WORKPRO W031331AU Water Pump Pliers Set User Manual

Table of Contents

WORKPRO-W031331AU-Water-Pump-Pliers-Set-PRODUCT

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

Children should be supervised to ensure that they do not play with the appliance.
There is a risk of product damage or injury. Do not use for any other purpose.
Do not use this product for tasks beyond its capacity. Do not exceed the maximum cutting capacity of the pliers. This can damage the tool and may cause injury.
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) and protective gloves when using this product.
Always check that all mounting bolts and nuts are securely tightened before using. If any parts are missing, do not use this product until the missing parts are replaced. When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.
Always follow the manufacturer’s instructions and recommendations when using pliers. Failure to do so can result in injury or damage to the tool.
Do not use pliers that have damaged or worn out jaws or handles.
Do not use pliers as hammers or pry bars.
Do not use pliers near flammable or explosive materials. Sparks or heat generated by the tool can ignite these materials.
Do not use grip handles for jobs requiring insulated handles. The grips do not protect against electric shock.
Do not modify or alter the pliers in any way. This can compromise their safety and effectiveness.
The handle of the pliers can only be held by hand, and other methods cannot be used to apply force (such as hitting with a hammer, clamping with a bench vise, etc.).

FAST ADJUSTABLE GROOVE JOINT PLIERS WITH PUSH-BUTTON

Spring-loaded push-button design allows for fast and easy adjustment and secure fit, faster than traditional groove joint pliers. Just push the button to adjust the lower jaw.
- Max. opening of 7″ (180mm) pliers: 1.3″ (33mm)
- Max. opening of 10″ (250mm) pliers: 1.7” (43mm)
- Max. opening of 12″ (305mm) pliers: 1.9″ (50mm)
Premium Chrome Vanadium steel for high strength and durability.
Black phosphating finishing makes the pliers more corrosion-resistant.
V-Jaw design provides multiple points of contact for stronger grip on objects. Powerful angled teeth for secure grip and long tool life, fit to use on pipes, rods, shafts and fasteners of flat, round, square and hex shapes.
Designed with the non-slip ergonomic handle for better grip.

Do not leave water or dirt on your tools, which are easy to cause them to rust. So when you have finished using your pliers, wipe them down with a clean towel, make sure they are clean and dry, and coat them with oil to prevent pliers from rusting.
Regularly check whether all parts are in good condition. If any parts are damaged or worn, replace them immediately. Do not use a damaged or worn part, as it may break or malfunction during use.
Store pliers in a dry and clean place. Avoid exposing them to moisture or extreme temperatures.