PaiPaitek PD 520V Shock Dog Training Collar with Remote User Guide

PaiPaitek PD 520V Shock Dog Training Collar with Remote User Guide

service20220613@gmail.com

PD 520V

PACKAGE CONTENTS

PD 520V-1 (For 1 dog)

• 1 x Remote Transmitter
• 1 x Receiver
• 1 x Collar Strap
• 1 x Lanyard
• 1 x USB Charging Cable
• 1 x User Manual

PD 520V-2 (For 2 dogs)

• 1 x Remote Transmitter
• 2 x Receiver
• 2 x Collar Strap
• 1 x Lanyard
• 1 x USB Charging Cable
• 1 x User Manual

SPECIFICATIONS

HOW THIS DOG TRAINING COLLAR WORKS

When the dog has bad behavior, the owner controls the collar with a remote to emit harmless buzzing and vibration signals to remind the dog.
After a period of training, the dog eventually learns to associate bad behavior with the warning from the collar, and achieved the purpose that the owner wanted to train the dog.

HOW TO TRAIN DOGS EFFECTIVELY

For example, when your dog barks or bites the sofa, you can communicate with him via the remote transmitter, so that he can respond to your call immediately.

1. Wear this collar receiver for your dog.
2. Set the remote transmitter to the lowest stimulation level.
3. When he barks or bites the sofa. You make a “NO” gesture and press the sound button at the same time.
4. If he does not stop this behavior, you press the vibration button again.
5. If he looks at you confusedly at this time, you need to raise the remote transmitter to tell him “Yes, please stop this bad behavior”.
6. When he stops bad behavior, please praise him and reward him. Repeat this for 3 or 4 times.

Tips

1. If your dog has no obvious improvement after using it, we recommend that you use it for a few more days, usually after 7-10 days of wearing and training, the dog will have obvious changes.
2. Dog training collars are used to correct bad behavior of dogs, not for punishment. Obviously, the collar is a safe and effective training tool. Build communication and strengthen your bond with your dog. Obey all safety messages that follow this instruction to avoid possible injury.

BEFORE USING THE DOG COLLAR

1. Do not expose to extreme heat or store at the temperatures above 113℉ or 45℃.
2. Please always keep the dog training collar out of reach of children.

HOW TO WEAR COLLAR STRAP

1. The receiver shall be placed on bottom of the dog’s neck.
2. The space between collar and the dog’s neck should be maintained to a finger distance, which can’t be too loose.
3. If the collar strap is too long, please cut off the excessive portion. Use a lighter to melt the burr edge.
4. The collar can be worn often, but we recommend taking it off for several hours a day to let the dog feel relaxed and free.

INTRODUCTION OF THE BUTTONS

1. Signal Channel Button: Press this button, choose channel 1 or 2 as the signal channel of dog training before connecting the signals between remote transmitter and receiver.
   Note:
   PD 520V-1: For 1 dog only, 1 receiver, you can choose any channel as your dog training signal, otherwise you have to connect the signals again when training your dog;
   PD 520V-2: For 2 dogs, 2 receivers, you can choose the same signal channel for the 2 receivers, or you can choose 2 signal channels. please remember the signal channel of each receiver;

2. Sound Button: Press this button and the receiver will emit beep signal.

3. Vibration Button: Press this button and the receiver will emit vibration signal.

4. Sound and Vibration Button: Press this button and the receiver will emit sound and vibration signal.

5. Indicator Light of Remote: The blue indicator light will light up when the remote transmitter is working or charging.

6. +/- Button: Adjust the vibration level between 1-10; the sound function is not adjustable.

7. Charging Port of Remote Transmitter

8. Indicator Light of Receiver: The red indicator light will light up when the receiver is working or charging.

9. Power Button of Receiver: Press this button to turn the receiver on and off.
   1. Turn on (Press this button, the receiver will emit a short “beep” sound, and the Indicator light will light up.)
   2. Turn off (Press this button, the receiver will emit a long “beep’ sound.)

10. Charging Port of Receiver.

CHARGING AND CHECKING BATTERY LEVEL

How to Choose USB Charger
Please choose the USB charger with the parameters below (we can charge the device by the charger of smart phone or laptop/ computer USB interface, before that please check if the charger is with the following parameters):
Input: 100-240v 50-60HZ
Output: 5V 1000mA (or 300mA/500mA)

Charge the Remote Transmitter

1. Connect the charger cable to the charging port.
2. Plug the charger into a standard socket.
3. The blue indicator light of remote transmitter keeps on when charging.
4. Once the remote transmitter is fully charged, the blue indicator light turns off automatically.

Charge the Receiver

1. Open the rubber cover, connect the receiver to a charger into a standard socket.
2. The red indicator light of receiver keeps on when charging.
3. Once the receiver is fully charged, the red indicator light turns off automatically.

Check the Receiver Battery Level
When the receiver is turned on, press the power button twice quickly to check the battery level:
Receiver beeps 5 times, representing
Receiver beeps 4 times, representing
Receiver beeps 3 times, representing
Receiver beeps 2 times, representing
Receiver beep 1 time, representing

Tips

1. Charge the remote transmitter and receiver at least 2 hours when receive the item. the collar cannot be used while being charged.
2. The battery is rechargeable. In order to maintain battery life, please charge it every 2 months if it is not often used.
3. The receiver will turn off automatically after 10 seconds “beep” sound when battery is low.
4. The charging rubber cover must be closely covered when your dog swimming or the receiver will get broken when getting into water from the interface. Taking off the receiver is recommended.

How TO PAIR THE REMOTE AND RECEIVER

1. Open the remote transmitter, press the button to choose a signal channel you want to use.
2. Turn on the receiver, then hold power button on the receiver for 2 seconds, when the red indicator light keeps flashing, press one of the function button like sound, vibration or sound & vibration on remote to pair.
3. If you do not press the function button of the remote within 10 seconds, please pair them again.
4. If you have multiple receivers, you can choose the same signal channel or choose another channel for pairing.

Tips

1. You need to pair remote transmitter and receiver before using it on dog. Please follow the manual for the first time use.
2. Please keep in mind the dog channel you choose and do not change to other one, or the receiver will not receive signals.

TEST THE DOG TRAINING COLLAR

1. Sound Function Test
   Press the sound button of the remote, the receiver will make a beep sound.

2. Vibration Function Test
   Press the vibration button of the remote, the receiver will vibrate.

3. Sound and Vibration Function Test
   Press the sound and vibration button of the remote, the receiver will beep and vibrate.

REFERENCE SIZE FOR DIFFERENT DOGS

Large Dog (Body height above 24 inch, Weight above 88 lbs)
Medium Dog (Height 16-24 inch, Weight 24.2-66 lbs)
Small Dog (Height 10-16 inch, Weight 8.8-22 lbs)
Mini Dog (Height under 10 inch, Weight under 8.8 lbs)

FAQ

Q: The remote transmitter is normal, the receiver is no longer working. How

to troubleshoot?

A: 1. Check to see if receiver is turned on.
2. Make sure both remote transmitter and receiver have enough power battery to operate.
3. Try to pair the remote transmitter and receiver again.

Q: Dogs don't respond to functional instructions?

A: 1. Take off receiver and test all of the three functions work properly.
2. Make sure that the receiver is under the dog’s neck and cannot be worn loose.
3. Please trim the excessively long dog hair.
4. Try different features to stimulate the dog.
5. Gradually increase the level of vibration, the highest level of 10.

Q: The receiver collar has stopped working, it won't turn on or charge. How

to troubleshoot?

A: 1. Check the receiver appearance for damage.
2. Check that the charging plug meets the requirements.
3. Connect the receiver to the charger and observe whether the charging status is normal.
4. After the receiver is fully charged, restart and pair.

Q: How do I find the proper levels of vibration for my dog?

A: Try to find the best suitable levels of vibration for your dog starting from the lowest level and observe how the dog responds. Excessive levels of stimulation shall cause strong response from your dog.

Q: How do I know when to charge the dog training collar?

A: For Remote Transmitter: The battery level icon will be displayed on the left down side of LCD screen. For Receiver: press the power button twice quickly to check the battery level, if only one beep is emitted, charge it in time.

Q: Can I use dog training collar with more than one dog?

A: Yes, this dog training collar can use one remote transmitter to control up to two receivers. You only need to pair both receivers with the remote transmitter.

Q: What is the effective distance of your dog training collar?

A: Without obstacles, the effective distance could be as far as 500 meters between remote transmitter and receiver collar. However in reality, a list of factors, including signal station, magnetic field, obstacle, battery volume, other wireless devices nearby, landform, vegetative cover, etc, shall influence transmission of signals from remote transmitter and the actual effective distance of remote transmitter.

Q: Any other better training methods?

A: You can prepare some dog food for training incentive to achieve better training out comes. Each time after you restrain your dog’s misbehavior, you can tell your dog what is supposed to do and what is not. And after a few times of repetitions, your dog will understand what you like and what you don’t like.

Q: How long can I leave receiver collar on my dog?

A: The collar can be worn daily. Please reposition the collar on the dog’s neck every 2 hours.

Q: How long should I process my training session for my dog?

A: Training sessions should be kept positive and short, it is better for about 10-15 minutes long each time.

Q: Once my dog is trained and has obeyed to my commands, is it still

necessary for my dog to continue wearing the receiver collar?

A: Yes, you may need to reinforce your dog’s memory with the receiver collar from time to time.

Q: How old my dog can use dog training collar?

A: DO NOT use on puppies younger than 6 months.

Q: What should I do if my dog's neck becomes red and irritated?

A: Discontinue to use the dog training collar for a few days. If the condition persists beyond 48 hours, please ask your veterinarian to check. Continue to monitor your dog’s skin condition closely even if the skin becomes normal.

STATEMENT

Thank you for purchasing the remote dog training collar PD 520V, this product has been tested to meet your stringent quality standards, and also covered with warranty for 12 months from the date of purchase.

If you have any questions, please contact us via the order ID, and we will respond within 24 hours.

This warranty is invalid if the defect is caused by accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, or a failure to follow operating instructions provided with the product including adding essential oils directly into the tank and base.

This warranty does not apply to normal wear and tear or commercial use. In no event shall liability exceed the purchase price paid by the purchaser of the product. Under no circumstances shall there be liability for any loss- direct, indirect or incidental-or consequential damage arising out of, or in connection with the use of the product.

service20220613@gmail.com

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>