DENALI 20V Cordless Jig Saw Kit User Manual

DENALI 20V Cordless Jig Saw Kit

WARNING

• Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State Of California to cause cancer, birth defects Or Other reproductive harm. Some examples Of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and other masonry products.
• Arsenic and chromium from chemically treated lumber.
• Your risk from these exposures varies, depending on how Often this type Of work is done. To reduce the exposure to mentioned chemicals:
• Work in a well-ventilated area.
• Work with approved safety protective equipment (PPE), such as dust masks that are specially designed to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water.
• Do not allow dust to get into your mouth or eyes or rest on the skin as this may promote the absorption Of harmful chemicals.

Safety Warnings

General power tool safety warnings
WARNING

• Read all safety warnings, instructions, illustrations, and specifications provided with this power tool.
• Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
• Save all warnings and instructions for future reference.
• The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

1. Keep work area clean and welt lit. Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk Of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk Of electric shock if your body is earthed Or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away from heat, Oil, sharp edges Or moving parts. Damaged or entangled cords increase the risk Of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. use Of a GFCI reduces the risk Of electric shock.

Personal safety

1. Stay alert, watch what you are doing, and use common sense when operating a power tool.
2. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
3. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
4. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up Or carrying the tool.
5. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
6. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
7. DO not overreach. Keep proper footing and balance at all times. This enables better control Of the power tool in unexpected situations.
8. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
9. If devices are provided for the connection Of dust extraction and collection facilities, ensure these are connected and properly used. Use Of dust collection can reduce dust-related hazards.
10. Do not let familiarity gained from the frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and care

1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
2. DO not use the power tool if the switch does not turn on and Off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
3. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power toot before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk Of starting the power tool accidentally.
4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
5. Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
7. Use the power tool, accessories tool bits, etc. to these instructions, taking into account the working conditions and the work to be performed. use Of the power tool for operations different from those intended could result in a hazardous situation.
8. Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Battery tool use and care

1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type Of battery pack may create a risk Of fire when used with another battery pack.
2. Use power tools only with specifically designated battery packs. use Of any Other battery packs may create a risk of injury and fire.
3. When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, Or Other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
4. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If the liquid contains eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation Or burns.
5. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
6. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 265 OF may cause an explosion.
7. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk Of fire.

Service

1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
2. Never service damaged battery packs. Service Of battery packs should only be performed by the manufacturer or authorized service providers.

Jig saw safety warnings

1. Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting tool may contact hidden wiring. Cutting accessories in contact with a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
2. Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand Or against your body is unstable and may lead to loss Of control.

Additional safety warnings

• Develop a periodic maintenance schedule for your tool. When cleaning a tool be careful not to disassemble any portion of the tool since internal wires may be misplaced or pinched or safety guard return springs may be improperly mounted.
• Certain cleaning agents such as gasoline, carbon tetrachloride, ammonia, etc. may damage plastic parts.

Vibration and noise reduction

• To reduce the impact of noise and vibration emission, limit the time of operation, use low-vibration and low-noise operating modes as well and wear personal protective equipment.

Take the following points into account to minimize the vibration and noise exposure risks:

• Only use the power tool as intended by its design and these instructions.
• Ensure that the power tool is in good condition and well-maintained.
• Use the correct attachments for the power tool and ensure they are in good condition.
• Keep a tight grip on the handles/gripping surfaces.
• Maintain the power tool following these instructions and keep it well-lubricated (where appropriate).
• Plan the work schedule to spread any high-vibration tool use across a longer period.

Residual risks
Even if you are operating this power tool following all the safety requirements, potential risks Of injury and damage remain. The following dangers can arise in connection with the structure and design of this power tool:

• Health defects result from vibration emission if the power tool is used over long periods or not adequately managed and properly maintained.
• Injuries and damage to property due to broken attachments Or the sudden impact Of hidden objects during use.
• Risk of injury and property damage caused by flying objects.
• Risk of getting entangled by the tool’s motor.
• Risk Of inhaling small dust and particles into the lungs.
• Hearing loss due to prolonged noise exposure to noise.

Description of Symbols

• The symbols and abbreviations below are used in these instructions and on the labels on the power tool.
• Get familiarized with the meaning Of these symbols and abbreviations before using the power tool.
• Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

Signal words

• DANGER indicates a hazardous situation which, if not avoided, will result in death Or serious injury.
• WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION, used with the safety alert symbol, indicates a hazardous situation that, if not avoided, could result in minor Or moderate injury.
• NOTICE is used to address practices not related to personal injury.

Symbol explanation

FCC

FCC — Supplier’s Declaration of Conformity

• Unique Identifier AJS8203B-OO – Amazon Brand – Denali by SKIL 20V Jig Saw
• Responsible Party Amazon.com. Services LLC.
• U.S. Contact Information 410 Terry Ave N. Seattle, WA 98109 USA
• Telephone Number 206-266-1000

FCC Compliance Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. this device may not cause harmful interference, and
3. this device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

DANGER

• People with electronic devices, such as pacemakers, should consult their physician(s) before using this product.
• Operation of electrical equipment near a heart pacemaker could cause interference or failure of the pacemaker.

Canada IC Notice

• This Class B digital apparatus complies with Canadian CAN ICES-003(B) / NMB-003(B) standard.

Specifications

• Model number AJS8203B-OO
• Rated voltage 20 V
• No-load speed no O – 2800 pm
• Stroke I” (25 mm)
• Sawing capacity in wood 2-9/16″ (65 mm)
• Sawing capacity in aluminum 5/16″ (8 mm)
• Sawing capacity in metal 15/64″ (6 mm)
• Recommended working temperature +14 to +104 OF (-10 to +40 •C)
• Recommended storage temperature +32 to +104 OF (0 to +40 DC)
• Recommended charging temperature +41 to +104 OF (+5 to +40 oc)
• Net weight approx. 3.64 lbs (1.65 kg) (without battery)
• Dimensions (W x H x D) approx. 8.39 x 8.19 x 2.95″ (21.3 x 20.8 x 7.5 cm) (without battery)

Feedback and Help

• We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.
• Scan the QR code below with your phone camera or QR reader:
• If you need help with your Denali product, please use the website or number below.
• amazon.com/gp/help/customer/contact-us.
• +1 877-485-0385
• amazon.com/denali.
• V02-08/22

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>