SCHLAGE F51A Latitude Door Lever with Collins Trim User Manual
- June 15, 2024
- Schlage
Table of Contents
SCHLAGE F51A Latitude Door Lever with Collins Trim
Product Information
Specifications:
- Door hole diameter: 22mm or 25mm
- Template: F10/F40/F51
- Door thickness: 44mm
- Door edge thickness: 35mm
- Recommended height from lock center to floor: 38 (96.5cm)
- Recommended height from lock center to deadbolt center: 4 (10cm)
Product Usage Instructions
Marking the Center of Door Thickness:
- For a circular drive-in, mark the center of the door thickness with a hole diameter of 22mm or 25mm.
Folding on Door Edge:
- Fold the template on the door edge.
Placing the Template:
- Place the template on the high edge of the door bevel. Ensure it is properly aligned.
Recommended Height
- The recommended height from the center of the lock to the floor is 38 (96.5cm). Measure and mark this distance.
Deadbolt Center Height
- The recommended height from the center of the lock to the center of the deadbolt is 4 (10cm). Measure and mark this distance.
Choosing the Distance
- Select the correct distance of either 60mm or 70mm.
Drilling
- Drill a hole with a diameter of 54mm.
FAQ
Q: What are the available hole diameter options?
- A: The available options are 22mm or 25mm.
Q: What template should I use?
- A : Use the F10/F40/F51 template.
Q: What is the recommended door thickness?
- A: The recommended door thickness is 44mm.
Q: What is the recommended door edge thickness?
- A: The recommended door edge thickness is 35mm.
Q: What is the recommended height from the lock centre to the floor?
- A: The recommended height is 38 (96.5cm).
Q: What is the recommended height from the lock center to the deadbolt center?
- A: The recommended height is 4 (10cm).
Q: What are the available distance options?
- A: You can choose between 60mm or 70mm.
Q: What hole diameter should I drill?
- A: Drill a hole with a diameter of 54mm.
Installation Instructions
© Allegion 2014
Printed in U.S.A.
Read User Manual Online (PDF format)
Loading......