PaiPaitek PD 526-TIO Bark Collar with Remote User Manual

PaiPaitek PD 526-TIO Bark Collar with Remote

Product Information

Specifications

• Product Name: PD 526-TIO Dog Training Collar
• Manufacturer: PaiPaitek
• Email: service20220613@gmail.com
• Country of Origin: CH

Safety Instruction

Training collars are used to train dogs and not for punishment. When used properly and with care, the collar can be a safe and effective tool for training. It helps build communication and strengthens the bond with your best friend. Please obey all safety
messages that follow this instruction to avoid possible injury. If your dog has heart disease, high blood pressure, cerebral thrombosis, skin allergies, etc., please do not use the collar.

Reinforce Learning Behaviours

Using the dog training collar can help reinforce desired behaviors in your dog. By providing timely and appropriate feedback, you can effectively communicate with your dog and encourage positive actions.

Tips

Here are some tips to make the most out of your dog training collar:

• Start with low-intensity levels and gradually increase as needed.
• Use positive reinforcement techniques along with the collar.
• Be consistent in your training approach.
• Monitor your dog’s response and adjust the training accordingly.

Instruction of Auto Anti-Barking Function

The dog training collar is equipped with an auto anti-barking function. This function helps discourage excessive barking by providing a corrective stimulus when triggered by the dog’s barking. The intensity of the stimulus can be adjusted based on your dog’s needs.

Before Using the Dog Training Collar

1. Do not expose the collar to extreme heat or store it at temperatures above 113°F or 45°C.
2. Always keep the dog training collar out of reach of children.
3. Charge the remote transmitter and receiver for at least 2 hours upon receiving the item. The collar cannot receive any signals while it is being charged.

When Using the Dog Training Collar

1. Avoid leaving the collar on the dog for more than 18 hours per day.
2. If possible, reposition the collar on the dog’s neck every 1 to 2 hours.
3. Check the fit of the collar to prevent excessive pressure.
4. The charging rubber cap must be closely covered when your dog is swimming, or the receiver may get damaged when exposed to water. Taking off the receiver is recommended.
5. The receiver will turn off automatically after a 10-second beep sound when the battery is low.

Package Contents

The package includes the following items:

PD 526-1-TIO (For 1 dog)

• 1 x Remote Transmitter
• 1 x Receiver
• 1 x Collar Strap
• 1 x USB Charging Cable
• 2 x Long Conductive Silicone Caps
• 2 x Short Conductive Silicone Caps
• 1 x Lanyard
• 2 x Long Contact Points
• 2 x Short Contact Points
• 2 x Anti-Shock Pads
• 1 x Test Lamp
• 1 x User Manual

PD 526-1-TIO (For 2 dogs)

• 1 x Remote Transmitter
• 2 x Receiver
• 2 x Collar Strap
• 1 x USB Charging Cable
• 4 x Long Conductive Silicone Caps
• 4 x Short Conductive Silicone Caps
• 1 x Lanyard
• 4 x Long Contact Points
• 4 x Short Contact Points
• 4 x Anti-Shock Pads
• 1 x Test Lamp
• 1 x User Manual

PD 526-3-TIO (For 3 dogs)

• 1 x Remote Transmitter
• 3 x Receiver
• 3 x Collar Strap
• 1 x USB Charging Cable
• 6 x Long Conductive Silicone Caps
• 6 x Short Conductive Silicone Caps
• 1 x Lanyard
• 6 x Long Contact Points
• 6 x Short Contact Points
• 6 x Anti-Shock Pads
• 1 x Test Lamp
• 1 x User Manual

Maintenance

1. Please regularly examine the tightness of the remote transmitter and eliminate any external damage.
2. Clean the screw caps with alcohol every week.
3. Examine your dog’s neck and carry out weekly cleanup.
4. The battery is rechargeable. To maintain battery life, please charge it every 2 months if it is not often used.

FAQ

• Q: Can the dog training collar be used for punishment?
  A: No, the dog training collar is not intended for punishment. It should be used to train and reinforce positive behaviors in dogs.

• Q: Can I leave the collar on my dog all day?
  A: It is recommended to avoid leaving the collar on the dog for more than 18 hours per day. If possible, reposition the collar on the dog’s neck every 1 to 2 hours.

• Q: How do I charge the remote transmitter and receiver?
  A: The remote transmitter and receiver can be charged using the included USB charging cable. Follow the instructions in the user manual for detailed charging steps.

• Q: Can my dog wear the collar while swimming?
  A: It is not recommended to expose the receiver to water. The charging rubber cap must be closely covered when your dog is swimming to prevent damage to the receiver. Taking off the receiver is recommended.

• Q: How long does the battery last?
  A: The battery life may vary depending on usage. It is recommended to charge the collar every 2 months if it is not often used in order to maintain battery life.

• Q: What should I do if my dog has certain health conditions?
  A: If your dog has heart disease, high blood pressure, cerebral thrombosis, skin allergies, or any other health conditions, please do not use the dog training collar. Consult with a veterinarian for suitable training methods.

• Q: How can I adjust the intensity of the corrective stimulus?
  A: The intensity of the corrective stimulus can be adjusted using the controls on the remote transmitter. Refer to the user manual for detailed instructions on adjusting the intensity.

• Q: Is the collar suitable for all dog sizes?
  A: The collar comes with different sizes of collar straps and contact points to accommodate different dog sizes. Refer to the reference size chart in the user manual for guidance on selecting the appropriate size for your dog.

• Q: Is positive reinforcement necessary along with the collar?
  A: Yes, positive reinforcement techniques should be used along with the collar to effectively train your dog. Rewarding desired behaviors and providing praise will help reinforce the training process.

STATEMENT

• Thank you for purchasing the remote dog training collar PD 526-TO, this product has been tested to meet your stringent quality standards, and also covered with warranty for 12 months from the date of its original purchase. Please contact us with your order ID and problem or issue, we will respond within 24 hours.
• This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, or a failure to follow operating instructions provided with the product including adding essential oils directly into the tank and base.
• This warranty does not apply to normal wear and tear or commercial use. In no event shall liability exceed the purchase price paid by the purchaser of the product. under no circumstances shall there be liability for any loss- direct, indirect or incidental or consequential damage arising out of, or in connection with the use of the product.

SAFETY INSTRUCTION

Training collars are used to train the dogs and not for punishment. Use properly with care and the collar can be a safe and effective tool to train. Building communication and strengthening your bond with your best friend.
Obey all safety messages that follow this instruction to avoid possible injury.
If your dog has heart disease, high blood pressure, cerebral thrombosis, skin allergies, etc., please do not use it.

REINFORCE LEARNING BEHAVIOURS

If your dog knows the command but responds inconsistently than your requirement, a training collar can sharpen his skill.
For example, you have taught your dog to come when calling, but over time he responds slower. You can communicate with him via the remote transmitter so that he immediately responds to your call.

1. Set the collar to the initial stimulation level and test it.
2. Fit the collar on your dog’s neck along with his regular collar.
3. Let him roam around the training area. Then give the command and simultaneously press the stimulation button.
4. The instant your dog moves toward you, stop stimulation and praise him.
5. If he stops before he reaches you or turns away, repeat the command and continue the stimulation. Again, stop at the instant he runs to you and reward him by praising him or feeding him a treat. Repeat this for 3 or 4 times.

Tips

1. If he doesn’t get it for the first few times, don’t give up, and do not increase the stimulation. Try to work on this a few times.
2. During the training period never give the command if you are not able to enforce it. Your dog has to make the mental connection between the static shock/ vibration/beep to his behavior may take a week or more for some dogs).
   Altogether, both methods of stopping unwanted behavior and reinforcing learning behaviors can be applied to nearly every training scenario.

INSTRUCTION OF AUTO ANTI-BARKING FUNCTION

The auto anti-barking function is closed when out of the factory, please open it when needed.

1. Open and Close Auto Anti-barking Function:

2. Turn on the auto anti-barking function: Press the © button of the remote transmitter for 3 seconds, when hearing a ‘beep’ 1 time from the receiver, the auto anti-barking function opens;

3. Turn off the auto anti-barking function: Press the button of the remote transmitter for 3 seconds again, when hearing a ‘beep’ 2 times from the receiver, the auto anti-barking function closes.

4. How the Auto Anti-barking Collar Works:

5. The 1st time the dog barks, the device will alarm for 2 seconds;

6. The 2nd time the dog barks within 30 seconds, the device will alarm for 3 seconds;

7. The 3rd time the dog barks within 30 seconds, the device will alarm for 5 seconds and produce a weak static shock for warning;
   Work continues 7 times

8. Not to The times are warming ete static shock, and every time the snothe strength will increase to make the dog memorize and correct his bad behaviors.

9. The way of strengthening the stimulation progressively technique proves to be more humanized and effective.

10. The Self-protection Function of Anti-barking Collar:

11. To protect the dog, when continuing work 7 times, it will automatically one device will restore to me in all states, in 1 minute and stop working, then the device will restore to the initial state;

12. No matter how many times the device works, when the dog stops barking for 30 seconds, the device will return to its initial state.

BEFORE USING THE DOG TRAINING COLLAR

1. Do not expose to extreme heat or store at temperatures above 113°F or 45°C.
2. Please always keep the dog training collar out of reach of children.
3. Charge the remote transmitter and receiver for at least 2 hours when receiving the item. The collar can’t receive any signals while it is being charged.

WHEN USING THE DOG TRAINING COLLAR

1. Avoid leaving the collar on the dog for more than 18 hours per day.
2. If possible, please reposition the collar on the dog’s neck every 1 to 2 hours.
3. Check the fit to prevent excessive pressure.
4. The charging rubber cap must be closely covered when your dog is swimming or the receiver will get broken when getting into water from the interface. Taking off the receiver is recommended.
5. The receiver will turn off automatically after 10 10-second “beep” sound when the battery is low.

PACKAGE CONTENTS

PD 526-1-TIO (For 1 dog)

• 1 x Remote Transmitter
• 1 x Receiver
• 1 x Collar Strap
• 1 x USB Charging Cable
• 2 x Long Conductive Silicone Caps
• 2 x Short Conductive Silicone Caps
• 1 x Lanyard
• 2 x Long Contact Points
• 2 x Short Contact Points
• 2 x Anti-Shock Pads
• 1 x Test Lamp
• 1 x User Manual

PD 526-1-TIO (For 2 dog)

• 1 x Remote Transmitter
• 2 x Receiver
• 2 x Collar Strap
• 1 x USB Charging Cable
• 4 x Long Conductive Silicone Caps
• 4 x Short Conductive Silicone Caps
• 1 x Lanyard
• 4 x Long Contact Points
• 4 x Short Contact Points
• 4 x Anti-Shock Pads
• 1 x Test Lamp
• 1 x User Manual

PD 526-3-TIO (For 3 dogs)

• 1 x Remote Transmitter
• 3 x Receiver
• 3 x Collar Strap
• 1 x USB Charging Cable
• 6 x Long Conductive Silicone Caps
• 6 x Short Conductive Silicone Caps
• 1 x Lanyard
• 6 x Long Contact Points
• 6 x Short Contact Points
• 6 x Anti-Shock Pads
• 1 x Test Lamp
• 1 x User Manual

MAINTENANCE

1. Please examine regularly to ensure the tightness of the remote transmitter and eliminate any external damages.
2. Clean the screw caps with alcohol weekly.
3. Examine your dog’s neck and carry out weekly cleanup.
4. The battery is rechargeable. In order to maintain battery life, please charge it every 2 months if it is not often used.

SPECIFICATIONS

INTRODUCTION FOR THE BUTTONS

1. Signal Channel Button: Press this button, and choose channel 1, 2 or 3 as the signal channel of dog training before connecting the signals between remote transmitter and receiver.
   Note :

2. PD 526-1-TIO: For 1 dog only, 1 receiver, can choose any channel as your dog training signal, otherwise you have to connect the signals again when training your dog;

3. PD 526-2-TIO: For 2 dogs, 2 receivers, you can choose the same signal channel for the 2 receivers, or you can choose 2 signal channels, please remember the signal channel of each receiver;

4. PD 526-3-TIO: For 3 dogs, 3 receivers, you can choose the same\ signal channel for the 3 receivers, or you can choose 3 signal channels, please remember the signal channel of each receiver;

5. Power Button /Keylock of Remote: Press to turn the remote transmitter on and off.

6. Static Shock Button: Press the static shock button and the receiver will emit a static shock signal.

7. Vibration Button: Press the vibration button and the receiver will emit a vibration signal.

8. Tone Button: Press the tone button and the receiver will beep. The tone function is not adjustable.

9. LED Light Button

10. LED Light

11. +/- Button: Adjust the vibration and static shock level between 1-100; the sound function is not adjustable.

12. Charging Port of Remote Transmitter

13. Power Button of Receiver

14. Indicator Light of the receiver

15. Sensor Hole: It will receive the signal and active the device to work automatically when dog barks at the auto anti-barking mode.

16. Contact Points: Choose a suitable length to fit for different thickness of dog hair.

OPERATION AND CHARGING

How to Choose USB Charger
Please choose the USB charger with the parameters below we can charge the device by the charger of smart phone or laptop/ computer USB interface, before that please check if the charger is with the following parameters):

• Input: 100-240v ~ 50-60HZ
• Output: 5V 1000mA (or 300mA/500mA)

Charge the Remote Transmitter

1. Connect the charger cable to the charging port.
2. Plug the charger into a standard socket.
3. The battery icon will flash during charging and be solid when charging is completed.

Charge the Receiver

1. Open the rubber cover, and connect the receiver to a charger into a standard socket.
2. The red indicator light will flash slowly when the receiver is charging. After fully charged, the red indicator light keeps on.

To Turn the Receiver On and Off

1. up So. d, me the hatred over is tred ever will make a short
2. Turn off: Press the power button once, the receiver will make a long “beep” sound and the indicator light is not flash any more.

Check the Receiver Power
When the receiver is turned on, press the power button twice quickly to check the power:

• The receiver beeps 5 times, representing 100% (80-100%)
• The receiver beeps 4 times, representing 80% (60-80%)
• The receiver beeps 3 times, representing 60% (40-60%)
• The receiver beeps 2 times, representing 40% (20-40%)
• Receiver beep 1 time, representing 20% (1-20%)

HOW TO WEAR RECEIVER COLLAR CORRECTLY

The correct wearing position helps healthy and effective dog training.

1. The receiver shall be placed at the bottom of dog’s neck, and the conductive ilicone caps must contact the dog’s skin directly.
2. If your dog has thick hair on the neck, please use longer conductive silicone caps.
3. The anti-shock pads could prevent skin abrasion. It’s recommended to use 2-3 times a week.
4. The space between the receiver collar and the dog’s neck shall be maintained to a finger distance, which can’t be too loose, otherwise static shock effectiveness shall be badly influenced.
5. If the collar strap is too long, please cut off the extra part. Melt the burr edges with a lighter.

PAIRING AND TESTING

How to Pair the Remote Transmitter and Receiver

1. Open the remote transmitter, press the CH) button to choose a signal channel you want to use.
2. Hold power button on the receiver for 2 seconds, when the indicator light keeps flashing, press any one of the function button like sound, static shock and vibration on remote to pair.
3. If you do not press the function button within 10 seconds, please pair them again.
4. If you have multiple receivers, you can choose the same signal channel or choose another channel for pairing.

Test the Dog Training Collar

• Static Shock Function Test
  Static shock function can not be seen with the naked eye, please use our test lamp. Press the static shock function button, the test lamp will shine.

• Vibration Function Test
  Press the vibration function button, the receiver will shake.

• Tone Function Test
  Press the tone button, the receiver will make a beep sound.

1. You need to pair remote transmitter and receiver before using it on dog.
   Please follow the manual for the first time use.

2. Please keep in mind the dog channel you choose and do not change to other one, or the receiver will not receive signals.

3. When the remote transmitter is turned off, all the functions are locked except for the LED light.

REFERENCE SIZE FOR DIFFERENT DOGS

• Reference weight for dogs
• Large Dog (Body height above 24 inch, Weight above 88 Ibs)
• Medium Dog (Height 16-24 inch, Weight 24.2-66 Ibs)
• Small Dog (Height 10-16 inch, Weight 8.8-22 Ibs)
• Mini Dog (Height under 10 inch, Weight under 8.8 Ibs)

FAQ

• Q: How old my dog can use dog training collar?
  A: DO NOT use on puppies younger than 6 months.

• Q: Can I use dog training collar with more than one dog?
  A: Yes,you can simply add one or two receiver collars to the system to control two or three dogs, because three dog channels are available with one remote transmitter.

• Q: What’s the function of anti-shock pads?
  A: Anti-shock pads could prevent skin abrasion, avoid hurting dog’s skin when you do not need to use static shock function, and also it could be insulated from electricity

• Q: What should I do if my dog’s neck becomes red and irritated?
  A: Discontinue to use the dog training collar for a few days. If the condition persists beyond 48 hours, please ask your veterinarian to check. Continue to monitor your dog’s skin condition closely even if the skin becomes normal.

• Q: Can I attach a leash to the receiver collar?
  A: NO. This will result in pulling the screw caps (conductive silicone caps) too tightly against your dog’s neck. Use a separate collar placed above the receiver collar.

• Q: How do I know when to charge the batteries of the dog training collar?
  A: For Remote Transmitter: The battery level icon will be displayed on the left side of the LCD screen. For Receiver: press the power button twice quickly to check the battery level, if only one beep is emitted, charge it in time.

• Q: How long can I leave the receiver collar on my dog?
  A: The receiver collar is not designed to be worn constantly. We recommend wearing the collar on your dog less than 18 hours out of every 24 hours.

• Q: How long should I process my training session for my dog?
  A: Training sessions should be kept positive and short, it is better for about 10-15 minutes long each time.

• Q: What are the proper levels of vibration and static shock for my dog?
  A: Try to find the best suitable levels of vibration and static shock for your dog starting from the lowest level. Excessive levels of stimulation shall cause a strong response from your dog.

• Q: What is the effective distance of your dog training collar?
  A: Without obstacles, the effective distance could be as far as 1000 meters between the remote transmitter and receiver collar. However, in reality, a list of factors, including signal station, magnetic field, obstacle, battery volume, other wireless devices nearby, landform, vegetative cover, etc, shall influence the transmission of signals from remote transmitter and the actual effective distance of remote transmitter.

• Q: Any other better training methods?
  A: You can prepare some dog food for a training incentive to achieve better training outcomes.
  Each time you restrain your dog’s misbehavior, you can tell your dog what is supposed to do and what is not.
  And after a few times of repetitions, your dog will understand what you like and what you don’t like.

• Q: I want to test the static shock function of the receiver collar myself, but it does not work, is anything wrong?
  A: If you test the receiver collar by your hand or leg, please touch the 2 screw cap conductive silicone caps) without women time, touching only one screw

• Q: Once my dog is trained and has obeyed to my commands, is it still necessary for my dog to continue wearing the receiver collar?
  Alar from time to time to reinforce your dog’s memory with the receiver

• Q: If the dog training collar does not work, or my dog does not respond after the correct installation of the dog training collar, how should I solve this problem?

  • Make sure both the remote transmitter and receiver collar have enough power battery to operate.
  • Check to see if the receiver collar is turned on.
  • Check the signal channel button on the remote transmitter to ensure signal channels are correctly configured.
  • Try to pair the remote transmitter and receiver again.
  • Take off the receiver collar and test all of the three functions work properly.
  • Make sure the receiver collar is properly worn and the receiver collar is not loose.
  • Try to use long contact points to touch the dog’s skin or trim the hair around the dog’s neck.

WARRANTY

• This product is covered with warranty for 12 months from the date of its original purchase.
• Any defective part will be repaired or replaced at no charge if the appliance has not been tampered with and has been used according to these printed directions.
• If any problems occur, please contact the local dealer immediately to launch a warranty claim. Our consumer service representative will respond within 1 business day, advise you how to correct the problem yourself or instruct you on how to return the defective unit back to us for repair or replacement. service20220613@qmail.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>