Paipaitek PD 519 3300FT Dog Training Collar with Remote User Guide

PD519
DOG TRAINING COLLAR
User Guide

STATEMENT

Thank you for purchasing the remote dog training collar PD 519, this product has been tested to meet your stringent quality standards, and also covered with warranty for 12 months from the date of its original purchase Please contact us with your order ID and problem or issue, we will respond within 24 hours.
This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, ora failure to follow operating instructions provided with the product including adding essential oils directly into the tank and base.
This warranty does not apply to normal wear and tear or commercial use. In no event shallliability exceed the purchase price paid by the purchaser of the product. under no circumstances shall there be liability for any lossdirect, indirect or incidental-or consequential damage arising out of, or in connection with the use of the product.

SAFETY INSTRUCTION

Training collars are used to train the dogs and not for punishment. Use properly with care and the collar can be a safe and effective tool to train.
Building communication and strengthen your bond with your best friend Obey all safety messages that follow this instruction to avoid possible injury.
If your dog has heart disease, high blood pressure, cerebral thrombosis, skin allergies, etc., please do not use it

REINFORCE LEARNING BEHAVIOURS

If your dog knows the command but responds inconsistently with your requirement, a training collar can sharpen his skil For example, you have taught your dog to come when calling, but over time the responds slower. You can communicate with him via the remote transmitter, so that he responds to your call immediately.

1. Set the colar o nitial stimulation level and test t
2. Fitthe collar on your dog’s neck along with his regular collar.
3. Let him roam around the training area. Then give the command and press the stimulation button simultaneously
4. If your dog moves toward you, stop stimulation and praise him.
5. If he stops before he reaches you or turns away. repeat the command and continue the stimulation. Again, stop at the instant he runs to you and rewards him by praising him or feeding him a treat. Repeat this for 3 or 4 times.

Tips

1. If he doesn’t get it for the first few times, don’t give up and do not increase the stimulation. Try to work on this a few times.
2. During the training period never give the command if you are not able to enforce it. Your dog has to make the mental connection between the static shock/vibration/tone to his behavior (may take a week or more for some dogs).

Altogether, both methods of stopping unwanted behavior and reinforcing learing behaviors can be applied to nearly every training scenario.

BEFORE USING THE DOG TRAINING COLLAR

1. Do not expose to extreme heat or store at the temperatures above 13°F or 45°C.
2. Please always keep the dog training collar out of reach of children.
3. Charge the remote transmitter and receiver at least 2 hours when receive them. The collar can’t receive any signals while itis being charged.

WHEN USING THE DOG TRAINING COLLAR

1. Avoid leaving the collar on the dog for more than 18 hours per day.
2. If possible, please reposition the collar on the dog’s neck every 1to 2 hours.
3. Check the fitto prevent excessive pressure.
4. The charging rubber cap must be closely covered when your dog is ‘swimming o the receiver will get broken when getting into water from the. interface. Taking off the receiver is recommended
5. The receiver will tum off automatically after 10 seconds ‘beep” sound when battery is low.

PACKAGE CONTENTS

PD 519-1(For 1 dog)

1x Remote Transmitter
1x Collar Strap
1x USB Charging Cable
1x Lanyard
2 x Long Conductive Silicone Caps
2 x Short Conductive Silicone Caps| 1 x Receiver
2x Short Contact Points
2xLong Contact Points
1x TestLamp
1x User Manual
---|---

PD 519-2 (For 2 dogs)

1xRemote Transmitter
2xCollar Straps
1x Lanyard
1% USB Charging Cable
4 xLong Conductive Silicone Caps
4 xShort Conductive Silicone Caps| 2xReceivers
4 xLong Contact Points
4 x Short Contact Points
1x TestLamp
1x User Manual
---|---

PD 519-3 (For 3 dogs)

1x Remote Transmitter
3 x Receivers
3x Collar Straps
6 x Long Contact Points
6 x Short Contact Points| 1x Lanyard
1x USB Charging Cable
1x Test Lamp
6 x Long Conductive Silicone Caps
1x User Manual
6 x Short Conductive Silicone Caps
---|---

MAINTENANCE

1. Please examine regularly to ensure tightness of the receiver and eliminate any extemnal damages.
2. Clean the screw caps with alcohol weekly.
3. Examine your dog’’s neck and clean up weekly.
4. The battery is rechargeable. In order to maintain battery life, please charge it every 2 months if it is not often used.

SPECIFICATIONS

Receiver: 52g
Channels| 3 Channels
Remote Range| 1000m /1100yds/3300ft
Battery Capacity| Remote Transmitter: 300mAh
Receiver: 650mAh
Working Time| Remote Transmitter: 180 days
Receiver: 25-40 days
Waterproof Level| Remote Transmitter:IPX3
Receiver: IPX7

INTRODUCTION FOR THE BUTTONS

1.  The +/- Button: Increase or decrease the vibration and static shock levelor change the 9 tone types.

2. Static Shock Button: Press the static shock button and the receiver will emit a mild static shock.

3. Power Button/Keylock of Remote: Press to turn the remote transmitter onand off.

4. Signal Channel Button: Press this button, choose channel 1, 2 or 3 as. the signal channel of dog training before connecting the signals between remote transmitter and receiver.
   Note: PD 519-1: For 1 dog only, 1 receiver, you can choose any channel as the signal channel for training your dog, please remember the signal channel you choose, otherwise you have to connect the signal again when training your dog;
   PD 519-2: For 2 dogs, 2 receivers, you can choose the same signal channel for the 2 receivers, or you can choose 2 different signal channels, please remember the signal channel of each receiver;
   PD 519-3: For 3 dogs, 3 receivers, you can choose the same signal channel for the 3 receivers, or you can choose 3 different signal channels, please remember the signal channel of each receiver;

5. Tone Button: Press the tone button and the receiver will emita tone, with 9 tone types to choose from.

6. Vibration Button: Press the vibration button and the receiver will vibrate.

7. Charging Port Of The Remote Transmitter

8. Contact Points: Choose a suitable length to fit for different thickness of dog’s hair.

9. Power Button Of The Receiver

10. Indicator Light Of The Receiver

OPERATION AND CHARGING

How to choose USB charger
Please choose the USB charger with the parameters below (we can charge the device by the charger of smart phone or laptop/computer USB interface, before that please check if the charger is with the following parameters):
Input: 100-240V ~ 50-60Hz
Output: 5V 1000mA (or 300mA/S00mA)

Charge the remote transmitter

1. Connect the charger cable to the charging port.
2. Plug the charger into a standard socket.
3. The battery icon willflash during charging and be solid when charging is completed.

Charge the receiver

1. Remove the rubber cover, connect the receiver to a charger into a standard socket.
2. The red indicator will flash slowly when the receiver is charging, and the green indicator will stay on after it is fully charged.

Turn the receiver on and off

1. Tum On: Press the power button once, the receiver will make a short “beep’ sound, means that the receiver is tumed on.
2. Tumn Off: Press the power button once, the receiver will make a long “beep” sound and the indicator light is not flash any more.

Check the receiver power
When the receiver is tured on, press the power button twice quickly to check the power:
Receiver beeps 5 times, representing 1007% (80-100%)
Receiver beeps 4 times, representing 80% (60-80%)
Receiver beeps 3 times, representing 60% (40-60%)
Receiver beeps 2 times, representing 40% (20-40%)
Receiver beeps 1time, representing 20% (1-20%)

HOW TO WEAR RECEIVER COLLAR CORRECTLY

Correct wearing position helps healthy and effective dog training.

1. The receiver shall be placed at the bottom of dog’s neck, and the screw caps must contact the dog’s skin directly
2. If your dog has thick hair, please use longer screw caps.
3. The space between receiver collar and the dog’s neck shall be maintained to a finger distance, which can’t be too loose, otherwise static shock effectiveness shall be badly influenced.
4. The extra part of the strap can be trimmed, or be handled with other methods.

PAIRING AND TESTING

How to pair the remote transmitter and receiver

1. Turn on the remote transmitter, press the (CH) button to choose a signal channel you want to use.
2. Hold power button on the receiver for 2 seconds, when the indicator light keeps flashing, press one of the function button like tone, vibration or static shock on remote transmitter to pair.
3. If you do not press the function button within 10 seconds, please pair them again
4. If you have multiple receivers, you can choose the same signal channel or choose different channel for pairing

Test the dog training collar

1. Static shock function test
   Static shock function can not be seen with the naked eye, please use our testlamp. Press the static shock function button, the test lamp will blink.

2. Vibration function test
   Press the vibration function button, the receiver will vibrate.

3. Tone function test
   Press the tone button, the receiver will emit a tone.
   1. You need to pair the remote transmitter and receiver before using it on the dog. Please follow the manual for the first time use.
   2. Please remember the channel you choose and do not change to other one, or the receiver will not receive signals.
   3. When the remote transmitter is turned off, all the functions are locked except LED light function.

REFERENCE SIZE FOR DIFFERENT DOGS

Reference weight for dogs
Large Dog (Body height above 24 inch, Weight above 88 Ibs)
Medium Dog (Height 16-24 inch, Weight 24.2-66 Ibs)
Small Dog (Height 10-16 inch, Weight 8.8-22 Ibs)
Mini Dog (Height under 10 inch, Weight under 8.8 Ibs)

Size (Dog)| Neck(In)| Chest Measurement (In)| Back Length (In)| Type
---|---|---|---|---
Mini| 7.8-8.6| 9.8-11.8| 18.| Chihuahua, Yorkshire Terrier
Small| 7.8-9.5| 11.4-14.2| 9| Chihuahua, Yorkshire Terrier, Poodle, Pomeranian
Medium| 9.0-11.0| 13.7-16.5| 11| Maltese Dog, Shih Tzu
Large| 9.6-12.2| 16.2-18.5| 12.| Miniature Schnauzer, Pekingese
Large| 11.8-13.4| 18.1-20.8| 14.| Schnauzer, English Cocker Spaniel
Large| 13.0-14.5| 20.5-23.2| 16.| Beagle
Huge| 17.0-18.9| 30.0-33.0| 24.| Husky

FAQ

Q: How old my dog can use dog training collar?

A: DO NOT use on puppies younger than 6 months.

Q: Can | use dog training collar for more than one dog?

A: Yes,you can simply add one or two receiver collars to the system to control two or three dogs, because three dog channels are available with one remote transmitter.

Q: What should | do if my dog's neck becomes red and rritated?

A: Stop using the dog training collar for a few days. If the condition persists beyond 48 hours, please ask your veterinarian to check Continue to monitor your dog’s skin condition closely even if the skin becomes normal.

Q: Canl attach aleash to the receiver ?

A: NO. This will resultin pulling the screw caps (contact points) too tightly against your dog's neck. Use a separate collar placed above the receiver.

Q: How do | know when to charge the batteries of the dog training collar?

A: For Remote Transmitter: The battery level icon will be displayed on the LCD screen. For Receiver: press the power button twice quickly to check the battery level, if only one beep is emitted, charge itin time.

Q:How long can I leave receiver on my dog?

A:The receiver collar is not designed to be worn constantly. We recommend to wear the collar on your dog less than 18 hours per day.

Q: How long should I process my training session for my dog?

A: Training sessions should be kept positive and short, itis better for about 10-15 minutes each time

Q: Whatare the proper levels of static shock for my dog?

A: Try to find the best suitable levels of static shock for your dog starting from the lowest level. Excessive levels of stimulation will cause strong response from your dog.

Q: Whatis the effective distance of your dog training collar?

A: Without obstacles, the effective distance could be as far as 1000 meters between remote transmitter and receiver collar. However in reality, a list of factors, including telecom signal station, magnetic field, obstacle, battery volume, other wireless devices nearby, land form, vegetative cover, etc, will influence transmission of signals from remote transmitter and the actual effective distance of the remote transmitter.

Q: Once my dog s trained and has obeyed to my commands, is it still necessary for my dog to continue wearing the receiver ?

A: Yes, you may need to reinforce your dog's memory with the receiver from time to time..

Q: Any other better training methods?

A: You can prepare some dog food for training incentive to achieve better raining outcomes. Each time after you restrain your dog’s misbehavior, you can tell your dog what is supposed to do and what is not. And after a few times of repetitions, your dog will understand what you like and what you don't like.

Q:lwantto test static shock function of receiver myself, butit does notwork, is anything wrong?

A: If youtest receiver collar by your hand or leg, please touch the 2 screw caps (contact points) at the same time, touching only one screw cap (contact points) will not work.

Q: The dog training collar does not work, or my dog does not respond after correct installation of the dog training collar, how should I solve this problem?

1. Make sure the battery of remote transmilter and receiver collar have enough power to operate. 2. Check to see if receiver collar is turned on. 3. Check signal channel button on remote transmitter to ensure signal channels are correctly configured. 4. Try to pair the remote transmitter and receiver again. 5. Take off receiver collar and test all of the three functions work properly. 6. Make sure receiver collar is properly worn and the receiver collar is not loose. 7. Trim your dog's hair where the screw caps (contact points)can touch the neck.

WARRANTY

This product is covered with warranty for 12 months from the date of its original purchase.
Any defective part will be repaired or replaced at no charge if the appliance has not been tampered with and has been used according to these printed directions.
If any problems occur, please contact the local dealer immediately to launch a warranty claim. Our consumer service representative will respond within 1 business day, advise you how to correct the problem yourself or instruct you on how to return the defective unit back to us for repair or replacement

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>