAX
  • PPS 3.3V~16.0V 4.3A(MAX) Total: 60.0W MAX
• Total Output: 140.0W MAX
• Dimensions: 30.0 x 73.0 x 73.0mm /1.22 x 1.22 x 1.26in
• Weight: 325.0g / 11.46oz

Caution

• Keep away from extreme temperatures.
• Do not expose to liquids.
• Avoid dropping.
• Do not dismantle.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The following importer is the responsible party (for FCC matters only) Spigen Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA E-mail : [email protected].

IC Statement

This digital apparatus complies with CAN ICES-003(B)/NMB-003(B) This device complies with Industry Canada license ICES-003.
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Customer Service

• 24-month limited warranty

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given under this limited warranty.

CONTACT

• US, EU & Others: [email protected]
• KR: [email protected]
• We are Prepared and Ready to Solve Your Problems!
• US and Canada Customers Only
• Distributed by Spigen, Inc. in Irvine, CA 92618, USA
• Manufacturer: Spigen Korea Co., Ltd.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>