PaiPaitek PD 518 Dog Training Collar User Guide

PaiPaitek PD 518 Dog Training Collar

Product Information

Specifications

• Model: PD 518
• Available Versions: PD 518-1 (1 dog), PD 518-2 (2 dogs), PD 518-3 (3 dogs)
• Package Contents:
  • Remote Transmitter
  • Collar Straps
  • Lanyard
  • USB Charging Cable
  • Conductive Silicone Caps (Long and Short)
  • Contact Points (Long and Short)
  • Test Lamp
  • User Manual

Product Usage Instructions

Safety Instruction

Training collars are used to train dogs, not for punishment. Use properly and with care to build communication and strengthen the bond with your pet. Obey all safety messages to avoid possible injury. Do not use the collar on dogs with specific health conditions.

Reinforce Learning Behaviours

When training your dog, repeat commands and provide positive reinforcement when they obey. Reward good behavior with praise or treats to encourage learning.

Tips Before Using the Dog Training Collar

1. Avoid extreme heat and store below 113°F (45°C).
2. Keep the collar out of reach of children.
3. Charge the remote transmitter and receiver for at least 2 hours before initial use.

Tips When Using the Dog Training Collar

1. Avoid leaving the collar on the dog for more than 18 hours per day.
2. Reposition the collar on the dog’s neck every 1 to 2 hours.
3. Check the fit regularly to prevent excessive pressure.
4. Ensure the charging rubber cap is securely covered during water activities.
5. The receiver will turn off automatically after a low battery alert.

Operation and Charging

• Choose a suitable USB charger for charging.
• Charge the remote transmitter and receiver for optimal performance.
• Turn the receiver on and off as needed.
• Check the receiver power regularly.

How to Wear Receiver Collar Correctly

• Ensure the receiver collar is worn correctly on your dog for effective training results. Follow the user manual instructions for proper fitting.

Pairing and Testing

• Pair the remote transmitter with the receiver collar as per the user manual instructions. Test the functionality before full training sessions.

Reference Size for Different Dogs

• Refer to the user manual for guidance on choosing the appropriate collar size for different dog breeds and sizes.

FAQ

Q: How often should I charge the collar’s battery?

A: To maintain battery life, it is recommended to charge the collar every 2 months if it is not frequently used.

Q: Can I leave the collar on my dog overnight?

A: Avoid leaving the collar on your dog for more than 18 hours per day to ensure comfort and safety.

STATEMENT

• Thank you for purchasing the remote dog training collar PD 518, this product has been tested to meet your stringent quality standards and is also covered with a warranty for 12 months from the date of its original purchase.
• Please contact us with your order ID and problem or issue, we will respond within 24 hours.
• This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, or a failure to follow operating instructions provided with the product including adding essential oils directly into the tank and base.
• This warranty does not apply to normal wear and tear or commercial use. In no event shall liability exceed the purchase price paid by the purchaser of the product. under no circumstances shall there be a liability for any loss-direct, indirect incidental, or consequential damage arising out of, or in connection with the use of the product.

SAFETY INSTRUCTION

• Training collars are used to train the dogs and not for punishment. Use properly with care and the collar can be a safe and effective tool to train.
• Building communication and strengthening your bond with your best friend.
• Obey all safety messages that follow this instruction to avoid possible injury.
• If your dog has heart disease, high blood pressure, cerebral thrombosis, skin allergies, etc., please do not use it.

REINFORCE LEARNING BEHAVIOURS

• If your dog knows the command but responds inconsistently with your requirement, a training collar can sharpen his skill.
• For example, you have taught your dog to come when calling, but over time he responds slower.
• You can communicate with him via the remote transmitter so that he responds to your call immediately.

1. Set the collar to the initial stimulation level and test it.
2. Fit the collar on your dog’s neck along with his regular collar.
3. Let him roam around the training area. Then give the command and press the stimulation button simultaneously.
4. If your dog moves toward you, stop the stimulation and praise him.
5. If he stops before he reaches you or turns away, repeat the command and continue the stimulation. Again, stop the instant he runs to you and reward him by praising him or feeding him a treat. Repeat this for 3 or 4 times.

Tips

1. If he doesn’t get it for the first few times, don’t give up, and do not increase the stimulation. Try to work on this a few times.
2. During the training period never give the command if you are not able to enforce it. Your dog has to make the mental connection between the static shock/vibration/tone to his behavior (may take a week or more for some dogs).
   Altogether, both methods of stopping unwanted behavior and reinforcing learning behaviors can be applied to nearly every training scenario.

BEFORE USING THE DOG TRAINING COLLAR

1. Do not expose to extreme heat or store at temperatures above 113℉ or 45℃.
2. Please always keep the dog training collar out of reach of children.
3. Charge the remote transmitter and receiver for at least 2 hours when receive them. The collar can’t receive any signals while it is being charged.

WHEN USING THE DOG TRAINING COLLAR

1. Avoid leaving the collar on the dog for more than 18 hours per day.
2. If possible, please reposition the collar on the dog’s neck every 1 to 2 hours.
3. Check the fit to prevent excessive pressure.
4. The charging rubber cap must be closely covered when your dog is swimming or the receiver will get broken when getting into water from the interface. Taking off the receiver is recommended.
5. The receiver will turn off automatically after 10 10-second “beep” sound when the battery is low.

PACKAGE CONTENTS

PD 518-1 (For 1 dog)

• 1 x Remote Transmitter
• 1 x Collar Strap
• 1 x USB Charging Cable
• 1 x Lanyard
• 2 x Long Conductive Silicone Caps
• 2 x Short Conductive Silicone Caps
• 1 x Receiver
• 2 x Long Contact Points
• 2 x Short Contact Points
• 1 x Test Lamp
• 1 x User Manual

PD 518-2 (For 2 dogs)

• 1 x Remote Transmitter
• 2 x Collar Straps
• 1 x Lanyard
• 1 x USB Charging Cable
• 4 x Long Conductive Silicone Caps
• 4 x Short Conductive Silicone Caps
• 2 x Receivers
• 4 x Long Contact Points
• 4 x Short Contact Points
• 1 x Test Lamp
• 1 x User Manual

PD 518-3 (For 3 dogs)

• 1 x Remote Transmitter
• 3 x Collar Straps
• 1 x Lanyard
• 1 x USB Charging Cable
• 6 x Long Conductive Silicone Caps
• 6 x Short Conductive Silicone Caps
• 3 x Receivers
• 6 x Long Contact Points
• 6 x Short Contact Points
• 1 x Test Lamp
• 1 x User Manual

MAINTENANCE

1. Please examine regularly to ensure the tightness of the receiver and eliminate any external damages.
2. Clean the screw caps with alcohol weekly.
3. Examine your dog’s neck and clean up weekly.
4. The battery is rechargeable. To maintain battery life, please charge it every 2 months if it is not often used.

SPECIFICATIONS

Receiver: 56g

Channels| 3 Channels
Remote Range| 1000m /1100yds/3300ft
Battery Capacity| Remote Transmitter: 300mAh

Receiver: 650mAh

Working Time| Remote Transmitter: 180 days Receiver: 25-40 days
Waterproof Level| Remote Transmitter: IPX3

Receiver: IPX7

INTRODUCTION FOR THE BUTTONS

1. Signal Channel Button: Press this button, and choose channel 1, 2, or 3 as the signal channel of dog training before connecting the signals between the remote transmitter and receiver.
   • Note:
   • PD   518-1: For 1 dog only, 1 receiver, you can choose any channel as the signal channel for training your dog, please remember the signal channel you choose, otherwise you have to connect the signal again when training your dog;
   • PD 518-2: For 2 dogs, and 2 receivers, you can choose the same signal channel for the 2 receivers, or you can choose 2 different signal channels, please remember the signal channel of each receiver;
   • PD 518-3: For 3 dogs, and 3 receivers, you can choose the same signal channel for the 3 receivers, or you can choose 3 different signal channels, please remember the signal channel of each receiver;
2. Power Button/ Keylock of Remote: Press to turn the remote transmitter on and off.
3. Static Shock Button: Press the static shock button and the receiver will emit a mild static shock.
4. Vibration Button: Press the vibration button and the receiver will vibrate.
5. Tone Button: Press the tone button and the receiver will emit a tone, with 9 tone types to choose from.
6. The +/ – Button: Increase or decrease the vibration and static shock level, or change the 9 tone types. The LCD screen of the remote will be off and enter standby mode automatically after 10 seconds, if press”+/-” button, static shock levels adjusting is defaulted.
7. LED Light
8. LED Light Button
9. Charging Port Of The Remote Transmitter
10. Contact Points: Choose a suitable length to fit different thicknesses of the dog’s hair.
11. Indicator Light Of The Receiver
12. Power Button Of The Receiver

OPERATION AND CHARGING

How to choose a USB charger

• Please choose the USB charger with the parameters below (we can charge the device by the charger of a smartphone or laptop/ computer USB interface, before that please check if the charger has the following parameters):
• Input: 100-240V ~ 50-60Hz
• Output: 5V 1000mA (or 300mA/500mA)

Charge the remote transmitter

1. Connect the charger cable to the charging port.
2. Plug the charger into a standard socket.
3. The battery icon will flash during charging and be solid when charging is completed.

Charge the receiver

1. Remove the rubber cover, and connect the receiver to a charger into a standard socket.
2. The red indicator will flash slowly when the receiver is charging, and the green indicator will stay on after it is fully charged.

Turn the receiver on and off

1. Turn On: Press the power button once, and the receiver will make a short beep” sound, which means that the receiver is turned on.
2. Turn Off: Press the power button once, and the receiver will make a long beep” sound, and the indicator light will not flash anymore.

Check the receiver power

• When the receiver is turned on, press the power button twice quickly to check the power:
• The receiver beeps 5 times, representing 100% (80-100%)
• The receiver beeps 4 times, representing 80% (60-80%)
• The receiver beeps 3 times, representing 60% 40-60%)
• The receiver beeps 2 times, representing 40% (20-40%)
• Receiver beeps 1 time, representing 20% (1-20%)

HOW TO WEAR RECEIVER COLLAR CORRECTLY

The correct wearing position helps healthy and effective dog training.

1. The receiver shall be placed at the bottom of the dog’s neck, and the screw caps must contact the dog’s skin directly.
2. If your dog has thick hair, please use longer screw caps.
3. The space between the receiver collar and the dog’s neck shall be maintained at a finger distance, which can’t be too loose, otherwise, static shock effectiveness shall be badly influenced.
4. The extra part of the strap can be trimmed, or handled with other methods.

PAIRING AND TESTING

How to pair the remote transmitter and receiver

1. Turn on the remote transmitter, and press the button to choose a signal channel you want to use.
2. Hold the power button on the receiver for 2 seconds, when the indicator light keeps flashing, press one of the function buttons like tone, vibration, or static shock on the remote transmitter to pair.
3. If you do not press the function button within 10 seconds, please pair them again.
4. If you have multiple receivers, you can choose the same signal channel or choose a different channel for pairing.

Test the dog training collar

1. Static shock function test
2. Static shock function can not be seen with the naked eye, please use our test lamp. Press the static shock function button, the test lamp will blink.
3. Vibration function test
4. Press the vibration function button, the receiver will vibrate.
5. Tone function test
   • Press the tone button, the receiver will emit a tone.
   • You need to pair the remote transmitter and receiver before using it on the dog. Please follow the manual for the first time use.
   • Please remember the channel you choose and do not change to another one, or the receiver will not receive signals.
   • When the remote transmitter is turned off, all the functions are locked except the LED light function.

REFERENCE SIZE FOR DIFFERENT DOGS

• Reference weight for dogs
• Large Dog (Body height above 24 inches, Weight above 88 lbs)
• Medium Dog (Height 16-24 inches, Weight 24.2-66 lbs)
• Small Dog (Height 10-16 inches, Weight 8.8-22 lbs)
• Mini Dog (Height under 10 inches, Weight under 8.8 lbs)

FAQ

How old my dog can use dog training collar?

DO NOT use on puppies younger than 6 months.

Can l use dog training collar for more than one dog?

Yes, you can simply add one or two receiver collars to the system to control two or three dogs, because three dog channels are available with one remote transmitter.

What should I do if my dog's neck becomes red and irritated?

Stop using the dog training collar for a few days. If the condition persists beyond 48 hours, please ask your veterinarian to check. Continue to monitor your dog's skin condition closely even if the skin becomes normal.

Can l attach a leash to the receiver ?

NO. This will result in pulling the screw caps contact points) too tightly against your dog's neck. Use a separate collar placed above the receiver.

How do I know when to charge the batteries of the dog training collar?

For Remote Transmitter: The battery level icon will be displayed on the LCD screen. For Receiver: press the power button twice quickly to check the battery level, if only one beep is emitted, charge it in time

How long can I leave receiver on my dog?

The receiver collar is not designed to be worn constantly. We recommend wearing the collar on your dog less than 18 hours per day.

How long should I process my training session for my dog?

Training sessions should be kept positive and short, it is better for about 10-15 minutes each time.

What are the proper levels of static shock for my dog?

Try to find the best suitable levels of static shock for your dog starting from the lowest level. Excessive levels of stimulation will cause a strong response from your dog.

What is the effective distance of your dog training collar?

Without obstacles, the effective distance could be as far as 1000 meters between the remote transmitter and receiver collar. However, in reality, a list of factors, including telecom signal station, magnetic field, obstacle, battery volume, other wireless devices nearby, landform, vegetative cover, etc, will influence the transmission of signals from a remote transmitter and the actual effective distance of the remote transmitter.

Once my dog is trained and has obeyed to my commands, is it still necessary for my dog to continue wearing the receiver ?

Yes, you may need to reinforce your dog's memory with the receiver from time to time.

Any other better training methods?

You can prepare some dog food as a training incentive to achieve better training outcomes. Each time you restrain your dog's misbehavior, you can tell your dog what is supposed to do and what is not. And after a few times of repetitions, your dog will understand what you like and what you don't like.

I want to test static shock function of receiver myself, but it does not work, is anything wrong?

If you test the receiver collar with your hand or leg, please touch the 2 screw cap contact points at the same time, touching only one screw cap contact point will not work.

The dog training collar does not work, or my dog does not respond after correct installation of the dog training collar, how should I solve this problem?

Make sure the battery of the remote transmitter and receiver collar have enough power to operate. Check to see if the receiver collar is turned on. Check the signal channel button on the remote transmitter to ensure signal channels are correctly configured. Try to pair the remote transmitter and receiver again. Take off the receiver collar and test all of the three functions work properly. Make sure the receiver collar is properly worn and the receiver collar is not loose. Trim your dog's hair where the screw caps' contact points can touch the neck.

WARRANTY

• This product is covered with a warranty for 12 months from the date of its original purchase.
• Any defective part will be repaired or replaced at no charge if the appliance has not been tampered with and has been used according to these printed directions.
• If any problems occur, please contact the local dealer immediately to launch a warranty claim.
• Our consumer service representative will respond within 1 business day, advise you on how to correct the problem yourself or instruct you on how to return the defective unit to us for repair or replacement.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>