PaiPaitek PD523V Vibrating Dog Collar No Shock User Guide

PD 523V
DOG TRAINING COLLAR
User Guide

STATEMENT

Thank you for purchasing the remote dog training collar PD 523V, this product has been tested to meet your stringent quality standards, and also covered with warranty for 12 months from the date of its original purchase.
Please contact us with your order ID and problem or issue, we will respond within 24 hours,
This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, or a failure to follow operating instructions provided with the product including ‘adding essential oils directly into the tank and base.
This warranty does not apply to normal wear and tear or commercial use. In no event shallliability exceed the purchase price paid by the purchaser of the product. under no circumstances shall there be liability for any lossdirect, indirect or incidental-or consequential damage arising out of, or in connection with the use of the product.

SAFETY INSTRUCTION

Training collars are used to train the dogs and not for punishment. Use properly with care and the collar can be a safe and effective tool to train.
Building communication and strengthen your bond with your best friend Obey all safety messages that follow this instruction to avoid possible injury.
If your dog has heart disease, high blood pressure, cerebral thrombosis, skin allergies, efc., please do not use it.
REINFORCE LEARNING BEHAVIOURS
If your dog knows the command but responds inconsistently with your requirement, a training collar can sharpen his skil.
For example, you have taught your dog to come when calling, but over time he responds slower. You can communicate with him via the remote transmitter, so that he responds to your call immediately.

1. Set the collar to initial stimulation level and test t
2.  Fitthe collar on your dog’s neck along with his regular collar.
3. Let him roam around the training area. Then give the command and press the stimulation button simultaneously
4.  If your dog moves toward you, stop stimulation and praise him.
5.  If he stops before he reaches you or turns away. repeat the command and continue the stimulation. Again, stop at the instant he runs to you and rewards him by praising him or feeding him a treat. Repeat this for 3 or 4 times.

Tips

1. 5If he doesn’t get it for the first few times, don’t give up and do not increase the stimulation. Try to work on this a few times.
2. During the training period never give the command if you are not able to enforce it. Your dog has to make the mental connection between the vibration/beep to his behavior (may take a week or more for some dogs) Altogether, both methods of stopping unwanted behavior and reinforcing leaming behaviors can be applied to nearly every training scenario.

BEFORE USING THE DOG TRAINING COLLAR

1. Do not expose to extreme heat or store at the temperatures above 113°F or 45°C.
2. Please always keep the dog training collar out of reach of children.
3.  Charge the remote transmitter and receiver at least 2 hours when receive them. The collar can’t receive any signals while itis being charged.

WHEN USING THE DOG TRAINING COLLAR

1. Avoid leaving the collar on dog for more than 18 hours per day.
2. If possible, please reposition the collar on the dog’s neck every 110 2 hours.
3. Check the fitto prevent excessive pressure.
4. The charging rubber cap must be closely covered when your dog is ‘swimming o the receiver will get broken when getting into water from the. interface. Taking off the receiver is recommended
5. The receiver wil tum off automatically after 10 seconds ‘beep” sound when battery is low.

PACKAGE CONTENTS

PD 523V-1 (For 1 dog)|
---|---
1xRemote Transmitter| 1x Receiver
1 Collar Strap| 1x User Manual
1x USB Charging Cable|
PD 523V-2 (For 2 dogs)|
1xRemote Transmitter| 2xReceivers
2xCollar Straps| 1x User Manual
1xUSB Charging Cable|
PD 523V-3 (For 3 dogs)|
1x Remote Transmitter| 3 x Receivers
3x Collar Straps| 1x User Manual
1x USB Charging Cable|

MAINTENANCE

1. Please examine regularly to ensure tightness of the receiver and eliminate any external damages.
2. Examine your dog’s neck and clean up weekly.
3. The battery is rechargeable. In order to maintain battery life, please charge it every 2 months i it is not often used.

SPECIFICATIONS

INTRODUCTION FOR THE BUTTONS

1. signal Channel Button: Press this button, choose channel 1, 2 or 3 as the signal channel of dog training before connecting the signals between remote transmitter and receiver.
   Note:
   PD 523V-1: For 1 dog only, 1 receiver, you can choose any channel as the signal channel for training your dog, please remember the signal channel you choose, otherwise you have to connect the signal again when training your dog; PD 523V-2: For 2 dogs, 2 receivers, you can choose the same signal channel for the 2 receivers, or you can choose 2 signal channels,  please remember the signal channel of each receiver; PD 523V-3: For 3 dogs, 3 receivers, you can choose the same signal channel for the 3 receivers, or you can choose 3 signal channels, please remember the signal channel of each receiver;

2. Power Button Of Remote: Press to tun the remote transmitter on or off.

3. Beep And Vibration Bution: Press this button and the receiver will beep and vibrate at the same time.

4. vibration Button: Press the vibration button and the receiver will vibrate.

5. Beep Button: Press the beep button and the receiver will beep . The beep function is not adjustable.

6. The +/- Button: Reduce and increase the vibration, beep & vibration level

7. Charging Port Of Remote Transmitter.

8. Power Button Of Receiver

9. Indicator Light Of Receiver

OPERATION AND CHARGING

How to choose USB charger
Please choose the USB charger with the parameters below (we can charge the device by the charger of smart phone or laptop/computer USB interface, before that please check if the charger is with the following parameters)
Input: 100-240V ~ 50-60Hz
Output: 5V 1000mA (or 300mA/500mA)
Charge the remote transmitter

1. Connect the charger cable to the charging port.
2. Plug the charger into a standard socket.
3.  The battery icon will flash during charging and be solid when charging is completed.

Charge the receiver

1. Remove the rubber cover, connect the receiver to a charger into a standard socket.
2. The red indicator light willflash slowly when the receiver is charging After fully charged, the red indicator light keeps on.

Turn the receiver on and off

1. Turn On: Press the power bution once, the receiver will make a short “beep” sound, means that the receiver is turned on..
2. Turn Off: Press the power button once, the receiver will make a long *beep’ sound and the indicator light is not fiash any more.

Check the receiver power
When the receiver is turned on, press the power button twice quickly to check the power:
Receiver beeps 5 times, representing 1007 (80-100%)
Receiver beeps 4 times, representing 80% (60-80%)
Receiver beeps 3 times, representing 60% (40-60%)
Receiver beeps 2 times, representing 40% (20-40%)
Receiver beeps 1time, representing 20% (1-207%)
HOW TO WEAR RECEIVER COLLAR CORRECTLY Correct wearing position helps healthy and effective dog training.

1. The receiver shall be placed on the bottom of the dog’s neck.
2. The space between collar and the dog’s neck should be maintained to a finger distance, which can’t be too loose.
3. The extra part of the strap can be trimmed, or be handled with other methods.

PAIRING AND TESTING

How to pair the remote transmitter and receiver

1. Tum on the remote transmitter, press the (€8) button to choose a signal channel you want to use.

2. Hold power button on the receiver for 2 seconds, when the indicator light keeps flashing, press one of the function button like beep, vibration or beepgvibration on remote transmitter to pair.

3.  If you do not press the function button within 10 seconds, please pair them again.

4. If you have multiple receivers, you can choose the same signal channel or choose another channel for pairing.
   Test the dog training collar

5. Beep & vibration function test
   Press the beep and vibration function button of the remote, the receiver will beep and vibrate at the same time.

6. Vibration function test
   Press the vibration function button, the receiver will vibrate.

7. Beep function test
   Press the beep button, the receiver will make a beep sound.
   1. You need to pair remote transmitter and receiver before using it on dog.
   Please follow the manual for the frst time use.
   2. Please keep in mind the dog channel you choose and do not change to other one, or the receiver will not receive signals.
   3. When the remote transmitter is tuned of, all the functions are locked.

REFERENCE SIZE FOR DIFFERENT DOG
Reference weight for dogs
Large Dog (Body height above 24 inch, Weight above 88 Ibs) Medium Dog (Height 16-24 inch, Weight 24.2-66 Ibs) Small Dog (Height 10-16 inch, Weight 8.8-22 Ibs) Mini Dog (Height under 10 inch, Weight under 8.8 Ibs)

Size (Dog)| Neck (In)| Chest Measurement (In)| Back Length
(In)| Type
---|---|---|---|---
Mini| 7.8-8.6| 9.8-11.8| 18.| Chihuahua.
Yorkshire Terrier
Small| 7.8-9.5| 11.4-14.2| 9| Chihuahua.
Yorkshire Terrier,
Poodle, Pomeranian
Medium| 9.0-11.0| 13.7-16.5| 11| Maltese Dog.
Shih Tzu
Large| 9.6-12.2| 16.2-18.5| 12.| Miniature Schnauzer,Pekingese
Large| 11.8-13.4| 18.1-20.8| 14.| Schnauzer,
English Cocker Spaniel
Large| 13.0-14.5| 20.5-23.2| 16.| Beagle
Huge| 17.0-18.9| 30.0-33.0| 24.| Husky

FAQ

Q: How old my dog can use dog training collar?

A: DO NOT use on puppies younger than 6 months.

Q: Canluse dog training collar for more than one dog?

A: Yes, you can simply add one or two receivers to the system to control two or three dogs, because three dog channels are available with one remote transmitter.

Q: How do | know when to charge the batteries of the dog training collar?

A: For Remote Transmitter: The battery level icon will be displayed on the left down side of LCD screen. For Receiver: Press the power button twice quickly to check the battery level, if only one beep is emitted, charge itin time.

Q:How long can | leave receiver on my dog?

A:The receiver is not designed to be worn constantly. We recommend to wear the collar on your dog less than 18 hours per day.

Q: How long should | process my training session for my dog?

A: Training sessions should be kept positive and short, itis better for about 10-15 minutes each time.

Q:Whatare the proper levels of vibration for my dog?

A: Try to find the best suitable levels of vibration for your dog starting from the lowest level. Excessive levels of stimulation will cause strong response from your dog.

Q: Whatis the effective distance of your dog training collar?

A: Without obstacles, the effective distance could be as far as 1000 meters between remote transmitter and receiver collar. However in reality, a st of factors, including telecom signal station, magnetic field, obstacle, battery volume, other wireless devices nearby, land form, vegetative cover, etc, will influence transmission of signals from remote. transmitter and the actual effective distance of the remote transmitter.

Q: Once my dog s trained and has obeyed to my commands, is it still necessary for my dog to continue wearing the receiver?

A: Yes, you may need to reinforce your dog’s memory with the receiver from time to time..

Q: Any other better training methods?

A: You can prepare some dog food for training incentive to achieve better training outcomes. Each time after you restrain your dog's misbehavior, you can tell your dog whatis supposed to do and whatis not. And after a few times of repetitions, your dog will understand what you like and what you don'tlike.

Q: The dog training collar does not work, or my dog does not respond after correctinstallation of the dog training collar, how should I solve this problem?

A: 1. Make sure the battery of remote transmitter and receiver collar have enough power to operate. 2. Check to see ifreceiver collar is tumed on. 3. Check signal channel button on remote transmitter to ensure signal channels are correctly configured. 4. Try to pair the remote transmitter and receiver again. 5. Take off receiver collar and test all of the three functions work properly. 6. Make sure receiver collar is properly worn and the receiver collar is not loose.

WARRANTY
This product is covered with warranty for 12 months from the date of its original purchase.
Any defective part il be repaired or replaced at no charge if the appliance has ot been tampered with and has been used according to these printed directions.
If any problems occur, please contact the local dealer immediately to launch a warranty claim. Our consumer service representative will respond within 1 business day, advise you how to correct the problem yourself or instruct you on how to return the defective nit back to us for repair or replacement.

service20220613@gmail.com Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>