ComXim 2BB29-RLMAX RLMAX Electric Turntable Instructions
- June 13, 2024
- ComXim
Table of Contents
ComXim 2BB29-RLMAX RLMAX Electric Turntable
Product Information
The ComXim intelligent turntable is designed for product rotation display, 360-degree shooting, and 3D scanning. It is available in various models with different specifications to suit different needs. The turntables support three rotation modes: continuous, intermittent, and left-and-right swing. They come with remote controls for controlling rotation modes, speeds, and angles.
Product Parameters
| Item No. | Voltage | Speed (S/Lap) | Max Load (Kg) |
|---|---|---|---|
| MT200RL20x | 20-68 | 20 | 20 Kg |
| MT320RL40x | 25-72 | 40 | 40 Kg |
| MT350RL40x | 28-74 | 40 | 40 Kg |
| MT400RL40x | 27-76 | 40 | 40 Kg |
| MT500RL200x | 34-90 | 200 | 200 Kg |
| NT600RL200x | 34-90 | 200 | 200 Kg |
| MT800RL300x | 55-140 | 300 | 300 Kg |
MT Series Turntable Model Naming Rules and Characteristics
The model code of the MT series turntable consists of the series name, turntable model, and diameter. The sub-code indicates the maximum load capacity. The “R” stands for remote control, and “L20” or “L40” indicates the maximum load in kilograms.
Product Usage Instructions
Small Remote Controller Instructions
- Speed Up: Clockwise rotation speed increase.
- Speed Down: Clockwise rotation speed decrease.
- Save: Save the current settings.
- Counterclockwise Rotation Start/Pause: Start or pause counterclockwise rotation.
- Note: The remote controller is powered by an ACR2025 button battery.
Medium Remote Controller Instructions
- Save: Store the current settings to the turntable flash memory.
- Lock: The other keys are invalid except for this button.
- Focus: Control the turntable to output the focus signal.
- Single Rotation: Pressing the buttons in this group rotates the turntable by a specific angle. The rotation angle options range from 0.1 degrees to 11.25 degrees, with corresponding buttons for each angle.
- Return to the Origin: Control the turntable to return to the original position.
- Counter Clockwise Rotation: Control the turntable to rotate counterclockwise.
- Slow Down: Control the turntable speed decrease.
- Intermittent Rotation: Control the turntable to rotate intermittently.
- Auto: Control the turntable to output the focus signal and the shutter signal.
- Shutter: Control the turntable to output the shutter signal.
- Note: The remote controller is powered by AAA batteries.
Large Remote Controller Instructions
- Lock: Except for this key, other keys are invalid.
- Save: Save current settings.
- Hot Keys: Press any key in this group, and the turntable rotates the corresponding angle once.
- Original Position: Turntable rotates back to the original position.
- Note: The remote controller is powered by AAA batteries.
Precautions
Note that detailed precautions are not provided in the given text-extract. Please refer to the complete user manual for important precautions and safety instructions.
- Plug in power supply and turn on the turntable.
- Use the remote control to control the rotation modes, rotation speeds and rotation angles.)
- This Series of electric turntables support 3 rotation modes: continuous, intermittent and left-and-right swing.
Product parameters
Item No. /Voltage /Speed（S/Lap） /Max Load（Kg）
- MT200RL20x/ 100V – 240vAC/ 20-68(S/Lap)/ 20 Kg
- MT320RL40x/ 100V – 240vAC/ 25-72(S/Lap)/ 40 Kg
- MT350RL40x/ 100V – 240vAC/ 28-74(S/Lap)/ 40 Kg
- MT400RL40x/ 100V – 240vAC/ 27-76(S/Lap)/ 40 Kg
- NT400RL40x/ 100V – 240vAC/ 25-72(S/Lap)/ 40 Kg
- MT500RL200x/ 100V – 240vAC/ 34-90(S/Lap)/ 200 Kg
- NT600RL200x/ 100V – 240vAC/ 34-90 (S/Lap)/ 200 Kg
- MT800RL300x/ 100V – 240vAC/ 55-140(S/Lap)/ 300 Kg
MT Series turntable model maming rules, identification and main characteristics
Remote Instructions
Small remote controller instructions
Note: ACR2025 button battery is used to provide power for the remote controller.
Medium remote controller instructions
Note: AAA battery is used to provide power for the remote controller.
Large remote controller instructions
Note: AAA battery is used to provide power for the remote controller.
Precautions
- Attention: Electric turntables are of electric products. They are Not waterproof and not heat resistant.
- In cases when turntable doesn’t work, please check whether the turntable is powered on, whether the power cord is plugged in tightly, and whether the switch is turned on. If the turntable still cannot work normally, please contact us.
- The load-bearing capacity of the turntable refers to the maximum load that the turntable can bear when the item is smaller than the diameter of the turntable. If the item exceeds the diameter of the turntable, the load-bearing capacity will be greatly reduced, and even it will not turn.
- In order to prolong the service life of the turntable, it is recommended to stop for 2 hours after working continuously for 8 hours.
- In order to protect the safety of users, unauthorized modification or repair of the product is prohibited. Please contact us if necessary.
Notes
FCC STATEMENT
15.19 Labelling requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to user
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device: This equipment complies with FCC radiation exposurelimits set forth for an uncontrolled environment. Thisequipment should be installed and operated withminimum distance 20cm between the radiator & your body.
Copyright reserved by Shenzhen ComXim Technologies Co.,Ltd.2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>