Panasonic TH-50LX800K 50 Inch 4K UHD Smart Android TV Instruction Manual

TH-50LX800K 50 Inch 4K UHD Smart Android TV

Operating Instructions LED TV

50-inch model

55-inch model

65-inch model

75-inch model

Model No.
TH-50LX800K TH-55LX800K TH-65LX800K TH-75LX800K

English
Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference.
The images shown in this manual are for illustrative purposes only. Some illustrations are presented as conceptual images and may be different from the actual products. Illustrations shown may be different between models and countries. The illustrations for 50-inch model is used in this manual unless otherwise mentioned.
Transport only in upright position

Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright 1992­2022 Dolby Laboratories. All rights reserved.

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
WARNINGTo reduce the risk of fire or electric shock.
– This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
– Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
– The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
i) The instructions for installation or use provided with non-floor standing televisions likely to be used in
the home and weighing over 7 kg shall contain the following information or equivalent:
Never place a television set in an unstable location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be avoided by taking simple
precautions such as: ­ Using cabinets or stands recommended by the
manufacturer of the television set. ­ Only using furniture that can safely support the
television set. ­ Ensuring the television set is not overhanging the
edge of the supporting furniture. ­ Not placing the television set on tall furniture (for
example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. ­ Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture. ­ Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied.

Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral devices.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
1. The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.
2. The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
3. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instruction.
Notes for battery disposal The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste. For more information, please contact the local authority or your retailer where you purchased the product. All trademarks are the property of their respective owners and all rights are acknowledged.
Contents
Safety Precautions ···································· 3
Setting Up the TV ·······································4
Connecting the TV ···································· 6
Initial Setup ················································ 8
Operating the TV······································· 10
Watching External Inputs ························ 13
Using Homepage-Apps ·························· 13
Using the Menu Functions ····················· 14
Using Media Player ································· 17
Additional Information ···························· 18
Troubleshooting ····································· 19
Maintenance············································ 20
Specifications·········································· 21

2

Safety Precautions
To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings and cautions below:
µMains plug and lead
Warning
If you detect anything unusual, immediately remove the mains plug. Mains plug types vary
between countries.
This TV is designed to operate on AC 100 – 240 V, 50/60 Hz.
Insert the mains plug fully into the socket outlet. Ensure that the mains plug is easily accessible. Disconnect the mains plug when cleaning the TV. Do not touch the mains plug with wet hands.
Do not damage the mains lead. · Do not place a heavy object on the lead.
· Do not place the lead near a high temperature object.
· Do not pull on the lead. Hold onto the mains plug body when disconnecting the plug.
· Do not move the TV with the lead plugged into a socket outlet.
· Do not twist the lead, bend it excessively or stretch it. · Do not use a damaged mains plug or socket outlet. · Ensure the TV does not crush the mains lead. Do not use any mains lead other than that provided with this TV.
µTake care
Warning Do not remove covers and never modify
the TV yourself as live parts are accessible when they are removed. There are no user serviceable parts inside. Do not expose the TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV. Do not insert foreign objects into the TV through the air vents. Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wallhanging brackets. Do not apply strong force or impact to the display panel. Do not place the TV on sloped or unstable surfaces, and ensure that the TV does not hang over the edge of the base.

This TV is designed for table-top use. Do not expose the TV to direct
sunlight and other sources of
heat.

To prevent the spread of fire, keep candles or other open flames away from this product at all times

µDangerous part / Small object

Warning
This product contains possibly dangerous parts such as plastic bags, that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children.
µPedestal
Warning
Do not disassemble or modify the pedestal.
Caution
Do not use any pedestal other than the one provided with this TV.
Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately.
During setup, make sure that all screws are securely tightened.
Ensure that the TV does not suffer any impact during installation of the pedestal.
Ensure that children do not climb onto the pedestal. Install or remove the TV from the pedestal with at least
two people. Install or remove the TV by the specified procedure.
µVentilation

Caution Allow sufficient space around the TV in order to help prevent excessive heat, which could lead to early failure of some electronic components.
Minimum distance (cm)

10

10

10

10

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains.
Whether you are using a pedestal or not, always ensure the vents at the bottom of the TV are not blocked and there is sufficient space to enable adequate ventilation.
3

Safety Precautions

Safety Precautions | Setting Up the TV

µBuilt-in wireless LAN
Caution
Do not use the built-in wireless LAN to connect to any wireless network (SSID) for which you do not have usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access.
SSID is a name for identifying a particular wireless network for transmission.
Do not subject the built-in wireless LAN to high temperatures, direct sunlight or moisture.
Data transmitted and received over radio waves may be intercepted and monitored.
The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency bands. To avoid malfunctions or slow response caused by radio wave interference when using the built-in wireless LAN, keep the TV away from other devices that use 2.4 GHz and 5 GHz signals such as other wireless LAN devices, microwave ovens, and mobile phones.
When problems occur due to static electricity, etc., the TV might stop operating to protect itself. In this case, turn the TV off at the Mains power On / Off switch, then turn it back on.
µBluetooth® wireless technology
Caution
The TV use the 2.4 GHz radio frequency ISM band (Bluetooth®). To avoid malfunctions or slow response caused by radio wave interference, keep the TV away from the devices such as other wireless LAN devices, other Bluetooth devices, microwaves, mobile phones and the devices that use 2.4 GHz signal.
µMoving the TV
Caution Before moving the TV, disconnect all cables.
Move the TV with at least two people. Support as shown to avoid injury by the TV tipping or falling.

µBattery for the Remote Control
Caution Incorrect installation may cause battery leakage,
corrosion and explosion. Replace only with the same or equivalent type. Do not mix old and new batteries. Do not mix different battery types (such as alkaline and
manganese batteries). Do not use rechargeable batteries (Ni-Cd, etc.). Do not burn or break up batteries. Do not expose batteries to excessive heat such as
sunshine, fire or the like. Make sure you dispose of batteries correctly.
Setting Up the TV
Supplied accessories Accessories may not be placed all together. Take care not to throw them away unintentionally. Operating Instructions Remote Control · RC700P
Batteries (AAA) × 2 (p.5)
Mains Lead (p.8)
Mini Jack Adapter
Adapter AV

µWhen not in use for a long time
Caution
This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet. Remove the mains plug from the wall socket when the
TV is not in use for a prolonged period of time.
µUse conditions
Caution This appliance is intended for use in tropical climates.

Pedestal
50-inch model Assembly screws
(M5 x 20) × 4

Base

55-inch model

Assembly screws

(M5 x 20) × 4

Base

4

Setting Up the TV

65-inch model

Assembly screws

(M5 x 27) × 4

Base

75-inch model

Assembly screws

(M6 x 33) × 4

Base

Note Illustrations shown may be different between models and countries.
Preparation

Attaching the pedestal
1 Assemble the pedestal

Inserting remote’s batteries
push down the cover

Note the correct polarity (+ or -)

Wall mounting the TV (optional)

Please contact your local Panasonic dealer to purchase the

recommended wall-hanging bracket.

Rear of the TV

(View from the side)

a b

Depth of screw

Screw for fixing the TV onto the wall-hanging bracket (not supplied)

Holes for wall-hanging bracket installation

Model 50-inch 55-inch

a 200 mm 400 mm

b 200 mm 300 mm

65-inch

400 mm

300 mm

75-inch

400 mm

300 mm

Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Lay the TV on a foam mat or thick soft cloth on a table.
2 Remove the assembly screws from the TV.

Model
50-inch 55-inch 65-inch 75-inch

Type
M6 M6 M6 M6

Depth of screw Minimum Maximum 12 mm 15 mm 12 mm 15 mm 12 mm 15 mm 12 mm 15 mm

5

Connecting the TV

Warning
When optional accessories such as wall brackets etc. are used, always read and follow the manufacturer installation and usage instructions.
Do not mount the unit directly below ceiling lights (such as spotlights or halogen lights) which typically give off high heat. Doing so may warp or damage plastic cabinet parts.
When installing wall brackets you must ensure the wall bracket is not electrically grounded to metal wall studs. Always ensure that there are no electrical cables, pipes etc. in the wall before you begin the wall bracket installation.
To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.
Connecting the TV
Please ensure the TV is disconnected from the mains socket/ power point before attaching or disconnecting any RF/ AV leads.
External equipment and cables are for illustrative purposes only and not supplied with this TV.
Check the type of terminals and cable plugs are correct when connecting.
When using an HDMI cable, use the fully wired one. Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor. Otherwise, distortion of image/ sound may occur or operation of other equipment may be interfered. Also read the manual of the equipment being connected.
Terminals

Connections
Aerial
Aerial
RF cable
Keep RF (aerial) cable away from the mains lead to avoid and minimise mains interference pickup.
Do not place the RF cable under the TV. An aerial, correct cable (75 coaxial) and correct
terminating plug are required to obtain optimum quality picture and sound. If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial socket and the TV. Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your particular area and the accessories required. Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the customer. If the aerial is placed in the wrong location, interference might happen.

1 Rear of the TV
2
3

9 (eARC)

4

5

1 USB 2.0

6

2 USB 3.0

3 ETHERNET

7

4 ANTENNA

5 DIGITAL AUDIO OUT

8

6 HDMI 1(eARC)

9

7 HDMI 2

10

8 HDMI 3

9 HEADPHONE

10 AV IN

6

Connecting the TV

Blu-Ray Player TV

HDMI 1/2/3

HDMI cable

Set top box

TV
HDMI 1/2/3

HDMI cable

Satellite dish Set top box

Blu-Ray Player

AV / Game equipment

µUsing HDMI terminal
TV

HDMI 1/2/3

HDMI cable

Equipment

µUsing AV terminals
TV
AV in

Equipment

MiNi AV Cable

DVD Recorder / VCR TV

HDMI 1/2/3

HDMI cable

Speaker system TV

DIGITAL AUDIO OUT

Optical cable

Amplifier with speaker system

To enjoy the sound from the external equipment in multi-channel sound (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For the connections, read the manuals of the equipment and amplifier.

Amplifier TV
HDMI 1 (eARC)

HDMI cable
Amplifier with speaker system

Equipment

DVD Recorder / VCR

Use HDMI1 to connect the TV to an amplifier which has eARC/ARC(Audio Return Channel) function. If connecting to an amplifier without eARC/ARC function, use DIGITAL AUDIO OUT.

7

Initial Setup
When you first turn on the TV, a series of steps will popup to guide you to setup your TV. These steps are not necessary if the setup has been
completed by your local dealer.
1 Plug the mains plug into the socket
outlet and turn on the TV.
It may take a few seconds before the screen is displayed.

Note: If you don’t want to use your Android device to setup the TV,you will skip to Step 3.If you want to use your Android device to setup the TV, please turn on the Bluetooth functions of your Android phone, then find and open “Google” application on your phone. Follow the instruction tips to set device. Step 3: Select whether or not to connect your TV set to the Wi-Fi network.
WIFI

AC 100 – 240 V, 50/60 Hz

Google – Initial Setup
When you turn on the TV for the first time,there will show a wizard to guide you to finish the following initial settings: Step 1: Select the menu language as you need. Note: English(United States) is recommended. llustrations within this publication are provided for reference only.

Note: If you have connected the TV to the WI-FI network, it will check for updates like Google service updates and so on. Then please select whether or not to sign in to your Google account.
Step 4: Sign in to get new apps, recommendations, movies, the Assistant,and more from Google.

English(United States)

Initial Setup

Step 2: (Only for some countries) Select whether or not to use and Android device to setup the TV.

Step 5: Read to accept the Google terms of service and privacy policy.

Terms of Service
By continuing, you agree to the Google Terms of Service, the Google Privacy Policy, and the Google Play Terms of Service.
This device may also receive and install updates and apps from Google, your device’s manufacturer, or your operator. Some of these apps may offer optional in-app purchases. You can remove them or adjust their permissions at any time from the device settings.
Google also collects and temporarily stores the voice and audio history from microphone use to improve the product experience.

Accept Terms of Service Privacy Policy Play Terms of Service

Tap PANASONIC TV(486)on the list

8

Initial Setup

Initial Setting
Initial setup involves selecting all the settings required to be able to search for and store all the analogue channels you can receive. Make sure that the television is switched on and follow

Step 1:

Environment
HPloemasee choose your Environment: Shop

12345 Home Shop

wizard opens, which guides you through the initial setup process.
Step 1: Environment Press / to select your environment.Then press OK to enter next step. Home Mode: You Would be able to view the standard settings for Picture and sound modes. Shop Mode: You can enjoy enhanced setting for Picture and Sound modes.
Note: Picture mode setting will not be accessible when you select Shop Mode.

Step 2: Step 3:

Step 2: Where are you? Press / to select your Country/Region.Press OK to confirm and move to next step.

Next
Where are you?
We will provide you with the local time,climate and more information.
Country/Region
Terms & Conditions
Please read the terms & conditions and agree. Terms and Conditions Terms and Conditions The contents and services collectively the “Licensed Application”
made available to you through this TV set (this “Device”) are licensed, not sold, to you for use only under these terms and conditions. The providers of the Lisensed Application (each an “Application Provider”) reserve all rights not expressly granted to you. 1.Scope of License The license granted to you for a Licensed Application by the relevant Application Provider is limited to a non-transferable license to use the Licensed Application on the Device that you own or

KYRGYZSTAN LAO PDR LEBANON MALAYSIA MALDIVES
Next

Step 3: Terms & Conditions
Use / to read Terms & Conditions, then pressOK to confirm and move to next step.

Step 4:

Step 4: Channel installation
Use / to select Tunner mode: Antenna, Cable and etc; Type:Digital, Analogue and All,then pressOK to confirm and move to next step.

Step 5: Please check settings

Step 5:

When all setup is done, the [Please check settings] interface

displays on the screen, and press OK to finish the initial setup.

You can also go back to former step and make any changes

by using button.

Channel installation

Tuner mode ANTENNA

Type Digital

Scan

Skip

Please check settings
Please verify settings in system settings

Country/Region Environment

MALAYSIA Home

Start now

9

Operating the TV

Operating the TV

Using the remote control

Remote Control Functions

Most of your television’s functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings.

POWER PICTURE OFF TIMER
INPUT

(On/Off button) Turns the TV on or off To enter the picture mode. To enter the sleep timer. To enter source selection interface Goes to the NETFLIX homepage Goes to the YouTube homepage Goes to the prime video homepage

Goes to the AUDIO LINK homepage Goes to the Google Play homepage To select the apps

Colour buttons Performs multiple operations which correspond to the operation guide displayed on the menu screen

MENU To open the settings menu Goes to the smart TV homepage

Press to display the electronic programme guide

EXIT
OK
BACK

Display to the information
To exit the program Confirms your selection.
(up, down, left and right direction buttons) Highlights different items in the menu system and adjusts the menu controls. Exit the menu and return to the previous menu

OPTION Displays the options menu of selected functions FAV To enter the channel list

(Mic) (Available only when the network connection is normal.)

To open the apps,move the apps or remove from favorites

To fast backward

To play

To fast forward To end the running program

To pause

+ –
MUTE
TEXT STTL

Start recording Increases or decreases the volume To mute and un-mute the sound To show the text To show the subtitles

10

Operating the TV

0~9 MEDIA PLAYER
AD

Channel up / down
Select the digital key number To enter the media player Audio description

How to Pair Remote Control with the TV
This is a Bluetooth remote control, and before using it, please pair it with the TV firstly.The following steps are for your reference: Step 1: Press button to enter the home page. Step 2: Press button to enter the “RC pairing”. Step 3: Follow the “Settings tips page”
Press OK and together. Step 4: The screen will display “Pairing…”, Pair finished the screen will display “Success!”. NOTE:If you wait more than 2 minutes and it can’t pair, please repeat the above steps for pairing again. If you want to unpair the Bluetooth remote, As follow: Step 1: Press button to enter the home page. Step 2: Press / / to choose ,and then press OK to enter. Step 3: Press to select “Remotes & Accessories” and then to chooe the Bluetooth remote name to enter next steps. Step 4: Press unpair and then choose OK button.
When remote control does not respond 1. Press and hold the button as shown below for 3 seconds to reset
remote control.
2. Aim remote control reception and unpair by following below. Home > Setting

Remotes & accessories > RCU03 > Unpair

11

Operating the TV

Using the TV controls
50/55/65/75-inch model

Indicators on the TV

54

3

2

1

1 Power On / Power Off
The TV is off, short press the button to turn on the power.
The TV is on, short press the button, the virtual button will display as shown below.

When the virtual button appears, press the button briefly to switch the button key functions.
When the virtual button is present, press the button long enough (for more than 1 second), can perform the following functions.
Power off To turn Off the apparatus completely, you must pull the mains plug out of the mains socket.
Input source Long press display input source option, and then long press to release the button switch input mode.

2 Voice On / Voice Off Turn it left to set it On, the indicator light will lighting and then go off, follow the steps below to set the Voice: Home > Settings >Device Preferences > Google Assistant > On
Follow the steps that appear on the screen, you can say “Ok Google” to use voice function, and the indicator will lighting when the TV receives the voice, then directly say your request.
Turn it right to set it Off to exit voice function, indicator light will go to yellow.
Note Make sure the TV is connected to the Internet before
using Voice. Please set it to On before using Voice. Please log in to your GOOGLE account before
using Voice.
3 Power LED White: Standby
4 Remote control signal receiver
5 Voice signal receiver Yellow: Off

Volume increase Volume reduction Previous channel Next channel

12

Watching External Inputs | Using Homepage – Apps

Watching External Inputs
1 Connect the external equipment. (p. 6 – 7) 2 Display the [Input] menu, then select the input of the connected equipment.

ATV CABLE ANTENNA AV HDMI 1 HDMI 2 HDMI 3 Android TV Home

Press OK key access.
Select
OK Note If the external equipment has an aspect adjustment function, set it to “16:9”.

Using Homepage – Apps

Note: This manual is for common use. Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. And for some models, certain options are not available.

You can select all the features from homepage.

Press Press

to display homepage. / to select icons from the screen list.

Press OK to enter each option.

To exit the APP, press or .

Customize channels: Add and remove channels from your Home screen.

13

Using the Menu Functions
Using Quick Access Menu

HDMI PC/ AV Mode:Video/PC/Auto
Overscan:To select ON or OFF Noise Reduction:To select Off,Low,Middle,High and Auto. Picture Reset:To reset the picture. Motion Estimate and Motion Compensation(MEMC): To select Off,Low,Middle and High. Gamma:Select 2.2 or 2.4.

Using the Menu Functions

Note: Some of the functions might be unavailable in certain sources. And for some models, certain options are not available.
This section explores the menus and settings of your TV. Each menu is outlined and detailed to help you get the most from your TV. To access the menu system:

1. In TV mode, press menu on the remote control to
   display the quick access list. 2. Press / to select the desired item, then press
   OK to open the corresponding submenu. 3. In submenu, use / and OK buttons to make
   the adjustments, or use / to select an item, use OK to enter and operate according to the on-screen display or guide. 4. Press to return to the previous menu.
   MENU
   Picture:Enter to adjust picture mode or advanced settings. Sound: Select this option to set the sound adjustments. Channel:Select this option to adjust the channel.
   System:Select this option to adjust the settings.

Sound

Picture Sound Channel System

Sound Mode Surround Mode

Standard

Dolby Atmos

Night Mode

Sound Only

Output Device

TV Speaker

Digital Output

PCM

Advanced Settings

Sound Mode: To select the mode of Standard,Speech, Music,Stadium and User.
Surround Mode: Select Off,Pure Sound and Surround Dolby Atmos:Select ON or OFF.
Night Mode: Select ON or OFF.
Sound Only: Select it and the TV screen will turn off in 10 seconds.
Output Device: To select the TV Speaker, SPDIF/Optical and HDMI-ARC.
Digital Output : Select the PCM,ByPass and Auto.

Picture Sound Channel System

Advanced Settings: 1.DAC-4 Dialogue Enhancer 2.DAC-4 Dialogue Enhancer Level 3.Balance 4.Digital Audio Delay (ms)
5.Digital Audio Volume 6.eARC 7.Sound Reset

Picture

Channel

Picture Sound Channel System

Picture Mode

Normal

Backlight

100

ECO Setting

High

Aspect Ratio

16:9

Advanced Settings

Picture Mode: To select the mode of Normal,Dynamic, Filmmaker, Sport,Game and Custom.
Backlight: Select the level of 0-100. ECO Setting: To select the Off,Low and High.
Aspect Ratio: Displays the [Aspect Ratio] screen. Follow the operation guide to select the mode. [16:9] / [4:3]/ Auto / Original. Advanced Setting: Color Temperature:To select the Normal,Cool,Warm. Dynamic Contrast:To select ON or OFF.
14

Picture Sound Channel System

Channel Scan Digital Channel Setup EPG Favorite Channel Diagnostic Channel Organizer

Note: This function is only available in TV mode.
Channel Scan: Allows you to scan for all available analog
and digital channels.
Digital Channel Setup:
To select the option to adjust the Subtitle Setup, Teletext Setup, Audio Setup, LCN, Auto Service Update, Update Scan(Auto Scan).

EPG: Press OK/ to enter the Program Guide menu.
Favorite:
Setup favorite channel list.
Channel Diagnostic: Press OK/ to display some signal information
on current digital channel, such as signal strength, Frequency, etc.
Channel Organizer:
This option allows you to organize channels.

ATV CABLE ANTENNA AV HDMI 1 HDMI 2 HDMI 3 Android TV Home

System

Picture Sound Channel System

HDMI CEC Settings HDMI Signal Format Sleep Timer Idle TV Standby TV Placement Environment Shop Mode Settings Software Update

Off Off Desktop Home

HDMI CEC Settings: CEC control: To select on or off. Device Auto Power Off: To select on or off. TV Auto Power On: To select on or off. CEC Device List: Turn devices on and select [Enable] to enable control of HDMI devices. HDMI Signal Format:To select HDMI 1.4/HDMI 2.0. Sleep Timer:To select 15min,30min,45min,60min,90min, 120min or off. Idle TV Standby:To select After 1 hour of inactivity,After 2 hour of inactivity,After 4 hour of inactivity,After 24 hour of inactivity or off. TV Placement:To select Desktop and Wallmount. Environment:To select Home and Shop. Shop Mode:To select E-Sticker.
Settings: 1.Lock: Click and lock the TV. 2.Power: Turn the Wake On Network and Network Standby on or off. 3.Recording Storage: Put the storage device and record the storage files. 4.OSS License: The content about oss license. Software update: To select off,once and Always
(This function is only for OAD)
The input

Channels setup (ATV, CABLE and Antenna )
Analogue setup:Select ATV and enter. – Analogue Auto Tuning: Press OK to start the automatic search process. The search may take a few minutes. – Analogue Manual Tuning: Press OK to enter the interface. Press/ to set program, Audio system or color system item, then Press/ select frequency and press OK to search channel. – Teletext Setup: Press OK and then use / to select preferred teletext.
Digital Cable Tuning:Select Cable and enter. Auto tuning: Press OK to start the automatic search process. The search may take a few minutes. During the process, you can press Back and choose YES to exit . Manual Tune: Select the channel number and start to scan LCN: Select on or off. Auto service Update: Select on or off.
Digital Antenna Tuning:Select Antenna and enter. Auto Scan: Press OK to start the automatic search process. The search may take a few minutes. During the process, you can press Back and choose YES to exit . Manual Scan: Select the channel number and start to scan
Press MENU button, then select Channel and press OK to enter Digital Channel setup, press OK to select Subtitle Setup. Subbtitle Setup: (1)Subtitle Setting:Include off,Basic,Hearing impaired.
(2)Primary Preferred Language:Press OK and then use / to select Primary Preferred Language. (3)Secondary Preferred Language:Press OK and then use / to select Sencond Preferred Language.

Press then press / to select your desired source, and then press OK to confirm.

Using the Menu Functions

15

Press MENU button, then select Channel and press OK to enter Digital Channel setup, press OK to select Teletext Setup. Teletext Setup: Press OK and then use / to select preferred teletext or Decoding Page Language. Press MENU button, then select Channel and press OK to enter Digital Channel setup, press OK to select Audio Setup. Audio Setup: (1)Audio Description:Include Off and On. (2)Audio Description Mixing Level:Press OK and then use / to set Audio Description Mixing Level. (3)Audio Type: You can set the audio type. (4)Primary Preferred Language:Press OK and then use / to select Primary Preferred Language. (5)Secondary Preferred Language:Press OK and then use / to select Sencond Preferred Language. LCN: Select on or off. Auto service Update: Select on or off. Update Scan(Auto Scan):Include Off and On.
16

Using the Menu Functions

Using Media Player
Media Player allows you to enjoy photo, music or video recorded on a USB Flash Memory.
The picture may not appear correctly on this TV depending on the digital cameras used. Display may take some time when there are many files and folders in the USB Flash Memory. Partly degraded files might be displayed at a reduced resolution. The folder and file names may be different depending on the digital camera used.

Document Video Photo Music Disk

Inserting / Removing the USB Flash Memory

Document:
1. Select Document icon. 2. Press Up, Down, Left or Right direction button to select your desired file and press OK to Play. 3. Use OK key to see more option: ZOOM+, ZOOM-.
4. Press Return key of remote to Stop playing.

TV

Insert or remove straight and completely.

5V 500mA
MAX
5V 900mA
MAX

Starting Media Player

1 Insert the USB Flash Memory.

Video: 1. Select Video icon, then press OK button to view movie file. 2. Press Up, Down, Left or Right direction button to select your desired file and press OK to Play. 3. While playing a Video, press OK Menu of remote to display the play console. For the Play console, Press Ok key of remote to Play and Pause the video file.Left key of remote to Fast backward.Right key of remote to Fast forward. 4. Use OPTION key to see more option: Photo scale, Looping mode, Subtitle, Subtitle code, Audio track, information and video list.
5. Press Return key of remote to Stop playing and Press Return to Exit. Photo:

2 Select the mode.

1. Select Picture icon, then press OK button to view the picture.

2. Press Up, Down, Left or Right direction button to select

your desired picture file and press OK to show.

Select

3. While showing picture, press OK to display the play console.

Access

For Previous and Next use remote left and Right key.

4. Use OK key to see more option: Left rotation, Right rotation,

[DOCUMENT]: Displays the thumbnail of all documents ZOOM+, ZOOM-, Manual play/Auto play, Information, Play

in the USB Flash Memory.

mode, Play interval,BGM:on or off.

[PHOTO]:Displays the thumbnail of all photos in the

USB Flash Memory.
[MUSIC]:Displays the thumbnail of music folders in the USB Flash Memory.
[VIDEO]: Displays the thumbnail of video titles in the USB Flash Memory.

Music:
1. Select Music icon, then press OK button to listen to Music. 2. Press Up, Down, Left or Right direction button to select your desired file and press OK to Play. 3. The Play console includes Previous, Play/Pause,Fast

[DISK]: Displays the thumbnail of all document in

backward/Fast forward,Next.

the USB Flash Memory.

Press OPTION key to see PlayList .

[Contents Display]

4. Press Return key of remote to Stop playing.

Follow the operation guide to perform available operations.
When the cursor stays on the icon,it displays the information of the highlighted content.

Disk:
1. Select Disk icon, then press OK button to choose folder. 2. Press Up, Down, Left or Right direction button to select your desired file and press OK to Play. 3. Press Return key of remote to Stop playing.

Using Media Player

17

Additional Information
Auto power standby function
The TV will automatically go into Standby mode in the following conditions: No signal is received for 15 minutes. [Sleep timer ] is active in the [System] menu (p. 15).
Input signal that can be displayed

Note
Data modified with a PC may not be displayed. Do not remove the device while the TV is accessing
data. Otherwise this can damage the device or TV. Do not touch the pins on the device. Insert the device in the correct direction. Otherwise this
can damage device or TV. Electrical interference, static electricity, or erroneous
operation may damage the data or device. Panasonic
is not liable for any deterioration or damage of data or
device during operations with the TV. It is recommended to connect the USB Flash Memory
directly to the TV’s USB port. Some USB devices or USB HUB may not be used with
this TV. You cannot connect any devices by using the USB port. Additional information for USB devices may be on the
following website. (English only)
http://panasonic.jp/support/global/cs/tv/

Signal name 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1,125 (1,080) / 60i, 50i 1,125 (1,080) / 60p, 50p, 24p 2,250 (2,160) / 60p, 50p, 24p

HDMI

Mark : Applicable input signal Signals other than above may not be displayed
properly. The above signals are reformatted for optimal viewing
on your display.
HDMI connection
This TV incorporates HDMITM technology. HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high- definition digital images and high-quality sound by connecting the TV and the equipment.
µApplicable HDMI features
Input audio signal: 2ch Linear PCM (sampling frequencies – 48 kHz, 44.1 kHz, 32 kHz)
Input video signal: “Input signal that can be displayed” (p. 18)
Match the output setting of the digital equipment.

Supported file format in Media Player
µImage Decoder
JPEG; PNG; BMP; GIF
µVideo Decoder
MPEG1/2/4; H.264; H.265; AVI; WMV; VP8 ; M-JPEG
µAudio Decoder
PCM; LPCM; MPEG1/2/4; AAC; WMA; AC3; EAC3; FLAC
µSubtitles
­ The video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions.
­ If there are more than one subtitles text file inside the same folder, they are displayed in the following order of priority: “.srt”, “.sub”.
Note Even if these conditions are fulfilled, some files may
not play depending on how they are encoded. Do not use two-byte characters or other special codes
for data. Connected devices may become unusable with this TV
if the file or folder names are changed.

USB Flash Memory
For playing back in Media Player Format: FAT32 Compliance:
USB2.0 port: Supports only USB1.1 or USB2.0 standard. USB3.0 port: Supports only USB1.1 or USB2.0 or USB3.0 standard. Maximum USB capacity supported is 1TB.

Additional Information

18

Troubleshooting
Before requesting service or assistance, please follow these simple guides to resolve the problem. If an error message appears, follow the message’s instructions. If the problem still persists, please contact your local Panasonic dealer for assistance.
Screen
Red, blue, green or black spots on the screen.
This is the characteristic of liquid crystal panels. The liquid crystal panel is built with very high precision technology. Occasionally, a few non-active pixels may appear on the screen as points of red, green, blue or black. This does not affect the performance of your TV and it is not a quality problem.
Chaotic image, noisy.
Set [Noise reduction] in the [Picture] menu to remove noise (p. 14).
Check nearby electrical products (car, motorcycle, fluorescent lamp).
No image is displayed.
Check the settings of [Contrast] or [Brightness] in the [Picture] menu (p. 14).
Check the TV is in AV mode. If the TV is in AV mode, check the selected input mode match the output of the external equipment (p. 13).
Unusual image is displayed.
Turn the TV off with Mains power On / Off switch (p. 12), then turn it on again.
Pictures from equipment connected via HDMI are unusual.
Check the HDMI cable is connected properly. Turn the TV and equipment off, then turn them on
again. Check an input signal from the equipment (p. 18). Use equipment compliant with EIA/CEA-861/861D.
Sound
No sound is produced.
Check the sound mute setting (p. 14) and volume.
Low level or distorted sound.
Sound signal reception may be deteriorated.
Sound output via HDMI connection is unusual.
Set the sound setting of the connected equipment to “2ch L.PCM”.

General
The TV goes into Standby mode.
This TV is equipped with auto power standby function (p. 18).
The remote control does not work or is intermittent.
Replace the batteries (p. 5). Point the remote control directly at the remote
control signal receiver of the TV (within about 7 m and 30 degree angle). Situate the TV away from sunshine or block sources of bright light from shining on the remote control signal receiver of the TV.
Parts of the TV become hot.
Even if the temperature of parts of the front, top and rear panels has risen, these temperature rises do not cause any problems in terms of performance or quality.
The TV panel moves slightly when it is pushed with a finger.
Clattered sound might be heard.
There is some flexibility around the panel to prevent damage. This is not a malfunction.
Overcurrent error message appears.
The connected USB device might cause this error. Remove the device and turn the TV off with Mains power On / Off switch, then turn it on again.
Check foreign objects are not inside the USB port.

Troubleshooting

19

Maintenance
First, remove the mains plug from the socket outlet.
Regular care Gently wipe the surface of the display panel, cabinet
and pedestal by using a soft cloth. Wipe the mains plug with a dry cloth at regular
intervals. Moisture and dust may lead to fire or electrical shock. For stubborn dirt First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Wring the cloth and wipe the surface. Finally, wipe away all the moisture.
Caution Do not use a hard cloth or rub the surface too hard as
this could scratch the surface. Do not subject the TV’s surfaces to water or detergent.
Liquid inside the TV could lead to product failure. Do not subject the surfaces to insect repellent, solvent,
thinner or other volatile substances. This may degrade surface quality or cause peeling of the paint. The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the surface with your fingernail or other hard objects. Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may degrade surface quality.
20

Maintenance

Specifications

Model no.

50-inch model TH-50LX800K
55-inch model TH-55LX800K
65-inch model TH-65LX800K
75-inch model TH-75LX800K

Power source AC 100 – 240 V, 50/60 Hz

Power consumption (Rated power / Standby power)

50-inch model 155 W / 0.5W
55-inch model 200 W / 0.5W

65-inch model 250 W / 0.5W
75-inch model 300 W / 0.5W

Display panel
Panel LCD panel (LED backlight)
Visible screen size (diagonal)
50-inch model: 126 cm 55-inch model: 139 cm 65-inch model: 164 cm 75-inch model: 189 cm

Display resolution 50-inch model: 3,840 (W) × 2160 (H) 55-inch model: 3,840 (W) × 2160 (H) 65-inch model: 3,840 (W) × 2160 (H) 75-inch model: 3,840 (W) × 2160 (H)

Dimensions (W × H × D)
50-inch model 1120 x 720 x 269mm (With Pedestal) 1120 x 658 x 83mm (TV only)
55-inch model 1234 x 787 x 269 mm (With Pedestal) 1234 x 725 x 83 mm (TV only)

65-inch model 1453 mm x 912 mm x 318 mm (With Pedestal) 1453 mm x 846 mm x 83 mm (TV only)
75-inch model 1673 mm x 1036 mm x 365 mm (With Pedestal) 1673 mm x 970 mm x 83 mm (TV only)
Mass 50-inch model 10.8 kg (With Pedestal) 10.4 kg (TV only) 55-inch model 14.7 kg (With Pedestal) 14.4 kg (TV only) 65-inch model 19.7 kg (With Pedestal) 19.1 kg (TV only) 75-inch model 29.8 kg (With Pedestal) 28.7 kg (TV only)
Connection terminals AV in Mini, 1.0 V[p-p] (75 )
EARPHONE Mini, 150mV rms~ 250mV rms
HDMI 1 / 2 / 3 input TYPE A Connectors
USB USB 2.0/3.0 TYPE A Connectors USB2.0 DC 5VMax.500 mA USB3.0 DC 5VMax.900 mA
Speaker Output
50/55/65/75-inch model Audio output
20 W (10 W + 10 W)
21

Specifications

Receiving systems / Band name

9 Systems
Systems 1 PAL B, G 2 PAL I 3 PAL D, K 4 SECAM B, G 5 SECAM D, K
6 PAL
7 PAL 60 Hz/5.5 MHz 8 PAL 60 Hz/6.0 MHz 9 PAL 60 Hz/6.5 MHz

Function
Reception of broadcast
Playback from Special VCR’s or DVD Playback from Special Disc Players and Special VCR’s or DVD

Receiving channels (Analogue TV)
VHF BAND 2-12 (PAL/SECAM B, K1) 0-12 (PAL B AUST.) 1-9 (PAL B N.Z.) 1-12 (PAL/SECAM D)
UHF BAND 21-69 (PAL G, H, I/SECAM G, K, K1) 28-69 (PAL B AUST.) 13-57 (PAL D, K)

Aerial input VHF / UHF
Operating conditions Temperature 0 °C – 45 °C Humidity 20 % – 80 % RH (non- condensing) Note
Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
Built-in wireless LAN
Standard compliance and Frequency range IEEE 802.11 a/b/g/n/ac 2.4~2.5GHz and 5.15~5.825GHz
Security Support for WPA/WPA2
Built-in Bluetooth
Bluetooth V5.0 2.4~2.485GHz
,

Specifications

22

Oss License
This product incorporates the following software: (1) The software developed independently by or for Panasonic Entertainment & Communication Co., Ltd., (2) The software owned by third party and licensed to Panasonic Entertainment & Communication Co., Ltd., (3) The software licensed under the GNU General Public License, Version 2.0 (GPL V2.0), (4) The software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or (5) Open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) – (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof }system > settings > Oss License~
At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright notice thereof. Contact Information: osd-cd-request@gg.jp.panasonic.com

Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

Customer’s Record The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number

Panasonic Entertainment & Communication Co., Ltd. Web Site: http://www.panasonic.com
© Panasonic Entertainment & Communication Co., Ltd. 2022

English 72-LX800K-X51Z1
Printed in China

References

• TV | Digital AV | Support | Panasonic Global
• Panasonic North America | Create Today, Enrich Tomorrow

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>