Westinghouse W-600 092820 LED Outdoor Lighting Fixture Owner’s Manual

Westinghouse W-600 092820 LED Outdoor Lighting Fixture

Product Information

Specifications

• Product Name: W-600
• Model Number: 092820
• Fixture Warranty: 5 years from purchase date
• Compatible Dimmers: MACL-153M, DVCL-153PR-WH, DVCL-153P, AYCL-153P, SCL-153P, DVCL-253P-WH, MRF2-6CL-WH, PD-10NXD-WH, SCL-153P-WH, PD-6WCL, Legrand Radiant RHCL453P, Leviton DW6HD, IPL06-011-10Z, RDL06-001-10Z, RNL06-001-10Z, TSL06 (10-100% dimming range)
• Not recommended for use with motion sensors, light sensors, timers, or any other external controls

Product Usage Instructions

Assembly Instructions for Outdoor Lighting Fixture

Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty and service. For questions and comments, please visit www.westinghouselighting.com/contact- us.

NOTE: Carefully unpack fixtures and parts. Make sure all parts are included before discarding any packing materials (see Figure 1).

Warnings

• WARNING: ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.
• Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for the safe operation of this fixture.
• When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install the fixture. Return to the place of purchase.

Mounting and Wiring Instructions

• NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.
• CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

1. Turn off the power at the circuit box to avoid possible electric shock.
2. Thread mounting screws (A) into crossbar (B) with mounting screws protruding away from outlet box (C) (see Figure 1).
3. Secure cross bar (B) to outlet box (C) with outlet box screws (D) (if applicable).
4. Identify color coding of fixture wires (see Figure 2).
5. Connect the black wire from the fixture with the black wire (hot wire) from the outlet box by wire connectors (E).
6. Connect the white wire from the fixture with the white wire (neutral wire) from the outlet box by wire connectors (E).
7. If applicable, connect the green wire from the fixture with the green or bare copper wire (ground wire) from the outlet box by wire connectors (E).
8. If a grounding screw (F) is provided, secure the green wire from the fixture to the grounding screw.
9. Secure the back plate (H) of the fixture to the crossbar (B) using cap nuts (I).

FAQ

Q: What is the warranty period for this lighting fixture?

• A: This Westinghouse lighting fixture is warranted against defects in material and workmanship for five years from the purchase date.

Q: What is not covered by the warranty?

• A: The warranty does not cover acts of nature such as lightning damage, corrosion and discoloration of components, damages caused through abuse, improper installation, surges in electric current, or acts of third parties.
• It also does not cover the costs of removing and re-installing the lighting fixture.

Q: Where can I contact for warranty claims?

• A: If this product fails for any reason covered by the warranty, please contact us at www.westinghouselighting.com/contact-us.

FIXTURE WARRANTY

• This Westinghouse lighting fixture is warranted against defects in material and workmanship for five years from the purchase date. This warranty is instead of all other warranties expressed or implied.
• This warranty does not cover acts of nature such as lightning damage, or corrosion and discoloration of components, nor does it cover damages caused through abuse, improper installation, surges in electric current, or acts of third parties.
• This warranty does not cover the costs of removing and re-installing the lighting fixture.
• If this product fails for any reason covered by this warranty, please contact us at www.westinghouse-lighting.com/contact-us.

ASSEMBLY INSTRUCTIONS FOR OUTDOOR LIGHTING FIXTURE

• Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty and service. For questions and comments, please visit www.westinghouselighting.com/contact-us.
  NOTE: Carefully unpack fixtures and parts. Make sure all parts are included before discarding any packing materials (see Figure 1).

• WARNING: ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.

• Read and follow instructions exactly as shown. If instructions are unclear, do not proceed.

• Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essential for the safe operation of this fixture.

• When cutting or drilling into walls or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do not install the fixture. Return to the place of purchase.

• For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provided on the U.L. label and the fixture carton.) Risk of fire. Most dwellings built before 1985 have supply wires rated 60° C.

• Consult a qualified electrician before installing.

• NOTE: THIS FIXTURE IS SUITABLE FOR USE WITH DIMMABLE SWITCHES, SEE BELOW FOR A LIST OF COMPATIBLE DIMMERS.

SCL-153P, DVCL-253P-WH, MRF2-6CL-WH, PD-10NXD-WH,
SCL-153P-WH, PD-6WCL
Legrand Radiant| RHCL453P| 10-100%
Leviton| DW6HD, IPL06-011-10Z, RDL06-001-10Z, RNL06-001-10Z,| 10-100%
TSL06

Not recommended for use with motion sensors, light sensors, timers, or any other external controls.

MOUNTING AND WIRING INSTRUCTIONS

• NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.
• CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

1. Turn off the power at the circuit box to avoid possible electric shock.
2. Thread mounting screws (A) into crossbar (B) with mounting screws protruding away from outlet box (C) (see Figure 1).
3. Secure cross bar (B) to outlet box (C) with outlet box screws (D) (if applicable).
4. Identify color coding of fixture wires (see Figure 2).
5. Connect the black wire from the fixture with the black wire (hot wire) from the outlet box by wire connector (E), and wrap the wire connector with electrical tape for a more secure connection.
6. Connect the white wire from the fixture with the white wire (neutral wire) from the outlet box by wire connector (E), and wrap the wire connector with electrical tape for a more secure connection.
7. Partially thread green grounding screw (F) into side hole (G) of crossbar (B) (see figure 1).
8. Wrap the grounding wire from the fixture around the green grounding screw stem (F) leaving enough excess wire, then connect the excess grounding wire from the fixture with the grounding wire from the outlet box by wire connector (E) (if applicable), then wrap the wire connector (E) with electrical tape for a more secure connection.
9. Tighten grounding screw (F). Do not over-tighten.
10. Tuck wires inside outlet box (C).

FIXTURE ASSEMBLY INSTRUCTIONS

1. Place back plate (H) over mounting screws (A).
2. Secure into place with cap nuts (I).
3. Turn on the power at the circuit box.

WARNING

• Turn off the electricity to the mounting site before beginning installation.
• Mounting instructions must be followed exactly as shown for the fixture to be safely supported.

CLEANING AND CARE

To clean, wipe the fixture with a soft cloth. Clean glass with mild soap. Spraying from chemical cleaners can discolor the finish of the fixture. Do not use scouring pads, powders, steel wool, or abrasive paper to clean this fixture.

ORDERING PARTS

• Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from the place of purchase. Use exact wording from diagrams when ordering parts.
• Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com
• WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse Electric Corporation. Used under license by Westinghouse Lighting. All rights reserved. Made in China

References

• Sustainable LED lighting solutions | Philips lighting
• Ceiling Fans | Lighting Fixtures | Lamps
• Contact Us

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>