GERMAN POOL FRY-233 Smart Stir Fryer Instruction Manual

GERMAN POOL FRY-233 Smart Stir Fryer

Warning

Important – Read Before Use
For safety purposes, you should read the instructions carefully before using the appliance for the first time. Save the instructions for future reference. The appliance is designed for domestic use and may only be installed and operated in accordance with these instructions.

1. Do not clean or submerge the unit in water.

2. Do not operate the unit in humid conditions or near gas pipes or naked flame.

3. Check if the stirrer spins normally before use.

4. Keep away from the air filter when the unit is in operation to avoid injuries.

5. The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or individuals lacking in experience or knowledge, unless they are supervised and instructed by
   persons responsible for their safety.

6. Children should be supervised to ensure that they do not play with the appliance.

7. The surface of the heating elements may produce certain odours when used for the first time. This phenomenon is normal.

8. If oil is splashed onto the heating elements, a hint of burned oil residue may emerge when cooking the next dish. This phenomenon is normal.

9. Oil splashed directly onto the upper heating element shroud may result in discoloration of shroud or heating element.

10. Keep the bottom of the inner pot dry and free of water, to prevent water flowing onto the heating plate and causing risk of short circuit.

11. Do not touch bare metal or glass parts of the machine when it is in operation or risk of burns may result.

12. Do not wipe the inner pot with hard or sharp objects, to avoid damage to the inner pot coating.

13. The machine will automatically calibrate the position of the stirrer so the pot can be closed after power has been connected. Do not try and force the lid closed.

14. It is not recommended to frequently cook congee, soups, and other foods high in liquid content in the Smart Stir Fryer. Large amounts of steam may result in large amounts of starch or detritus, and may affect the operating lifespan of the halogen tube as well as making the apparatus difficult to clean.

15. Do not cook too much food at once. When filling the inner pot with ingrdeients, the total mass of the ingredients should not pass 3/4 the height of the inner pot. When cooking, the cooking oil can be reduced by about half. If you open the lid during cooking, a lid angle of greater than 45 degrees is necessary, in order to ensure on/off of magnetic switch.

Product Structure

Caution:

• Lift the inner pot out of the housing and remove all packaging separating the inner and outer pot before use, including the silicone paddle protector. When transporting the unit, you may protect the stirrer with the enclosed silicone paddle protector.
• The stirrer will automatically adjust position. If power is not connected, forcibly moving the stirring mechanism may have undesirable results. Please do not force the stirrer into motion.
• Do not attempt to clean heating element shroud before it has cooled to room temperature and power cord is removed. Doing so may result in risk of electrical hazard.

Control Panel

Operating Instructions

Warning:

• Do NOT use the Smart Stir Fryer to make soup. Excessive amounts of water and steam may damage the appliance.
• It is NORMAL for the unit to go through a warm-up process of approximately 150 seconds when heating up from cold or room temperatures. The timer will NOT start counting down until the temperature for the preset programme has been reached. This is normal. If the unit is already preheated, then the timer will start countdown upon pressing the “Start” button.

1. Place the Smart Stir Fryer on a flat and stable surface, ensuring the unit is stable and free of wobble.
2. Connect the power cable. All unit lights will flash on for one second, and then it will automatically calibrate. When the power cable is properly connected, the power indicator light will light up.
3. Secure the stirrer and inner pot
   • Using the lid handle, lift the lid and remove the inner pot. Make sure the outside of the inner pot is dry and free of moisture.（Fig.1）
   • Align the bottom of the inner pot with the unit axis, turn the stirrer clockwise, and remove the silicone paddle protector.（Fig.2）
   • Place the inner pot back into the unit and secure in place. Carefully replace the cover.（Fig.3）
   • The Smart Stir Fryer will automatically calibrate the stirrer to check that it is correctly installed; the stirring mechanism will turn for 5 seconds.

Note:

• Tap the edge of the inner pot with both hands to check it is flush with the heating plate. If the inner pot is not fitted properly, check if there is dirt stuck on the surface of the inner pot or the heating plate. Dirt and detritus between the inner pot and the heating plate may negatively affect heat transmission.
• When securing the inner pot, place the handle in proper position to ensure the lid of the unit can be securely closed.

Cook

• Place cut-up ingredients into the inner pot in order according to recipe instructions.
• Lock the inner pot in place. The display will show four zeroes if this process is done correctly (“00:00”).
• Select one of the preset programmes according to recipe (stir-fry, pan-fry, sauté, toast, simmer) and press the respective button. The indicator light will light up, and the time needed to complete the programme cycle will be displayed on the display panel.
• You can manually adjust the cooking time as necessary by pressing the “+” or “-“ buttons. Each press will increase or decrease cooking time by 30-seconds. Adjustment of cooking time is possible while the unit is in operation.
• Press “Start” button. The indicator will light up for as long as the cooking programme is active. After a warm-up process, the displayed time will begin counting down.
• When programme is finished, “END” will show on the display. The unit will beep for 3 seconds to signal the end of cooking time.
• During operation it is possible to press“Power” button to stop unit whenever desired.
• It is NORMAL for the unit to go through a warm-up process of approximately 150 seconds when heating up from cold or room temperatures. The timer will NOT start counting down until the temperature for the preset programme has been reached.

Function Button|

Cooking Time

| Action Cycle| Function Description
---|---|---|---
Halogen| Stirrer
On| Off| Spin| Stop
Stir-Fry| 3(min)| 15(Sec)| 15(Sec)| 15(Sec)| 15(Sec)| Inner Pot and Halogen Heating Element operate in unison.
Pan-Fry| 2(min)| 15(Sec)| 15(Sec)| Stirrer needs to be removed| Inner Pot and Halogen Heating Element operate in unison. Stirrer needs to be removed.
Sauté| 3(min)| 3(min)| 0(Sec)| 3 (min)| 0(Sec)| Inner Pot and Halogen Heating Element operate in unison,with the halogen element maintaining heat. Stirrer is in constant motion.
Toast| 12(min)| 15(Sec)| 15 (Sec)| 15(Sec)| 15(Sec)| Inner Pot and Halogen Heating Element operate in unison.
Simmer| 24(min)| 15(Sec)| 15 (Sec)| 15(Sec)| 15(Sec)| Inner Pot and Halogen Heating Element operate in unison.

Tips: If you are cooking dishes that do not require frequent stirring, you may remove the stirrer by turning anticlockwise to the unlock position and pulling vertically upwards at any time before the lid is closed and programme is started.

Preset Time
Press “Start” button, select function/cooking programme, and then press “Preset”–the unit will display “-0:01”. Preset times can be manually increased by pressing “Preset” as needed. If preset time needs to be decreased, it is necessary to restart the unit and press “Preset” all over again. When adjustment is complete, select function/ cooking programme. When the time is up, the stir fryer will automatically start according to the chosen programme.

Care & Maintenance

1. To clean, remove power cord. Gently pull stirrer upwards to remove for cleaning. Wash the inner pot with clean water and dry with cloth after use. Do not get the outer body of the unit wet.
2. Wipe down the halogen heating element shroud on the lid with a soft cloth. To remove persistent oil stains, moisten the cloth with a small amount of white vinegar.
3. Keep the bottom of the inner pot dry and free of water, to prevent water flowing onto the heating plate and causing risk of short circuit.
4. Do not touch bare metal or glass parts of the machine when it is in operation or risk of burns may result.
5. Do not wipe the inner pot with hard or sharp objects, to avoid damage to the inner pot coating.
6. The machine will automatically calibrate the position of the stirrer so the pot can be closed after power has been connected. Do not try and force the lid closed.
7. It is not recommended to frequently cook congee, soups, and other foods high in liquid content in the Smart Stir Fryer. Large amounts of steam, may result in large amounts of starch or detritus, and may affect the operating lifespan of the halogen tube as well as making the apparatus difficult to clean.
8. Do not cook too much food at once. When filling the inner pot with ingredients, the total mass of the ingredients should not pass 3/4 the height of the inner pot. When cooking, the cooking oil can be reduced by about half. If you open the lid during cooking, a lid angle of greater than 45 degrees is necessary, in order to ensure on/off of magnetic switch.

Troubleshooting

If you encounter the following common troubles, please solve according to the following instructions. If the problem persists or a cause cannot be found, please contact our customer service centre.
Caution: For safety purposes, do not dismantle the product for repair by yourself.

power is properly connected. If there is a mechanical power failure, please bring the product to our Repair and Customer Service Centre.
Water pools beneath the unit.| The water tank is overflowing,empty and replace immediately.
Unit emits a burning smell during

operation.

| This may be due to dirt or detritus caught on the inside or outside of the inner pot. Clean thoroughly.
Food is overcooked or undercooked.| Refer to recipe instructions. Adjust cooking time as necessary; increase or decrease according to food volume.
Programme failure; sudden stop of unit, buttons become unresponsive during operation.| Unplug the unit and attempt restart. This may be caused by humid conditions or interference from nearby electrical appliances. Dry the unit thoroughly before reconnecting power. If the unit still cannot operate normally, please bring the product to our Repair and Customer Service Centre.

Long preheat time.

| May be caused by low voltage. If preheating takes over six minutes, please bring the product to our Repair and Customer Service Centre.
Water leakage or serious oil leakage in inner pot.| During operation, it is normal for a small amount of oil to escape the inner pot. If the leakage is serious and persists, please bring the product to our Repair and Customer Service Centre.
Lid cannot shut properly.| Position inner pot handle and stirrer properly; connect power to allow stirrer to calibrate and automatically position itself so the lid can be closed.

Technical Specifications

Specifications are subject to change without prior notice. Refer to www.germanpool.com for the most up-to-date version. If there is any inconsistency or ambiguity between the English and Chinese versions, the English version shall prevail.

Warranty Terms & Conditions

Under normal operations, the product will receive a 1-year full warranty provided by German Pool (effective starting from the date of purchase).

This warranty is not valid until Customer’s registration information is returned to and received by our Service Centre within 10 days of purchase via one of the following methods:

1. Visit our website and register online: www.germanpool.com/warranty.

2. Complete all fields on the attached Warranty Card and mail it back to our Customer Service Centre along with a photocopy of the purchase invoice (Warranty Card and invoice copy will not be returned to Customer).

3. Customer who fails to present original purchase invoice will be disqualified for free warranty.

4. Customer should always follow the operating instructions. This warranty does not apply to:

   • labour costs for installation, on-site check-up, replacement of parts and other transportation costs;
   • damages caused by accidents of any kind (including transport and others);
   • operating failures resulted from incorrect voltage, improper operations and unauthorized installations or repairs.

5. This warranty is invalid if:

   • purchase invoice is modified by unauthorized party;
   • product is used for any commercial or industrial applications;
   • product is repaired or modified by unauthorized personnel, or unauthorized parts are installed;
   • serial number is modified, damaged or removed from the product.

6. German Pool will, in its discretion, repair or replace any defective part.

7. This warranty will be void if there is any transfer of ownership from the original purchaser.

Customer Service & Repair Centre
German Pool (Hong Kong) Limited8/F,
China Travel (Cargo) Logistics Centre1 Cheong Tung RoadHung Hom,
Kowloon, Hong Kong
Tel : +852 2333 6249
Fax : +852 2356 9798
Email :repairs@germanpool.com

References

• 德國寶German Pool | 家庭電器、廚櫃、傢俬 | 香港十大名牌

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>