Deye SUN-110K-G03 Grid Connected PV Inverter User Manual
- June 15, 2024
- Deye
Table of Contents
- SUN-110K-G03 Grid Connected PV Inverter
- Specifications
- Introduction
- Appearance Introduction
- Parts List
- Safety Warnings and Instructions
- Safety Signs
- Safety Instructions
- Notes for Using
- Operation Interface
- Interface View
- Status Indicator
- Buttons
- LCD Display
- Product Installation
- Select Installation Location
- Mounting Bracket of Inverter
- Inverter Installation
- Electrical Connection
- Startup and Shutdown
- Zero-export Function via Energy Meter
- Multiple Strings and Parallel Connection Meters
- Browsing Load Power on Monitoring Platform
- The Initial Interface
- Statistics Information
- Fault Record
- ON/OFF Setting
- Parameter Setting
- Error Code
SUN-110K-G03 Grid Connected PV Inverter
Specifications
- Product Name: Grid-connected PV Inverter SUN-K-G
- Model: SUN-K-G
Introduction
The Grid-connected PV Inverter SUN-K-G is a high-quality
inverter designed for solar power systems. It efficiently converts
the DC power generated by solar panels into AC power that can be
used to power electrical devices or fed back into the grid.
Appearance Introduction
The SUN-K-G inverter has a sleek and compact design. It features
a durable casing with an LCD display, buttons for control, and
various indicators for status monitoring. The inverter is designed
to be mounted on a wall or other suitable surface.
Parts List
The package includes the following parts:
- SUN-K-G Inverter
- Mounting bracket
- DC input terminal connectors
- AC input terminal connectors
- Ground line connector
- User Manual
Safety Warnings and Instructions
Before using the SUN-K-G inverter, it is important to read and
understand the safety warnings and instructions provided in the
user manual. These instructions outline the proper and safe usage
of the inverter to prevent any accidents or damage.
Safety Signs
The inverter is equipped with safety signs to indicate potential
hazards or precautions that need to be taken during installation
and operation. These signs should be observed and followed at all
times.
Safety Instructions
The safety instructions provide guidelines on how to safely
install, operate, and maintain the inverter. It is crucial to
follow these instructions to ensure the safety of both the user and
the equipment.
Notes for Using
The user manual also includes important notes and guidelines for
using the inverter. These notes provide additional information and
recommendations to optimize the performance and longevity of the
inverter.
Operation Interface
The inverter features an intuitive operation interface that
allows users to easily monitor and control its functions. The
interface includes an LCD display, status indicators, and buttons
for various settings and operations.
Interface View
The interface view provides a detailed description of the LCD
display and its different sections. It explains the meaning of
various symbols, icons, and measurements displayed on the
screen.
Status Indicator
The status indicator lights on the inverter provide real-time
information about its operating status. These indicators help users
identify any issues or abnormalities and take appropriate
action.
Buttons
The buttons on the inverter allow users to navigate through the
menu and make different settings and adjustments. Each button has a
specific function, which is explained in detail in the user
manual.
LCD Display
The LCD display shows important information such as power
output, voltage, current, and system status. It provides a clear
and easy-to-read interface for monitoring the performance of the
inverter.
Product Installation
Select Installation Location
Before installing the inverter, choose a suitable location that
meets the following criteria:
- Adequate ventilation to dissipate heat
- Avoid direct sunlight or exposure to extreme temperatures
- Free from dust, moisture, and corrosive substances
Mounting Bracket of Inverter
The mounting bracket is used to securely attach the inverter to
the wall or other surfaces. Follow the instructions provided in the
user manual to correctly install the mounting bracket and ensure
the stability of the inverter.
Inverter Installation
Once the mounting bracket is installed, carefully place the
inverter onto the bracket and secure it using the provided screws.
Ensure that the inverter is firmly attached and does not wobble or
move.
Electrical Connection
Proper electrical connection is crucial for the safe and
efficient operation of the inverter. Follow these steps to make the
necessary connections:
-
Select the appropriate PV module for your system.
-
Connect the DC input terminals of the inverter to the positive
and negative terminals of the PV module using the provided
connectors. -
Connect the AC input terminals of the inverter to the
electrical grid using appropriate connectors and cables. -
Connect the ground line to ensure proper grounding of the
system.
Startup and Shutdown
The startup and shutdown procedures are important for the proper
functioning of the inverter. Follow these steps:
-
Start up the inverter: Press and hold the
power button until the inverter starts up and enters the operating
mode. -
Inverter Shutdown: To shut down the inverter,
press and hold the power button again until it powers off
completely.
Zero-export Function via Energy Meter
The inverter may have a zero-export function that allows you to
control the amount of power fed back into the grid. This function
can be activated and adjusted using an energy meter or monitoring
platform. Consult the user manual for detailed instructions on how
to use this function.
Multiple Strings and Parallel Connection Meters
If you have multiple strings or parallel connection meters in
your solar power system, refer to the user manual for specific
instructions on how to configure and connect these components to
the inverter.
Browsing Load Power on Monitoring Platform
The user manual provides step-by-step instructions on how to use
a monitoring platform to browse the load power of your PV grid-tie
plant. Follow these instructions to access and analyze the power
consumption and production data of your system.
General Operation
The Initial Interface
Upon startup, the inverter will display an initial interface
that provides basic information about the system. This interface
may include power output, voltage, current, and other relevant
measurements.
Statistics Information
The inverter keeps track of various statistics related to power
generation and consumption. These statistics can be accessed
through the menu and provide valuable insights into the performance
of your solar power system.
Fault Record
In case of any faults or errors, the inverter records the
details of the incident. These fault records can be reviewed to
identify and troubleshoot any issues that may arise during
operation.
ON/OFF Setting
You can adjust the ON/OFF settings of the inverter to control
its behavior and power output. The user manual provides
instructions on how to change these settings based on your specific
requirements.
Parameter Setting
The inverter offers various parameters that can be adjusted to
optimize its performance and adapt to different conditions. These
parameters may include voltage limits, power factor settings, and
other configurable options. Refer to the user manual for guidance
on parameter setting.
Repair and Maintenance
The user manual provides recommendations for repair and
maintenance of the inverter. It includes guidelines on cleaning,
inspection, and troubleshooting common issues. Follow these
instructions to ensure the longevity and reliability of your
inverter.
Error Information and Processing
Error Code
In case of any errors or malfunctions, the inverter may display
specific error codes to indicate the nature of the problem. The
user manual lists these error codes along with their possible
causes and recommended actions for troubleshooting.
FAQ
Q: Can the inverter be installed outdoors?
A: It is recommended to install the inverter in a protected
location to prevent exposure to extreme weather conditions. If
outdoor installation is necessary, ensure proper weatherproofing
measures are taken.
Q: How do I reset the inverter?
A: To reset the inverter, locate the reset button (if available)
or disconnect the power supply for a few seconds and then reconnect
it.
Q: Can I connect multiple inverters in parallel?
A: The user manual provides instructions on how to configure and
connect multiple inverters in parallel. Follow these guidelines
carefully to ensure proper synchronization and operation.
Q: What should I do if the inverter displays an error code?
A: Consult the user manual for the specific error code and
recommended actions. In most cases, the error can be resolved by
following the troubleshooting steps provided.
R
Grid-connected PV Inverter
SUN-K-G
SUN-K-G
SUN-K-G
SUN-K-G
SUN-K-G
SUN-K-G
User Manual
. Introduction
………………………………………………………… – –
. Appearance Introduction …………………………………………………… – –
. Parts list
……………………………………………………………… – –
. Safety warnings and instructions ……………………………………… – –
. Safety signs
………………………………………………… – –
. Safety instructions
………………………………………………… – –
. Notes for using
…………………………………………………… – –
. Operation Interface
……………………………………………… – –
. Interface View
………………………………………………………… – –
. Status Indicator
……………………………………………………… – –
. Buttons
…………………………………………… – –
. LCD Display
……………………………………………… – –
. Product installation …………………………………………………………… – –
. Select installation location ………………………………………………… – –
. Mounting bracket of inverter ………………………………………………… – –
. Inverter Installation
………………………………………………… – –
. Electrical Connection ……………………………………………………… – –
. PV Module Selection
……………………………………………… – –
. DC input terminal connection ……………………………………………… – –
. AC input terminal connection ……………………………………………… – –
. The connection of the ground line ………………………………………… – . Startup and Shutdown …………………………………………………… – –
. Start up the inverter
………………………………………………… – –
. Inverter Shutdown
………………………………………………………… – –
. Zero-export function via energy meter …………………………… – –
. Multiple strings and parallel connection meters ……………………… – . How to browse the load power of your PV grid-tieplant on monitoring platform? – –
. General Operation
…………………………………………… – –
. The initial interface . Statistics information
…………………………………………… – ……………………………………………… – –
. Fault Record
……………………………………………… – –
. ON/OFF setting
……………………………………………… – –
. Parameter setting
…………………………………………………… – –
. Repair and Maintenance ……………………………………………… – –
. Error information and processing……………………………………… – –
. Error code
………………………………………………………… – –
. Specification ……………………………………………………………… – –
. EU Declaration of Conformity
…………………………………… – –
About This Manual
The manual mainly describes the product information, guidelines for
installation, operation and maintenance. The manual cannot include complete
information about the photovoltaic (PV) system.
How to Use This Manual
Read the manual and other related documents before performing any operation on
the inverter. Documents must be stored carefully and be available at all
times. Contents may be periodically updated or revised due to product
development. The information in this manual is subject to change without
notice. The latest manual can be acquired via service@deye.com.cn
. Introduction
. Appearance Introduction
On-grid inverter can convert solar panel DC power into AC power which can
directly input to the grid. Its appearance is shown below. These models
contain SUN-K-G, SUN-K-G, SUN-K-G, SUN-K-G, SUN-K-G, SUN-K-G. The following is
collectively referred to as “inverter”.
DC
AC
Nomal
Alarm
UP
Esc
Enter
Down
Pic . Front view
Pic . Bottom view – –
. Parts list
Please check the following table, to see whether all the parts are included in
the package
DC
AC
Nomal
Alarm
UP
Esc
Enter
Down
Grid-tied PV String Inverter x
Wall mounting bracket x
Mounting stainless steel screws M× x
Wrench x
DC+/DC- Plug connectors including metal terminal
x N pairs
Stainless steel anti-collision bolt M× x
T-type wrench x
Installation screws M× x
Cold-Pressed Terminal x
*Sensor Clamp (optional)x
5ISFF1IBTF4NBSU.FUFS 4&5 &4$
Datalogger (optional) x
Meter(optional) x
User manual
User manual x
– –
. Safety warnings and instructions
Improper use may result in potential electric shock hazards or burns. This
manual contains important instructions that should be followed during
installation and maintenance. Please read these instructions carefully before
use and keep them for future reference. . Safety signs Safety symbols used in
this manual, which highlight potential safety risks and important safety
information, are listed as follows:
Warning: Warning symbol indicates important safety instructions, which if not
correctly followed, could result in serious injury or death.
Shock Hazard: Caution, risk of electric shock symbol indicates important
safety instructions, which if not correctly followed, could result in electric
shock.
Safety Hint: Note symbol indicates important safety instructions, which if not
correctly followed, could result in some damage or the destruction of the
inverter.
High Temperature Hazard: Caution, hot surface symbol indicates safety
instructions, which if not correctly followed, could result in burns.
. Safety instructions
Warning: Electrical installation of the inverter must conform to the safety
operation rules of the country or local area.
Warning: Inverter adopts non-isolated topology structure, hence must insure DC
input and AC output are electrical isolated before operating the inverter.
Shock Hazard: Prohibit disassembling inverter case, there existing shock
hazard,which may cause serious injury or death, please ask qualified person to
repair.
– –
Shock Hazard: When PV module is exposed to sunlight, the output will generate
DC voltage. Prohibit touching to avoid shock hazard. Shock Hazard: While
disconnect the input and output of the inverter for maintenance, please waits
for at least mins until the inverter discharge the remnant electricity. High
Temperature Hazard: Local temperature of inverter may exceed while under
operating. Please do not touch the inverter case.
. Notes for using The three phase string power inverter is designed and tested
under related safety regulations. It can ensure the personal safety of the
user. But as a electric device, it may cause shock or injury by incorrect
operation. Please operate the unit under below requirements: . Inverter should
be installed and maintained by qualified person under local standard
regulations. . Must disconnect the AC side first, then disconnect DC side
while doing installation and
maintenance, after that, please wait at least mins to avoid getting shocked. .
Local temperature of the inverter may exceed while under operating.Do not
touch
to avoid getting injured. . All electrical installation must be in accordance
with local electrical standards, and
achieved permission of local power company. . Please take appropriate anti-
static measure. . Please install where children can not touch.
– –
. Operation Interface
. Interface View
Pic . Front panel display
. Status Indicator
The inverter panel has indicators, the left one is dc output indicators, green indicates normal DC input. Beside is the AC indicator, green indicating normal ac connection. Beside the AC indicator is the operating indicator, green indicating normal output. The right indicator is alarm. red indicates alarming.
Indicator ° ° ° °
status on off on off on off on off
Explanation Inverter detects DC input Low DC input voltage Grid Connected Grid Unavailable Under normal operating Stop operating Detected faults or report faults Under normal operating
Table . Status indicator lights
– –
. Buttons There are four buttons on the inverter panelAbove is Up and increase
button(UP), Below is down and decrease button(DOWN), Left is ESC button(ESC),
Right is Enter button(ENTER). Achieving below functions by the four buttons
Page turning (use UP and DOWN button Modify adjustable parameters (use ESC and
ENTER button . LCD Display Three phase string inverter use * dot formation
display, Display below content Inverter operation status and information;
Operating information; Warning message and malfunction display.
– –
. Product installation . Select installation location
To select a location for the inverter, the following criteria should be
considered: WARNING: Risk of fire Do not install the inverter in areas
containing highly flammable materials or gases. Do not install the inverter in
potentially explosive atmospheres. Do not install in small closed spaces where
air can not circulate freely. To avoid overheating,
always make sure the flow of air around the inverter is not blocked. Exposure
to direct sunlight will increase the operational temperature of the inverter
and
may cause output power limiting. It is recommended that inverter installed to
avoid direct sunlight or raining. To avoid overheating ambient air temperature
must be considered when choosing the inverter installation location. It is
recommended that using a sun shade minimizing direct sunlight when the ambient
air temperature around the unit exceeds °F/.
Pic . Recommended installation place
– –
Install on a wall or strong structure capable of bearing the weight. Install
vertically with a maximum incline of +/-°. If the mounted inverter is tilted
to an angle greater than the maximum noted, heat dissipation can be inhibited,
and may result in less than expected output power. If install more than one
inverter, must leave at least mm gap between each inverter. And each inverter
must be at least mm above and below.And must install the inverter at the place
where children cannot touch. Please see picture .. Consider whether the
installation environment is helpful to see the inverter LCD display and
indicator status clearly. Must offer a ventilate environment if inverter
installed in the airtight house.
Safety Hint: Do not place or store any items next to the inverter.
15¢
Pic . Installation Angle
– –
500mm
500mm
Pic . Installation Gap
. Mounting bracket of inverter
Pic . Mounting bracket dimensions – –
. Inverter Installation
The inverter should be mounted in a vertical position. The steps of mounting
are as follows . For brick walls, the position of the holes should be suitable
for the expansion bolts. . Make sure the bracket is horizontal and the
mounting holes are in the correct points. Drilling the holes on the wall
according the marks. . Using the expansion bolts to fix the bracket to the
wall.
Anchoring Mounting bracket
Stainless steel screws Inverter
Pic . Inverter Installation
– –
. Electrical Connection
. DC input terminal connection
. Switch the Grid Supply Main Switch(AC)OFF. . Switch the DC lsolator OFF. .
Assemble PV input connector to the inverter.
Warning: When using PV modules, please ensure the PV+ & PV- of solar panel is
not connected to the system ground bar.
Safety Hint: Before connection, please make sure the polarity of the output
voltage of PV array matches the “DC+” and “DC-” symbols.
Warning: Before connecting inverter, please make sure the PV array open
circuit voltage is within the V of the inverter.
Pic . DC+ male connector
Pic . DC- female connector
Safety Hint: Please use approved DC cable for PV system.
Cable type
Industry generic PV cable (model: PV-F)
Cross sectionmm
Range
Recommended value
.~. (~AWG)
.(AWG)
Table . DC Cable Specifications
– –
The steps to assemble the DC connectors are listed as follows: a) Strip off
the DC wire about mm, disassemble the connector cap nut (see picture .).
NN NN
Pic . Disassemble the connector cap nut b) Crimping metal terminals with
crimping pliers as shown in picture ..
Pic . Crimp the contact pin to the wire c) Insert the contact pin to the top
part of the connector and screw up the cap nut to the top
part of the connector. (as shown in picture .).
Pic . connector with cap nut screwed on
– –
d) Finally insert the DC connector into the positive and negative input of the inverter, shown as picture .
Pic . DC input connection
Warning: Sunlight shines on the panel will generate voltage, high voltage in series may cause danger to life. Therefore, before connecting the DC input line, the solar panel needs to be blocked by the opaque material and the DC switch should be ‘OFF’, otherwise, the high voltage of the inverter may lead to lifethreatening conditions.
Warning: Please use its own DC power connector from the inverter accessories.
Do not interconnect the connectors of different manufacturers.Max. DC input
current should be A. if exceeds, it may damage the inverter and it is not
covered by Deye warranty.
. AC terminal connection
Model
SUN-K-G SUN-K-G SUN-K-G SUN-K-G SUN-K-G SUN-K-G
Wire Size
AWG AWG AWG AWG /AWG /AWG
Cable(mm )
. . . .
Torque value(max)
.Nm .Nm .Nm .Nm .Nm .Nm
Table . Recommened cable specifications
Warning: The AC cable line L is connected to socket ; L is connected to socket ; L is connected to socket , the PE line is connected to the earth , the N wire is connected to the socket of N.
– –
AC wire installation method: ) Remove the fixing screws on the AC junction box of the inverter as shown in Pic .. After removing the junction box, you can see the terminals of the inverter. The default is digits as shown in Pic ..
Pic . AC junction box
Pic . AC terminal
) Connect the cable through the junction box, waterproof jacket, and insert into the terminal (The picture Pic . shows the connection mode of three phase lines connected to the junction box, ground wire screwed on the inverter shell) , and use hexagon screwdriver to presses the wiring harness to the connect terminal as shown in Pic ..
L2 PE L3 L1 N
Pic . AC cable connected t o the terminal
Pic . Tightening the AC connection cable
– –
) Screw the AC connection cover back to the shell and tighten all the screws to tighten the waterproof protection connector, as shown in Pic .
Pic . Tighten the AC junction box .. Recommended current protector specifications
Inverter
Rated voltage
Rated output powerKW Current protection deviceA
SUN-K-G
SUN-K-G
SUN-K-G
SUN-K-G
SUN-K-G
SUN-K-G
Table . Recommended current protector specifications
– –
. Connection of the ground line
Good grounded is important for resist the surge voltage shock and improve
EMI’s performance. So before the connection of AC, DC, communication
connections, inverter needs to ground first. For a single system, just ground
the PE cable; For multiple machine systems, all PE cables of the inverter need
to be connected to the same grounding copper platoon to ensure the equipotent
connection. The installation of the shell ground wire is shown as Pic ..The
external protective earthing conductor is made of the same metal as the phase
conductor.
Pic . The installation of the shell ground wire
Model SUN-K-G SUN-K-G SUN-K-G SUN-K-G SUN-K-G SUN-K-G
Wire Size /AWG /AWG /AWG /AWG /AWG /AWG
Cable(mm ) . . . . . .
Torque value(max) .Nm .Nm .Nm .Nm .Nm .Nm
Table . Recommened cable specifications
Warning: Inverter has built-in leakage current detection circuit, If an external leakage current protection device is connected, its operating current must be greater than mA or higher, otherwise inverter may not work properly.
. Inverter monitoring connection
Inverter has the function of wireless remote monitoring inverter. The inverter
has Wifi function and Wifi Plug in the accessories is used to realize the
connection between the inverter and the network. The operation, installation,
networking, APP download are detailed in the WIFI PLUG instructions. Figure .
is the Internet monitoring solution.
—
GPRS
Phone
WIFI
Router
Web Server
Pic . Internet monitoring solution
.. Installation of datalogger
When installing the WiFi stick, tear off the sealing strip on the inverter.
Insert the datalogger into the interface and fix it with a screw. The
configuration of the datalogger needs to be performed after various electrical
connections have been completed and the inverter DC power on. When the
inverter is on the DC power, it is determined whether the datalogger is
normally electrified (The LED light shines out of the shell).
Pic . datalogger installation diagram – –
.. Configuration of datalogger For the configuration of datalogger, please
refer to illustrations of the datalogger. . Start up and Shut off Ensure that
the inverter meets the following conditions before starting the inverter,
otherwise it may cause fire or damage to the inverter without quality
assurance, at the same time the situation on our company does not undertake
any responsibility. At the same time, to optimize the system configuration, it
is recommended that the two inputs be connected to the same number of PV
modules.
a). The maximum open circuit voltage of each set of PV modules shall not
exceed Vdc under any conditions.
b). Each input of the inverter better use the same type of PV module in
series. c). Total output power of PV shall not exceed the maximum input power
of inverter, each PV
modules shall not exceed the rated power of each channel. . Start up the
inverter When starting up the inverter, should fellow steps below
. Starting switch on the AC breaker. . Turn on the DC switch of the PV module,
and if the panel provides sufficient starting voltage
and power, the inverter will start. . The inverter will first check the
internal parameters and the grid parameters, while the liquid
crystal will show that the inverter is self-checking. . If the parameter is
within acceptable range, the inverter will generate energy.
NORMAL indicator light is on. . Shut off the inverter Must follow below steps
while Shutting down the inverter:
. Switch off the AC breaker. . Wait for seconds, turn off the dc switch (if
any), or simply disconnect the dc input
connector. The inverter will close the LCD and all led within two minutes.
– –
. Zero-export function via energy meter
There’re four kinds of energy meters for this series inverter. First type is
Eastron SDM-Modbus V which is able to measure the Max. A current directly.
More details please refer to Pic . & .. For the Eastron SDM MCT mA, it needs
external CT to measure the current. The CT power range is from A-A. More
details about the Eastron SDM MCT, please refer to Pic . & .. Also, the CHNT
meter DTSU is supported, it can measure the Max. A current directly. More
details about the DTSU, please refer to Pic . – .. When you are reading this,
we believe that you have completed the connection according to the
requirements of chapter , if you have been running your inverter at this time,
and you want to use the zero-export function, please turn off AC and DC switch
of the inverter, and wait for minutes until the inverter completely
discharged. For system wiring diagram, the red line refers to L line (L, L,
L), the black line refers to the neutral line (N). Connecting energy meter RS
cable to inverter’s RS port. It’s recommended to install an AC switch between
the inverter and the utility grid, the specs of the AC switch are determined
by the power of load. If there is no integrated DC switch inside the inverter
you purchased, we commend you to connect the DC switch. The voltage and
current of the switch depend on the PV array you access.
– –
&BTUSPO
1234 5678
(,,,)
5 6 7 8
Eastron SDM-Modbus V
RS
B A G
RS B RS A GND
Pic . Eastron meter
Solar Panel array
Inverter
(,,,)
AC Breaker for grid port SUN-K-G:A AC breaker SUN-K-G: A AC breaker SUN-K-G: A
AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker
VCC_V GND
AC Breaker
RS Male connector
L L L N
_B RS Female connector
_A
N L L L
Home load
L L L N
meter
_A
_B
RS Communication
GND
5 6 7 8
L L L N
L L L N
Pic . Connection diagram of Eastron meter
Grid
Warning: In final installation, breaker certified according to IEC – and IEC – shall be installed with the equipment.
– –
&BTUSPO
1234 5678
(,,,)
5 6 7 8
Eastron SDM-Modbus V
RS
B A G
RS B RS A GND
Pic . Eastron meter
(,,,)
Solar Panel array
VCC_V GND
Inverter
AC Breaker for gen port SUN-K-G:A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker
AC Breaker
RS Male connector
L L L N
_B RS Female connector
_A
N L L L
Home load
L L L N
meter
_A
_B
RS Communication
GND
5 6 7 8
L L L N
L L L N
Pic . Connection diagram of Eastron meter
Generator
– –
P HASE W IR E
9 10 11 12 13 14 15 16 17 18 19 20
&BTUSPO
6* &4$
.
P2 P1
P2 P1 S2
S1
P2 P1 S2
S1
S2
S1
L1 L2 L3 N
1
&
1 2 3 4 5 6 7 8
1 2 3 4 5 6 15 16 17 18 19 20
Grid voltage Auxiliary sampling power supply
Current inputs
RS
Eastron SDMMCT
Pic . Eastron meter
RS A RS B GND
Solar Panel array
VCC_V GND
Inverter
_B RS Female connector
_A
AC Breaker RS Male connector
AC Breaker for grid port SUN-K-G:A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker
black line White line
black line White line
CT3
black line White line
CT2
CT1
Home load
Note: the arrow direction towards the inverter
6* &4$
. 1
&
N L L L
12345678
N L L L LA NA
GND B A S2 S1 S2 S1 S2 S1
9 10 11 12 13 14 15 16 17 18 19 20
Eastron
_A
_B
RS Communication
GND
meter
L L L N
Grid
Pic . Connection diagram of Eastron meter
– –
P HASE W IR E
9 10 11 12 13 14 15 16 17 18 19 20
&BTUSPO
6* &4$
.
P2 P1
P2 P1 S2
S1
P2 P1 S2
S1
S2
S1
L1 L2 L3 N
1
&
1 2 3 4 5 6 7 8
1 2 3 4 5 6 15 16 17 18 19 20
Grid voltage Auxiliary sampling power supply
Current inputs
RS
Eastron SDMMCT
Pic . Eastron meter
RS A RS B GND
Solar Panel array
VCC_V GND
Inverter
_B RS Female connector
_A
AC Breaker RS Male connector
AC Breaker for gen port SUN-K-G:A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker
black line White line
black line White line
CT3
black line White line
CT2
CT1
Home load
Note: the arrow direction towards the inverter
6* &4$
. 1
&
N L L L
12345678
N L L L LA NA
GND B A S2 S1 S2 S1 S2 S1
9 10 11 12 13 14 15 16 17 18 19 20
Eastron
_A
_B
RS Communication
GND
meter
L L L N
Generator
Pic . Connection diagram of Eastron meter
– –
5ISFF1IBTF4NBSU.FUFS
4&5 &4$
CHNT DTSU
(,,,) RS Pic . CHNT meter
(,,,)
Solar Panel array
Inverter
AC Breaker RS Male connector
AC Breaker for grid port SUN-K-G:A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker
N L L L
VCC_V GND
_B
RS Female connector
_A
_A
_B
RS Communication
L L L N
meter
5ISFF1IBTF4NBSU.FUFS
4&5 &4$
L L L N
Home load
Grid Pic . Connection diagram of CHNT meter
– –
5ISFF1IBTF4NBSU.FUFS
4&5 &4$
CHNT DTSU
(,,,) RS Pic . CHNT meter
(,,,)
Solar Panel array
Inverter
AC Breaker RS Male connector
AC Breaker for gen port SUN-K-G:A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker
N L L L
VCC_V GND
_B
RS Female connector
_A
_A
_B
RS Communication
L L L N
meter
5ISFF1IBTF4NBSU.FUFS
4&5 &4$
L L L N
Home load
Generator
Pic . Connection diagram of CHNT meter
– –
7
_”N” )[
5ISFF1IBTF4NBSU.FUFS 4&5 &4$
CHNT DTSU
x/V A/mA
3 6 9 10131416171921
L1 L2 L3
24 25
AB RS485
Phase C current =.A
Pic . CHINT meter
Phase A current =5.000A Phase B current =5.001A
Solar Panel array
VCC_V GND
Inverter
_B RS Female connector _A
AC Breaker RS Male connector
AC Breaker for grid port SUN-K-G:A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker
7
_”N” )[
5ISFF1IBTF4NBSU.FUFS 4&5 &4$
L L L N
Home load
N L L L
_A
_B
RS Communication
Black line White line
Black line White line Black line White line
L L L N
Note: the arrow direction towards the inverter
Grid
Pic . Connection diagram of CHNT meter
– –
7
_”N” )[
5ISFF1IBTF4NBSU.FUFS 4&5 &4$
CHNT DTSU x/V
3 6 9 10131416171921
L1 L2 L3
24 25
AB RS485
Phase C current =.A
Pic . CHINT meter
Phase A current =.A Phase B current =.A
Solar Panel array
VCC_V GND
Inverter
_B RS Female connector _A
AC Breaker RS Male connector
AC Breaker for gen port SUN-K-G:A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker SUN-K-G: A AC breaker
7
_”N” )[
5ISFF1IBTF4NBSU.FUFS 4&5 &4$
L1 L2 L3 N
Home load
N L3 L2 L1
_A
_B
RS Communication
Black line White line
Black line White line Black line White line
L1 L2 L3 N
Note: the arrow direction towards the inverter
Generator
Pic . Connection diagram of CHNT meter
Safety Hint: Ensuring grid input cables connect /// port of energy meter, and
inverter AC output cables connect /// port of energy meter when connecting.
– –
. Press Enter button on the LCD panel in the main interface into the menu options, select [parameter setting] to enter setup submenu, and then select [run param], at this time please input the default password through pressing the button [up down, enter], enter the operation parameter setting interface, shown as picture ..
MENUvSetupvRun Param
ActiveP % QMode QU
ReactP PF
.% .
Fun_ISO ON Fun_RCD ON
OK
SelfCheck S
Island
OFF
Meter
ON
Limiter
OFF
Feed_In % MPPT Num
Cancel
Pic . Zero-export function via meter setting interface
. Operate the button [up down], move setting cursor to energy meter and press
the button [enter]. At this time you can turn on the energy meter by choosing
[up down] button, please press [enter] button to confirm when setting done.
. Move the cursor to [OK], press [enter] to save the settings and exit the
running parameters page, otherwise the settings are invalid.
. If set up successfully, you can return to the menu interface, and display
the LCD to [home page] by press the [up down] button. If it displays [meter
power XXW], the zero-export function setting is completed. Shown as picture ..
PARAMETR
Meter
SN:
Meter Power:
W
Load Power:
.kW
Day
Total
ImpEp : .kWh
.MWh
ExpEp : .kWh
.KWh
LoadEp : .kWh
.MWh
Pic . Zero-export function via energy meter turn on
. Meter power W shows positive means grid is supplying the load, and no power
fed into grid. if meter power shows negative, it means PV energy is being sold
to grid or energy meter wiring conncetion has problem.
. After properly connection is done, wait for inverter starting. If the power
of the PV array meets the current power consumption, the inverter will keep a
certain output to counteract the power of the grid without backflow .
– –
. Multiple strings and parallel connection meters
This application is that when the string inverters work in parallel, there is
only one power grid and one load, and only one meter can be connected to
prevent reverse current, so only this many-to-one anti-reverse current
connection can be connected.
If there’re several inverters parallelling operation in a plant, also it can
use pcs meter to realize zero export function.For example, if there’re pcs
inverters parallelling operation in the system with pcs meter.We need to setup
pcs inverteras the master and others setup as slaves. And, all of them need to
connect to the meter via RS.Below is the system diagram and configuration of
the system.
MENU Setting
Exp_Mode AVG
CT_Ratio
MFR
AUTO
FeedIn .KW
Shunt
OFF
ShuntQTY
Back
Generator ON
G.CT
G.MFR
AUTO
G.Pout %
G.Cap . KW
Pic . Meter function
– –
Name
Exp_Mode
CT_Ratio MFR Feedin Shunt
Description
AVG: Average power of three phase is zero exported. MIN: Phase with minimum
load power is zero exported, while the other two phase may be in purchase
mode.
Range AVG/MIN
CT ratio of power grid side meter when extern CT is applied.
–
Manufacturer of the grid side meter. Modbus Address of it should be set as .
Percentage of the Feed in power exported to the grid.
Parallel mode. Set one inverter as Master, others are Slave. ONLY need to set
the master, Slave will follow the settings in the master.
AUTO/CHNT/ EASTRON
-%
OFF/Master/ Slave
ShuntQTY Generator G.CT
G.MFR G.Pout G.Cap
Number of inverters in parallel
DG side meter function Enable/Disable CT ratio of power DG side meter when
extern CT is applied.
Manufacturer of the DG side meter. Modbus Address of it should be set as .
Output power percentage of the DG. Capacity of the DG.
– ON/OFF
–
AUTO/CHNT/ EASTRON -% -kW
Note: Select Meter option in Run Param and long press ENTER button to enter
this
Meter Setting page.
– –
&BTUSPO
1234 5678
(,,,)
B A G
5 6 7 8
RS 485
RS485B RS485A GND
Eastron SDM-Modbus V Pic . Eastron meter
(5,6,7,8)
Grid meter
GND (as short as possible)
_A (as short as possible)
_B (as short as possible)
GND (as short as possible)
_A (as short as possible)
_B (as short as possible)
Master(Mst) R S
485_B
485_A
GND
VCC_V GND
Solar Panel array Solar Panel array Solar Panel array
_B
RS Female connector
_A
Slave(Slv)
R S
Slave(Slv) R S
Master(Mst) Slave(Slv) Slave(Slv)
L L L N load AC Breaker L L L N
AC Breaker L L L N
AC Breaker
L L L N
AC Breaker
Grid L L L N
5 6 7 8
L1 L2 L N
Pic . Eastron Connection diagram(The pass-through table)
– –
&BTUSPO
1234 5678
(,,,)
B A G
5 6 7 8
RS 485
RS485B RS485A GND
Eastron SDM-Modbus V Pic . Eastron meter
(5,6,7,8)
Generator meter
GND (as short as possible)
_A (as short as possible)
_B (as short as possible)
GND (as short as possible)
_A (as short as possible)
_B (as short as possible)
Master(Mst) R S
485_B
485_A
GND
VCC_V GND
Solar Panel array Solar Panel array Solar Panel array
_B
RS Female connector
_A
Slave(Slv)
R S
Slave(Slv) R S
Master(Mst) Slave(Slv) Slave(Slv)
L L L N load AC Breaker L L L N
AC Breaker L L L N
AC Breaker
L L L N
AC Breaker
Generator L L L N
5 6 7 8
L1 L2 L N
Pic . Eastron Connection diagram(The pass-through table)
– –
3 PHASE 4 WIRE
9 10 11 12 13 14 15 16 17 18 19 20
&BTUSPO
6* &4$
. 1
&
1 2 3 4 5 6 7 8
Eastron SDMMCT
P2 P1
P2 P1 S2
S1
P2 P1 S2
S1
S2
S1
L1 L2 L3 N
1 2 3 4 5 6 15 16 17 18 19 20
Grid voltage Auxiliary sampling power supply
Current inputs
RS Pic . Eastron meter
RSA RSB GND
Solar Panel array Solar Panel array Solar Panel array
Master(Mst) Slave(Slv) Slave(Slv)
AC Breaker
L L L N
AC Breaker
L L L N
AC Breaker
L L L N
L L L N load
AC Breaker
VCC_V GND
_B
RS Female connector
_A
Note: the arrow direction towards the inverter
black line White line
black line White line
black line White line
CT3 CT2 CT1
L L L N
6* &4$
. 1
&
12345678
N L L L LA NA
GND B A S S S S S S
9 10 11 12 13 14 15 16 17 18 19 20
&BTUSPO
Master(Mst) R S
_B
_A
GND
Grid meter
Grid
GND (as short as possible)
_A (as short as possible)
_B (as short as possible)
GND (as short as possible)
_A (as short as possible)
_B (as short as possible)
Slave(Slv)
R S
Slave(Slv) R S
Pic . Connection diagram(Three-phase electricity )
– –
3 PHASE 4 WIRE
9 10 11 12 13 14 15 16 17 18 19 20
&BTUSPO
6* &4$
. 1
&
1 2 3 4 5 6 7 8
Eastron SDMMCT
P2 P1
P2 P1 S2
S1
P2 P1 S2
S1
S2
S1
L1 L2 L3 N
1 2 3 4 5 6 15 16 17 18 19 20
Grid voltage Auxiliary sampling power supply
Current inputs
RS Pic . Eastron meter
RSA RSB GND
Solar Panel array Solar Panel array Solar Panel array
Master(Mst) Slave(Slv) Slave(Slv)
AC Breaker
L L L N
AC Breaker
L L L N
AC Breaker
L L L N
L L L N load
AC Breaker
VCC_V GND
_B
RS Female connector
_A
Note: the arrow direction towards the inverter
black line White line
black line White line
black line White line
CT3 CT2 CT1
L L L N
6* &4$
. 1
&
12345678
N L L L LA NA
GND B A S S S S S S
9 10 11 12 13 14 15 16 17 18 19 20
&BTUSPO
Master(Mst) R S
_B
_A
GND
Generator meter
Generator
GND (as short as possible)
_A (as short as possible)
_B (as short as possible)
GND (as short as possible)
_A (as short as possible)
_B (as short as possible)
Slave(Slv)
R S
Slave(Slv) R S
Pic . Connection diagram(Three-phase electricity )
– –
5ISFF1IBTF4NBSU.FUFS
(,,,)
4&5 &4$
CHNT DTSU
RS Pic . CHNT meter
(,,,)
Solar Panel array Solar Panel array Solar Panel array
Master(Mst) Slave(Slv) Slave(Slv)
AC Breaker
L L L N
AC Breaker
L L L N
AC Breaker
L L L N
VCC_V GND
_B
L1 L2 L3 N load
RS Female connector
_A
AC Breaker
Master(Mst) R S
_B
_A
GND
5ISFF1IBTF4NBSU.FUFS 4&5 &4$
_A (as short as possible)
_B (as short as possible)
_A (as short as possible)
_B (as short as possible)
L1 L2 L3 N
Slave(Slv)
R S
Slave(Slv) R S
Grid
Pic . CHNT Connection diagram(The pass-through table)
– –
5ISFF1IBTF4NBSU.FUFS
(,,,)
4&5 &4$
CHNT DTSU
RS Pic . CHNT meter
(,,,)
Solar Panel array Solar Panel array Solar Panel array
Master(Mst) Slave(Slv) Slave(Slv)
AC Breaker
L L L N
AC Breaker
L L L N
AC Breaker
L L L N
VCC_V GND
_B
L1 L2 L3 N load
RS Female connector
_A
AC Breaker
_A (as short as possible)
_B (as short as possible)
_A (as short as possible)
_B (as short as possible)
Master(Mst) R S
_B
_A
GND
5ISFF1IBTF4NBSU.FUFS
4&5 &4$
L1 L2 L3 N
Slave(Slv)
R S
Slave(Slv) R S
Generator
Pic . CHNT Connection diagram(The pass-through table)
– –
7
_”N” )[
5ISFF1IBTF4NBSU.FUFS 4&5 &4$
CHNT DTSU x/V
3 6 9 10131416171921
L1 L2 L3
24 25
AB RS485
Phase C current =5.002A
Pic . CHINT meter
Phase A current =5.000A Phase B current =5.001A
Solar Panel array Solar Panel array Solar Panel array
Master(Mst) Slave(Slv) Slave(Slv)
VCC_V GND
AC Breaker
L L L N
AC Breaker
L L L N
AC Breaker
L L L N
_B
L1 L2 L3 N load
RS Female connector
_A
AC Breaker
Master(Mst) R S
485_B
485_A
GND
7
_”N” )[
5ISFF1IBTF4NBSU.FUFS 4&5 &4$
L1 L2 L3 N
Black line
White line Black line White line Black line
White line
_A (as short as possible)
_B (as short as possible)
_A (as short as possible)
_B (as short as possible)
L1 L2 L3 N
Slave(Slv)
R S
Slave(Slv) R S
Grid
Pic . CHNT Connection diagram(The pass-through table)
– –
7
_”N” )[
5ISFF1IBTF4NBSU.FUFS 4&5 &4$
CHNT DTSU x/V
3 6 9 10131416171921
L1 L2 L3
24 25
AB RS485
Phase C current =5.002A
Pic . CHINT meter
Phase A current =5.000A Phase B current =5.001A
Solar Panel array Solar Panel array Solar Panel array
Master(Mst) Slave(Slv) Slave(Slv)
VCC_V GND
AC Breaker
L L L N
AC Breaker
L L L N
AC Breaker
L L L N
_B
L1 L2 L3 N load
RS Female connector
_A
AC Breaker
Master(Mst) R S
485_B
485_A
GND
7
_”N” )[
5ISFF1IBTF4NBSU.FUFS 4&5 &4$
L1 L2 L3 N
Black line
White line Black line White line Black line
White line
_A (as short as possible)
_B (as short as possible)
_A (as short as possible)
_B (as short as possible)
L1 L2 L3 N
Slave(Slv)
R S
Slave(Slv) R S
Generator
Pic . CHNT Connection diagram(The pass-through table)
– –
. How to browse the load power of your PV grid-tie plant on monitoring
platform?
If you want to browse load power of the system and how much energy (KWH) does
it export to grid(inverter output power is used to power the load firstly and
then the surplus energy will feed into grid). You also need to connect the
meter according to above diagram. After the connection completed successfully,
the inverter will show the load power on the LCD. But please don’t setup
“Meter ON”. Also, you will be able to browse the load power on the monitoring
platform. The plant setting method as below description. Firstly, go to the
solarman platform(https://pro.solarmanpv.com, this link is for solarman
distributor account; or https://home.solarmanpv.com, this link is for solarman
end user account;) plant home page and click “edit”
Back to Plants list String inverter Solar Sta…
Dashboard Devices Alerts About Authorizations Layout Work Order Plan
Maintenance Record
String inverter Solar Station ID
Partially Offline Edit Tags
No Alerts
Cover
Address Plant Type System Type Phone
YongJiang Road,Beilun,Ning… Residential
Self-consumption
Flow Graph Production Consumption Grid
Production Power . kW 32% Capacity kWp
Consumption Power .kW
Grid Power . kW
Compare
Add
Edit
More
Last update // :: UTC+:
Updated: // ::
/ Sunny m/s :
:
MON
TUE /
WED /
THU /
FRI /
And then choose your system type as “Self-consumption”
Edit Plant
Basic Info System Info
- Address : YongJiang Road, Beilum,NingBo, , China
Yield Info
- Coordinates :
Owner Info
Longitude
`
.
” Latitude
`
. ”
Time Zone : (UTC+:) Beijing,Chongqing,Hong Kong,Urumqi
Creation Time : //
System Info Plant Type :
Residential * Capacity(kWp):
30
System Type : Self-consumption
Azimuth( ): ~
Cancel
Done
Collapse
– –
Secondly, go to plant page, if it shows the PV power, load power and grid power, which means the configuration is correct.
Back to Plants list String inverter Solar Sta…
Dashboard Devices Alerts About Authorizations Layout Work Order Plan
Maintenance Record
String inverter Solar Station ID
Partially Offline Edit Tags
No Alerts
Cover
Address Plant Type System Type Phone
YongJiang Road,Beilun,Ning… Residential
Self-consumption
Flow Graph Production Consumption Grid
Production Power . kW 32% Capacity kWp
Consumption Power .kW
Grid Power . kW
Compare
Add
Edit
More
Last update // :: UTC+:
Updated: // ::
/ Sunny
m/s
:
:
MON
TUE /
WED /
THU /
FRI /
Flow Graph Production Consumption Grid
Production Power . kW 32% Capacity kWp
Grid Power . kW
Consumption Power .kW
– –
. General Operation
During normal operation, the LCD shows the current status of the inverter, including the
current power, total generation, a bar chart of power operation and inverter ID, etc. Press
the Up key and the Down key to see the current DC voltage, DC current, AC voltage, AC
current, inverter radiator temperature, software version number and Wifi connection state
of the inverter.
E-Day
E-Month
LCD main menu
Statistics
E-Year E-History
Test Data
Start
DC input data AC output data
Fault record
ON/OFF
Turn ON Turn OFF
Interface
Setup
System param
Run param
Protect param
Setup
System param
Comm. param
Time Set Language Set Display Set Factory data reset
English polski Brightness Keep
Delay time S Confirm to reset Cancel
Setting Restore
Confirm to restore Cancel
– –
Setup
Running param
ActiveP Q-Mode ReactP PF Fun- ISO Fun RCD SelfCheck Island Meter Limiter Feed- in MPPT Num ARC OF-Derate UF-Uprate PU WGRa WGraStr VRef PowerLim VoltageRT DRM Sunspec OK Cancel
P-P
QP
Q-Q
Back
PFP start
Cut-In Cut-Out P-P PF-PF
QU
stop
Time
RmpTime
PtUsed PF
Curve
PER
OFF
AVG
Exp_Mode
MIN
CT_Ratio MFR FeedIn Shunt
AUTO ACREL
EASTRON
CHNT
ShuntQTY
Generator
G.CT
AUTO
G.MFR
ACREL
G.FeedIn EASTRON
G.Cap
CHNT
OFF SLV MST
CLR ON OFF
ON OFF
HYS ON OFF
V-V P-P
HardLim P_H SoftLim P_S
HVRT LVRT Vstart Vstop
– –
Protect Param
GridStanderd Advanced Back
Setup
INMETRO
EN
EN
IEC
CUSTOM
VDE_
UTE_C
RD
CEI__
G_G
AS(.)
NB/T
MEA
PEA OV-OV
.V
Tov-Tov UV-UV Tuv-Tuv OF-OF
ms .V ms .HZ
Tof-Tof UF-UF Tuf-Tuf Vrc_H
ms .HZ ms
Vrc_L Frc_H
Frc_L
VGrid /V
OVMin
Uov
Comm. param
Address: Meter:Unkonw BaudRate:
– –
. The initial interface
From the initial interface, you can check power, daily generation, gross
generation, invertert ID , model and time.
.Kw
Power: Day : Total : State : Standby
SN-
—
P – Kw .Kw
kWh
MWh
::
ID: PF:.
Flash
Pic . The initial interface
Press UP or Down you can check inverter DC voltage, DC current, AC voltage, AC
current, inverter temperature, software version information.
RUN
Input
PV V : .V I : .A P : .KW PV V : .V I : .A P : .KW
Pic . PV input and DC current information You can check the PV information, the number of strings input, MPPT voltage and MPPT current.
– –
RUN Ua : .V
Grid Ia : .A
Grid Freq : .Hz PF : .
Pic . AC running state information You can check the three phase voltage,
current, and grid frequency.
RUN
Total DC Power: .W
Lcd Inv
Pic . Inverter firmware version
You can check the inverter LCD software Ver and Control Software Version Ver. There are two black spot in the bottom right corner. The first flash means inverter is communicating with LCD. The second flash means LCD is communicating with wifi plug.
1″3″.&53.FUFS
4/
Meter Power:
W
Load Power:
W
Day
Total
ImpEp : .kWh
.kWh
ExpEp : .kWh
.kWh
LoadEp : .kWh
.kWh
Pic . Meter power and load power – –
.. Main Menu There are four submenu in the Main Menu.
MENU
Statistics u
Fault Record ON/OFF Setup
Pic . Main Menu
. Statistics information There are five submenu in the statistics.
MENUStatistics E-Day E-Month E-Year
E-History Test Data
Into each submenu through cursor.
Pic . Statistics
– –
MENUStatisticsE-Day <–>
MWh
Pic . E-Day
MENUStatisticsE-Month – – <>
MWh
Pic . E-Month
MENUStatisticsE-Year <>
KWh
Pic . E-Year
– –
MENUStatisticsE-History <->
KWh
Pic . E-History This information is for technician’s reference.
PV :
PV :
HV : GFD DiL AVL k : : :
–
k :
k : k :
k : vHV
BSn : ofA : ofB : : :
| ofC : |
|---|
| : : : : : : : |
Pic . Test Data
. Fault Record
Only can keep four fault record in the menu include time, customer can deal
with it depends on the error code.
MENUFault Record
Fault :
F– :
History : F– : F– :
F– :
F– :
Pic . Fault Record – –
. ON/OFF setting MENUON/OFF
Turn ON Turn OFF
Pic . ON/OFF setting Into each submenu through cursor.
MENUON/OFFTurn ON
Turn ON
OK
Cancel
Pic . ON set
MENUON/OFFTurn OFF
Turn OFF
OK
Cancel
Pic . OFF set – –
. Parameter setting Setting includes system param, run param, protect param,
comm.. param. All of these information for maintenance reference.
MENUSetup
System Param Run Param Protect Param Comm. Param
.. System Param
Pic . Setting
MENUSetup System Param
Time Set Language Set
Display Set Factory data reset Setting Restore
Pic .. System Param Setting
– –
… Time Set Time Set
— ::
OK
Cancel
… Language Set
Pic . System Param
Lauguage Set
English
Polski
… Display Set
Pic . Lauguage set
Display Set
Brightness Keep Delay time S
OK
Cancel
Pic . Display set – –
… Factory data reset Factory data reset Confirm to reset Cancel
… Setting Restore
Pic . Factory data reset set
Setting Restore
Confirm to restore
Cancel
Pic . Factory data reset set
Warning: Password required– only for access-authorized engineer. Un-authorized
access may avoid the warranty. The initial password is .
– –
.. Run Param
PassWord
Pic . Password
MENUSetupRun Param
ActiveP % QMode OFF
ReactP .%
PF
.
Fun_ISO OFF Fun_RCD OFF
OK
SelfCheck S
Island
OFF
Meter
ON
Limiter
OFF
Feed_In % MPPT Num
Cancel
– –
Name
“DUJWF1 2.PEF 3FBDU1 1′ ‘VO@40 ‘VO@3$% 4FMGDIFDL TMBOE
.FUFS
Description
“EKVTUUIFPVUQVUBDUJWFQPXFSJO .VMUJQMFSFBDUJWFQPXFSDPOUSPMNPEFT
“EKVTUSFBDUJWFQPXFSPVUQVUJO 1PXFS’BUPS OTVMBUJPOSFTJTUBODFEFUFDUJPO
3FTJEVBMDVSSFOUEFUFDUJPO OWFSUFSTTFMGDIFDLUJNF5IFEFGBVMUWBMVFT
“OUJJTMBOEJOHQSPUFDUJPO &OFSHZNFUFS*GJOWFSUFSXJMMDPOOFDUNFUFS
UIFO TFUIFSFUP0/
Range
0”2 1
1’ 1
2 6
1’1&3 _
0/0” 0/0”
T
0/0”
0/0”
‘FFE@*/
*UJTVTFEUPEFQMPZIPXNVDIQPXFSDBOCF GFFEJOUPHSJEXIFOUIFJOWFSUFSXPSLTVOEFS [FSPFYQPSUNPEF ‘PSFYBNQMF
‘FFE@JOPG UIF,8NPEFMBOEMPBEQPXFSJT,8XIJDI NFBOT.BY,8QPXFSDBOCFGFFEJOUPHSJE
BGUFSJOWFSUFSQSPWJEJOH,XUPUIFMPBEGJSTUMZ
Warning: Engineer Only. We will set the param depends on the safety requirements, so customers don’t need to reset it. The password is same as . Running param
– –
MENUSetupRun Param
ARC
OFDerate UFUprate PU WGra WGraStr
OFF
OFF OFF OFF .% .%
Vref
.V
PowerLimit
VoltageRT
DRM
OFF
Sunspec OFF
OK
Cancel
Name
Description
Range
“3$
“SDGBVMUEFUFDUJPOGVODUJPO
0’%FSBUF 6’6QSBUF 16 8(SB 8(SB4US 7SFG 1PXFS-JNJU
“DUJWFQPXFSSFTQPOTFUPPWFSGSFRVFODZ “DUJWFQPXFSSFTQPOTFUPVOEFSGSFRVFODZ
QPXFSSFTQPOTFUPHSJEWPMUBHFEFWJBUJPO “DUJWFQPXFSSBNQSBUF 1OPN4FD
“DUJWFQPXFSSBNQSBUFBUGJSTUTUBSU 1OPN4FD
(SJESFGFSFODFWPMUBHFGPSGVODUJPOTJODMVEJOH 2 6
1’ 1
1 6
FUD )BSETPGUFYQPSUMJNJUDPOUSPM
7PMUBHF35
WPMUBHFSJEFUISPVHIGVODUJPO
%3.
%FNBOE3FTQPOTF.PEFT
4VOTQFD
4VOTQFD’VODUJPO
Pic . Run Param
0/0”$MFBS 1NBY)[ 1NBY)[ 0/0” _ 7 0/0” 0/0” 0/0” 0/0”
– –
MENUSetupRun Param
ARC
OFDerate UFUprate PU WGra Sunspec
OFF
OFF OFF ON .% OFF
Vref
.V
PowerLimit
VoltageRT
DRM
OFF
Sunspec
OFF
OK
Cancel
Voltage Ride Through
HVRT
Vstart Vstop
OFF LVRT
.% Vstart .% Vstop
ZVRT
OFF
.% .% OFF
OK
Cancel
Pic . Voltage Ride Through
– –
… Over-frequency Response
This series inverter provides “over-frequency response” function. Long
pressing the “OFD Derate” to enter the “over-frequency response” setting menu.
MENUSetupRun Param
ARC
OFF
OFDerate ON UFUprate OFF
PU WGra
OFF .%
Sunspec OFF
OK
Vref
.V
PowerLimit
VoltageRT
DRM
OFF
Sunspec OFF
Cancel
Definition of Over-frequency Response Parameters
Parameter
StartPoint StopPoint RecoverPoint
RecoverGradient
Range
45HZ-65HZ 45HZ-65HZ 45HZ-65HZ
0.3%¬300% P/min
Description
The Start frequency value for over-frequency response.
The Stop frequency value for over-frequency response. In hysteresis mode,
power is restored only when it is below this frequency
Ramp rate of power recovery
RecoverDelay ResponseDelay
0-1000s 0-2000S
Time Delay of power recovery in hysteresis mode
Response delay time after entering active power frequency mode
For example, StartPoint: .Hz, StopPoint: .Hz, RecoverPoint: .Hz, when the grid frequency increases beyond StartPoint: .Hz, the inverter will linearly reduce the power output with a gradient of % Pmax/Hz until it reaches StopPoint: .Hz.
OverFrequenceDerate
StartPoint StopPoint RecoverPoint RecoverGradient
RecoverDelay ResponseDelay
Back
.Hz .Hz .Hz .%
S .S
Rated Output Power(kW)
RecoverPoint
StartPoint
Hysteresis mode
StopPoint
. . . . . . . . . . . . . . . . . . . . . Grid Frequency(Hz)
Frq-Watt Mode for Over-frequency Conditions
– –
When the frequency exceeds StopPoint: .Hz, the inverter output should stop (ie W). When the frequency is lower than StopPoint: . Hz, the inverter will linearly increase the power output with a gradient of % Pmax/Hz until it reaches StopPoint: . Hz. In the hysteresis mode, when the frequency is lower than StopPoint: . Hz, the inverter will not increase the power output until it is lower than RecoverPoint: . Hz.
MENUSetupRun Param
ActiveP % QMode QU
ReactP PF
.% .
Fun_ISO ON Fun_RCD ON
OK
SelfCheck S
Island
OFF
Meter
ON
Limiter
OFF
Feed_In % MPPT Num
Cancel
The inverter provides a reactive power regulation function. Tap Reactive Power
Regulation Mode to select proper regulation mode and set the corresponding
parameters.
“OFF” Mode The reactive power regulation function is disabled. The PF is fixed
at +.
ReactiveP Adjust reactive power output in %.
“PF” Mode
The power factor (PF) is fixed and the reactive power is regulated by the
parameter PF. The PF ranges from . leading to . lagging.
·Leading: the inverter is sourcing reactive power to the grid. ·Lagging: the
inverter is injecting reactive power into the grid. “Q(U)” Mode
The reactive power output of the inverter varies in response to the grid
voltage.
“Q(P)” Mode
The reactive power output by the inverter is controlled by the active power of
the inverter.
– –
“Q(U)” Mode
QU Setting
Start
.%
RmpTime s
Curve UrfTime
Stop PtUsed Uref
.% OFF
Back
QU Setting
V
.%
V
.%
V
.%
V
.%
V
.%
V
.%
Back
Q
-.%
Q
.%
Q
.%
Q
.%
Q
.%
Q
.%
Upper Q/Pn lnd
(U,Q)
(U,Q)
(U,Q)
(U,Q)
Grid Voltage
(U,Q)
Lower Q/Pn Cap
(U,Q)
Pic . Reactive Power Regulation Curve in Q(U) Curve
– –
Parameter
Start Stop RMpTime PtUsed Curve Q1 V1 Q2 V2 Q3 V3 Q4 V4 Q5 V5 Q6
V6
Range
0%-130% Rate out power 0%-130% Rate out power 0-1000s 2-6
Description
The QU mode starts when the active power is greater than this value
The QU mode stops when the active power is less than this value Increase or
decrease the time required for the reactive power to reach the specified value
of the curve.
Point number used in QU Curve
-60% -60% Q/Pn 0-110% VRated -60% -60% Q/Pn 0-110% VRated -60% -60% Q/Pn 0-110% VRated -60% -60% Q/Pn 0-110% VRated -60% -60% Q/Pn 0-110% VRated -60% -60% Q/Pn
0-110% VRated
QU Curve
Value of Q/Pn at point (U1,Q1) on the Q(U) mode curve
Grid voltage limit at point (U1,Q1) on the Q(U) mode curve
Value of Q/Pn at point (U2,Q2) on the Q(U) mode curve
Grid voltage limit at point (U2,Q2) on the Q(U) mode curve
Value of Q/Pn at point (U3,Q3) on the Q(U) mode curve Grid voltage limit at
point (U3,Q3) on the Q(U) mode curve
Value of Q/Pn at point (U4,Q4) on the Q(U) mode curve
Grid voltage limit at point (U4,Q4) on the Q(U) mode curve
Value of Q/Pn at point (U5,Q5) on the Q(U) mode curve
Grid voltage limit at point (U5,Q5) on the Q(U) mode curve
Value of Q/Pn at point (U6,Q6) on the Q(U) mode curve
Grid voltage limit at point (U6,Q6) on the Q(U) mode curve
“Q(U)” Mode Parameters Explanation
– –
“Q(P)” Mode
The reactive power output by the inverter is controlled by the active power of the inverter.
Upper Q/Pn lnd
(P,Q)
P(P,Q)
P(P,Q)
P(P,Q)
P/Pn
P(P,Q)
Lower
Q/Pn Cap
P(P,Q)
Pic . Reactive Power Regulation Curve in Q(P) Mode
MENUSetupRun Param
ActiveP % QMode QP
ReactP PF
.% .
Fun_ISO ON Fun_RCD ON
OK
SelfCheck S
Island
OFF
Meter
ON
Limiter
OFF
Feed_In % MPPT Num
Cancel
QP Setting
P
.%
P
.%
P
.%
P
.%
P
.%
P
.%
Back
Q
-.%
Q
.%
Q
.%
Q
.%
Q
.%
Q
.%
– –
Parameter
P1 Q1 P2 Q2 P3 Q3 P4 Q4 P5 Q5 P6 Q6
Range
0%-100% Pn -60% -60% Q/Pn 0%-100% Pn -60% -60% Q/Pn 0%-100% Pn -60% -60% Q/Pn
0%-100% Pn -60% -60% Q/Pn 0%-100% Pn -60% -60% Q/Pn 0%-100% Pn -60% -60% Q/Pn
Descrption
Value of Q/Pn at point (P1,Q1) on the Q(P) mode curve
Reactive power value at point (P1,Q1) on the Q(P) mode curve
Value of Q/Pn at point (P2,Q2) on the Q(P) mode curve Reactive power value at
point (P2,Q2) on the Q(P) mode curve
Value of Q/Pn at point (P3,Q3) on the Q(P) mode curve
Reactive power value at point (P3,Q3) on the Q(P) mode curve
Value of Q/Pn at point (P4,Q4) on the Q(P) mode curve
Reactive power value at point (P4,Q4) on the Q(P) mode curve
Value of Q/Pn at point (P5,Q5) on the Q(P) mode curve
Reactive power value at point (P5,Q5) on the Q(P) mode curve
Value of Q/Pn at point (P6,Q6) on the Q(P) mode curve
Reactive power value at point (P6,Q6) on the Q(P) mode curve
“Q(P)” Mode Parameters Explanation
“PU” Mode
The active power output of the inverter varies in response to the grid voltage
MENUSetupRun Param
ARC
OFDerate UFUprate PU WGra Sunspec
OFF
OFF OFF ON .% OFF
Vref
.V
PowerLimit VoltageRT
DRM
OFF
Sunspec
OFF
OK
Cancel
– –
PU Setting
U
.%
P
U
.%
P
U
.%
P
U
.%
P
RmpTime S
Back
.% .% .% .%
U/Vref
(U,P)
(U,P) (U,P) (U,P)
P/Pn
Pic . Active Power Regulation Curve in PU Curve
Parameter
P1 U1 P2 U2 P3 U3 P4 U4
Range
0%-110% Pn 0% -150% Vref 0%-110% Pn 0% -150% Vref 0%-110% Pn 0% -150% Vref
0%-110% Pn 0% -150% Vref
Description
Value of P/Pn at point (P1,U1) on the PU mode curve
Grid voltage limit at point (P1,U1) on the PU mode curve
Value of P/Pn at point (P2,U2) on the PU mode curve Grid voltage limit at
point (P2,U2) on the PU mode curve
Value of P/Pn at point (P3,U3) on the PU mode curve
Grid voltage limit at point (P3,U3) on the PU mode curve
Value of P/Pn at point (P4,U4) on the PU mode curve
Grid voltage limit at point (P4,U4) on the PU mode curve
“PU” Mode Parameters Explanation
– –
“PF(P)” Mode
PFP Setting
Cut_in
.%
P
.%
P
.%
P
.%
P
.%
P
.%
Back
PFP Setting
P Time
.% s
Cut_out PF PF PF PF PF
.% -. -. -. -. -.
PF
-.
Back
PF lagging
P(P,PF)
P(P,PF)
P(P,PF)
P(P,PF)
P(P,PF)
P/Pn
PF leading
P(P,PF)
Pic . Power factor Regulation Curve in PF(P) Mode
– –
Parameter
P1 PF1 P2 PF2 P3 PF3 P4 PF4 P5 PF5 P6 PF6 RMpTime
Range
0-110% Pn 0.8 leading – 0.8 lagging
0-110% Pn 0.8 leading – 0.8 lagging
0-110% Pn 0.8 leading – 0.8 lagging
0-110% Pn 0.8 leading – 0.8 lagging
0-110% Pn 0.8 leading – 0.8 lagging
0-110% Pn 0.8 leading – 0.8 lagging
0-1000s
Description
Power value at point (PF1,P1) on the PF(P) Curve
PF value at point (PF1,P1) on the PF(P) Curve
Power value at point (PF2,P2) on the PF(P) Curve
PF value at point (P2,PF2) on the PF(P) Curve
Power value at point (P3,PF3) on the PF(P) Curve
PF value at point (P3,PF3) on the PF(P) Curve
Power value at point (P4,PF4) on the PF(P) Curve
PF value at point (P4,PF4) on the PF(P) Curve
Power value at point (P5,PF5) on the PF(P) Curve
PF value at point (P5,PF5) on the PF(P) Curve
Power value at point (P6,PF6) on the PF(P) Curve
PF value at point (P6,PF6) on the PF(P) Curve
The time of the PFF Curve in seconds (time to accomplish a change of 95%).
“PF(P)” Mode Parameters Explanation
– –
.. Protect Param
MENUSetupProtect Param GridStandard Advanced
OK
Cancel
Warning: Engineer only.
Pic . Protect Param
Standard
Brazil EN–PL EN- IEC Custom VDE
OK
Cancel
Standard
VDE
Spain
CEI
G
G
NBT-B
OK
Cancel
– –
Standard Australia-A Australia-B Australia-C New Zealand MEA PEA OK
Standard Norway Switerland R CEI-
Cancel
OK
Cancel
Pic . “Standard”
– VoltageTriping
OV OV OV_
.V .V .V
UV UV UV_
.V .V .V
OK
Tov Tov Tov Tuv Tuv Tuv
Cancel
ms ms ms ms ms ms
– –
– FrequencyTriping
OF OF OF_
.Hz .Hz .Hz
UF UF UF_
.Hz .Hz .Hz
OK
Tof Tof Tof Tuf Tuf Tuf
Cancel
ms ms ms ms ms ms
– Miscellaneous
Vrc_H Vrc_L Frc_H
.V .V .Hz
Frc_L .Hz VGrid /V OVMin OFF
OK
Uov
.%
Cancel
Pic . “Advanced”
.. Comm. Param
MENUSetupComm.Param
WIFI-SET
-SET
Address : Address :
Func :
Baud :
Pic . Communication param
– –
. Repair and Maintenance
String type inverter doesn’t need regular maintenance. However, debris or dust
will affect heat sink’s thermal performance. It is better to clean it with a
soft brush. If the surface is too dirty and affect the reading of LCD and LED
lamp, you can use wet cloth to clean it up.
High Temperature Hazard: When the device is running, the local temperature is
too high and the touch can cause burns. Turn off the inverter and wait for it
cooling, then you can clean and maintain. Safety Hint: No solvent, abrasive
materials or corrosive materials can be used for cleaning any parts of the
inverter.
.Error information and processing
Inverter has been designed in accordance with international grid tied
standards for safety, and electromagnetic compatibility requirements. Before
delivering to the customer the inverter has been subjected to several tests to
ensure its optimal operation and reliability.
. Error code
If there is any failure,the LCD screen will display an alarm message. In this
case, the inverter may stop feeding energy into the grid. The alarm
description and their corresponding alarm messages are listed Table ..
– –
Error code
Description
Ongrid – Three Phase
F
%$JOQVUQPMBSJUZSFWFSTFGBVMU
$IFDLUIF17JOQVUQPMBSJUZ
F
%$JOTVMBUJPOJNQFEBODF QFSNBOFOUGBVMU
$IFDLUIFHSPVOEJOHDBCMFPGJOWFSUFS
F
%$MFBLBHFDVSSFOUGBVMU
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F
(SPVOEGBVMU(‘%*
$IFDLUIFTPMBSQBOFMPVUQVUDPOOFDUJPO
F
3FBEUIFNFNPSZFSSPS
F
8SJUFUIFNFNPSZFSSPS
‘BJMVSFJOSFBEJOHNFNPSZ &&130.
3FTUBSUUIFJOWFSUFSJGUIF GBVMUTUJMMFYJTUT
DPOUBDUZPVSJOTUBMMFSPS%FZFTFSWJDF ‘BJMVSFJOXSJUJOHNFNPSZ &&130.
3FTUBSUUIFJOWFSUFSJGUIF GBVMUTUJMMFYJTUT
DPOUBDUZPVSJOTUBMMFSPS%FZFTFSWJDF
F
(‘%*CMPXOGVTF
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F
(‘%*HSPVOEJOHUPVDIGBJMVSF
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F09
IGBT damaged by excessive drop voltage
Hardly appear the code. Never ever happened so far.
F
“VYJMJBSZTXJUDIQPXFSTVQQMZ GBJMVSF
*UUFMMTUIF%$7JTOPUFYJTUFE 3FTUBSUUIFJOWFSUFS
JGUIFGBVMUTUJMMFYJTUT
QMFBTFDPOUBDU ZPVSJOTUBMMFS
F
“$NBJODPOUBDUPSFSSPST
F
“$BVYJMJBSZDPOUBDUPSFSSPST
F
SFTFSWFE
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
-PTTPGPOFQIBTFPS”$WPMUBHFEFUFDUJPOQBSUGBJMVSFPS SFMBZTOPUDMPTFE
3FTUBSUUIFJOWFSUFS
JGUIFFSSPSTUJMMFYJTUT
QMFBTFDPOUBDUZPVS JOTUBMMFSPS%FZFTFSWJDF
F
%$GJSNXBSFPWFSDVSSFOU
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F
“$GJSNXBSFPWFSDVSSFOU
5IFJOUFSOBM”$TFOTPSPSEFUFDUJPODJSDVJUPODPOUSPMCPBSE PSDPOOFDUJPOXJSFNBZMPPTF
3FTUBSUUIFJOWFSUFS
JGUIFFSSPSTUJMMFYJTUT
QMFBTFDPOUBDU ZPVSJOTUBMMFSPS%FZFTFSWJDF
5IJTGBVMUNFBOTUIFBWFSBHFMFBLBHFDVSSFOUJTPWFSN”
$IFDLXIFUIFS%$QPXFSTVQQMZPSTPMBSQBOFMTJTPL
UIFO
F
(‘$* 3$%
“DMFBLBHFDVSSFOU GBVMU
DIFDL5FTUEBUBEJ-WBMVFJTBCPVU5IFODIFDLUIF MFBLBHFDVSSFOUTFOTPSPSDJSDVJU
UIFGPMMPXJOHQJDUVSF
$IFDLJOHUFTUEBUBOFFETVTJOHCJH-$%
3FTUBSUUIFJOWFSUFS
JGUIFFSSPSTUJMMFYJTUT
QMFBTFDPOUBDUZPVS
JOTUBMMFSPS%FZFTFSWJDF
F
5ISFFQIBTFDVSSFOU
PWFSDVSSFOUGBVMU
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
$IFDL”$TFOTPSPSEFUFDUJPODJSDVJUPODPOUSPMCPBSEPS
F
“$PWFSDVSSFOUGBVMUPGIBSEXBSF
DPOOFDUJPOXJSF 3FTUBSUUIFJOWFSUFSPSGBDUPSZSFTFU
JGUIFFSSPSTUJMMFYJTUT
QMFBTFDPOUBDUZPVSJOTUBMMFSPS%FZFTFSWJDF
F
“MMIBSEXBSFGBJMVSFTZOUIFTJT
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F
%$PWFSDVSSFOUGBVMUPGUIF IBSEXBSF
$IFDLXIFUIFSTPMBSQBOFMPVUQVUDVSSFOUJTXJUIJOUIF BMMPXFESBOHF
$IFDL%$DVSSFOUTFOTPSBOEJUTEFUFDUJPODJSDVJU
$IFDLJGUIFJOWFSUFS’8WFSTJPOJTTVJUBCMFGPSUIFIBSEXBSF 3FTUBSUUIFJOWFSUFS
JGUIFFSSPSTUJMMFYJTUT
QMFBTFDPOUBDUZPVS JOTUBMMFSPS%FZFTFSWJDF
– –
Error code
Description
Ongrid – Three Phase
F
%$MFBLBHFGMPXGBVMU
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F
$SBTITUPQ JGUIFSFJTBTUPQ CVUUPO
$POUBDUZPVSJOTUBMMFSGPSIFMQ
5IJTGBVMUNFBOTUIFMFBLBHFDVSSFOUJTBCPWFN”TVEEFOMZ
$IFDLXIFUIFS%$QPXFSTVQQMZPSTPMBSQBOFMTJTPL
UIFO
F
“$MFBLBHFDVSSFOUJTUSBOTJFOU PWFSDVSSFOU
DIFDL5FTUEBUBEJ-WBMVFJTBCPVU5IFODIFDLUIF MFBLBHFDVSSFOUTFOTPSPSDJSDVJU$IFDLUFTUEBUBOFFET VTJOHCJH-$%
3FTUBSUUIFJOWFSUFS
JGUIFGBVMUTUJMMFYJTUT
DPOUBDUZPVSJOTUBMMFS
PS%FZFTFSWJDF
$IFDL7QFSFTJTUBODFPONBJOCPBSEPSEFUFDUJPOPODPOUSPM
CPBSE$IFDL17QBOFMTJT0,.BOZUJNFTUIJTJTTVFJTUIF17
QSPCMFN
$IFDLXIFUIFSUIF17QBOFM BMVNJOVNGSBNF
JTHSPVOEFE
F
%$JOTVMBUJPOJNQFEBODFGBJMVSF
XFMMBOEJOWFSUFSJTHSPVOEFEXFMM0QFOUIFDPWFSPGJOWFSUFS BOEUIFODIFDLUIFJOTJEFHSPVOEDBCMFJTGJYFEXFMMPOUIFTIFMM
$IFDLJGUIF”$%$DBCMF
UFSNJOBMCMPDLBSFTIPSUFEUPHSPVOE
PSUIFJOTVMBUJPOJTEBNBHFE
3FTUBSUUIFJOWFSUFS
JGUIFGBVMUTUJMMFYJTUT
DPOUBDUZPVSJOTUBMMFS
PS%FZFTFSWJDF
F
%$GFFECBDLGBVMU
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
$IFDLXIFUIFSUIF#64/DBCMFPSESJWFSCPBSEQPXFSTVQQMZ
F
5IF%$CVTCBSJTVOCBMBODFE
DBCMFJTMPPTF 3FTUBSUUIFJOWFSUFS
JGUIFGBVMUTUJMMFYJTUT
DPOUBDUZPVS
JOTUBMMFSPS%FZFTFSWJDF
F
%$FOEJOTVMBUJPOFSSPS
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F
*OWFSUFS%$IJHIGBVMU
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F
“$MPBETXJUDIGBJMVSF
F
“$NBJODPOUBDUPSGBJMVSF
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS $IFDLSFMBZTBOE”$WPMUBHFPGSFMBZT
$IFDLSFMBZTESJWFSDJSDVJU$IFDLJGUIFTPGUXBSFJTOPUTVJUBCMF GPSUIJTJOWFSUFS
0MEJOWFSUFSOPUIBWFSFMBZTEFUFDUJPO GVODUJPO
3FTUBSUUIFJOWFSUFS
JGUIFGBVMUTUJMMFYJTUT
DPOUBDUZPVS JOTUBMMFSPS%FZFTFSWJDF
F
3FMBZPQFODJSDVJUGBVMU
“UMFBTUPOF3FMBZDBOUCFDMPTFE$IFDLSFMBZTBOEJUTESJWFS TJHOBM
0MEJOWFSUFSOPUIBWFSFMBZTEFUFDUJPOGVODUJPO
3FTUBSUUIFJOWFSUFS
JGUIFGBVMUTUJMMFYJTUT
DPOUBDUZPVS JOTUBMMFSPS%FZFTFSWJDF
F
*OWFSUFSEDIJHIGBVMU
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F
“$PWFSDVSSFOU
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F
“$DVSSFOUPWFSMPBE
F
/P”$HSJE
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
$IFDL”$HSJEWPMUBHF$IFDL”$WPMUBHFEFUFDUJPODJSDVJU
$IFDLJGUIF”$DPOOFDUPSJOHPPEDPOEJUJPO$IFDLXIFUIFS UIF”$HSJEJTOPSNBMJOWPMUBHF
3FTUBSUUIFJOWFSUFS
JGUIFGBVMUTUJMMFYJTUT
DPOUBDUZPVS JOTUBMMFSPS%FZFTFSWJDF
F
“$HSJEQIBTFFSSPS
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F
“$UISFFQIBTFWPMUBHFVOCBMBODF GBJMVSF
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
F
“$UISFFQIBTFDVSSFOUVOCBMBODF GBJMVSF
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
– –
Error code
Description
F
“$PWFSDVSSFOU POFDZDMF
F
%$PWFSDVSSFOU
F
“$-JOF8
6PWFSWPMUBHF
F
“$-JOF8
6MPXWPMUBHF
F
“$-JOF7
8PWFSWPMUBHF
F
“$-JOF7
8MPXWPMUBHF
F
“$-JOF6
7PWFSWPMUBHF
F
“$-JOF6
7MPXWPMUBHF
F
“$0WFSGSFRVFODZ
F
“$MPXFSGSFRVFODZ
F
6QIBTFHSJEDVSSFOU%$ DPNQPOFOUPWFSDVSSFOU
F
7QIBTFHSJEDVSSFOU%$ DPNQPOFOUPWFSDVSSFOU
F
8QIBTFHSJEDVSSFOU%$ DPNQPOFOUPWFSDVSSFOU
F
“$JOEVDUPS”
QIBTFDVSSFOU %$DVSSFOUIJHI
F
“$JOEVDUPS#
QIBTFDVSSFOU %$DVSSFOUIJHI
F
“$JOEVDUPS$
QIBTFDVSSFOU %$DVSSFOUIJHI
F
%$CVTCBSWPMUBHFJTUPPIJHI
F
%$CVTCBSWPMUBHFJTUPPMPX
F
“$SFWFSTFJSSJHBUJPO
F
“$HSJE6PWFSDVSSFOU
Ongrid – Three Phase
$IFDL”$DVSSFOUTFOTPSBOEJUTDJSDVJU 3FTUBSUUIFJOWFSUFS
JGUIFGBVMUTUJMMFYJTUT
DPOUBDUZPVS JOTUBMMFSPS%FZFTFSWJDF )BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
$IFDLUIF”$WPMUBHFQSPUFDUJPOTFUUJOH”OE$IFDLJGUIF”$
DBCMFJTUPPUIJO$IFDLUIFWPMUBHFEJGGFSFODFCFUXFFO-$%BOE NFUFS
$IFDLUIF”$WPMUBHFQSPUFDUJPOTFUUJOH$IFDLUIFWPMUBHF
EJGGFSFODFCFUXFFO-$%BOENFUFS”MTPOFFEUPDIFDLXIFUIFS
“$DBCMFTBSFBMMGJSNMZBOEDPSSFDUMZDPOOFDUFE
$IFDLUIF”$WPMUBHFQSPUFDUJPOTFUUJOH”OE$IFDLJGUIF”$
DBCMFJTUPPUIJO$IFDLUIFWPMUBHFEJGGFSFODFCFUXFFO-$%BOE NFUFS
$IFDLUIF”$WPMUBHFQSPUFDUJPOTFUUJOH$IFDLUIFWPMUBHF
EJGGFSFODFCFUXFFO-$%BOENFUFS”MTPOFFEUPDIFDLXIFUIFS
“$DBCMFTBSFBMMGJSNMZBOEDPSSFDUMZDPOOFDUFE
$IFDLUIF”$WPMUBHFQSPUFDUJPOTFUUJOH”OE$IFDLJGUIF”$
DBCMFJTUPPUIJO$IFDLUIFWPMUBHFEJGGFSFODFCFUXFFO-$%BOE NFUFS
$IFDLUIF”$WPMUBHFQSPUFDUJPOTFUUJOH $IFDLUIFGSFRVFODZQSPUFDUJPOTFUUJOH
$IFDLUIFGSFRVFODZQSPUFDUJPOTFUUJOH )BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
$IFDL17WPMUBHFBOE6CVTWPMUBHFBOEJUTEFUFDUJPODJSDVJU
GUIF17JOQVUWPMUBHFFYDFFETUIFMJNJU
QMFBTFSFEVDFUIF OVNCFSPGTPMBSQBOFMTJOTFSJFT ‘PS6CVTWPMUBHF
QMFBTFDIFDLUIF-$%EJTQMBZ UUFMMTUIF17JOQVUWPMUBHFJTMPXBOEJUBMXBZTIBQQFOTJOUIF
FBSMZNPSOJOH $IFDL17WPMUBHFBOE6CVTWPMUBHF8IFOJOWFSUFSJTSVOOJOH
UIFOTIPXJOH’
NBZCF-PTTPGESJWFSPSOFFEVQEBUF GJSNXBSF 3FTUBSUUIFJOWFSUFS
JGUIFGBVMUTUJMMFYJTUT
DPOUBDUZPVS JOTUBMMFSPS%FZFTFSWJDF “$SFWFSTFJSSJHBUJPO
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
– –
Error code
Description
F
“$HSJE7PWFSDVSSFOU
F
“$HSJE8PWFSDVSSFOU
F
3FBDUPS”QIBTFPWFSDVSSFOU
F
3FBDUPS#QIBTFPWFSDVSSFOU
F
“3$GBVMU
Ongrid – Three Phase
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
)BSEMZBQQFBSUIFDPEF/FWFSFWFSIBQQFOFETPGBS
$IFDL17NPEVMFDBCMFDPOOFDUJPOBOEDMFBSUIFGBVMU 4FFLIFMQGSPNVT
JGDBOOPUHPCBDLUPOPSNBMTUBUF
$IFDLUFNQFSBUVSFTFOTPS$IFDLJGGJSNXBSFJTTVJUBCMFGPS
F
*(#5IFBUTJOLIJHIUFNQFSBUVSF
UIFIBSEXBSF$IFDLJGUIFJOWFSUFSJTJUTSJHIUNPEFM 3FTUBSUUIFJOWFSUFS
JGUIFGBVMUTUJMMFYJTUT
DPOUBDUZPVS
JOTUBMMFS
Table. Error codes and their solutions
Safety Hint: If your string inverter has any of the fault information shown in Table -, and when you reset the machine and still don’t solve the problem, please contact our distributor and provide the below details:
. Serial number of the inverter; . The distributor/dealer of the inverter(if available); . Installation date; . The discription of problem(include LCD’error code and LED starus indicator lights); . Your contact details.
– –
.Specification
Model
Input Side Max.DC Power(kW) Max.DC Input Voltage(V) Start-up DC Input
Voltage(V) MPPT Operating Range(V)
Rated DC input voltage(V) MPPT Full Power Voltage Range(V) Max.DC Input
Current(A) Max. Short Circuit Current (A) Number of MPPT/Strings per MPPT
SUN-K -G
kW
SUN-K SUN-K SUN-K SUN-K SUN-K
-G
-G
-G
-G
-G
.kW
kW
kW
kW
V
V
V-V
V
V-V
A+A+A+A+A+A
A+A+A+A+A+A
/+++++
kW
MAX inverter backfeed current (A)
Output Side
Rated Output Power(kW)
kW
kW
kW
kW
kW kW
Max.Active Power(kW)
kW
.kW
kW
kW
kW kW
Rated AC Grid Voltage(V)
L/N/PE /V /V
AC Grid Voltage Range(V)
.Un-.Un (this may vary with grid standards)
Rated Grid Frequency(Hz)
/ (Optional)
Operating Phase
Three phase
Rated AC Grid Output Current(A) ./.A ./.A ./.A ./.A ./.A ./.A
Max.AC Output Current(A)
./.A /.A ./.A /.A ./.A ./.A
Maximum output fault current (a.c. A, peak ) Maximum output overcurrent protection (a.c. A,peak)
.A .A
.A .A
.A .A
.A .A
.A .A
.A .A
Output Power Factor
. leading to . lagging
Grid Current THD
<%
DC Injection Current
<.%
Grid Frequency Range
– or – (Optional)
Efficiency
Max.Efficiency
.%
.%
Euro Efficiency
.%
MPPT Efficiency
%
Surge Protection
DC Type II / AC Type II
General Data
Cabinet Size(WHD) [mm]
××. (Excluding connectors and brackets)
Weight(kg)
Topology
Transformerless
Internal consumption
<W (Night)
Operating temperature
– to +,> derating
Ingress protection
IP
Noise Emission(Typical)
dB
Type Of Cooling
Smart cooling
Permissible Altitude (m)
m
Warranty [year]
Standard years, extended warranty
Grid Connection Standard
Operation surrounding humidity Safety EMC / Standard
IEC , IEC , CEI -, CEI -, EN , NRS , RD , UNE , OVE-Richtlinie R, G, VDE-AR-N
, VDE-AR-N
-% IEC/EN –///, IEC/EN -, IEC/EN –
– –
General Data Display Interface Protective Class Over Voltage Category Inverter
Topology
Pollution degree
LCD × RS/RS/Wifi/LAN
Class I III (AC), II (DC) Non-is olated PD(Inside), PD(Outside)
12. EU Declaraon of Conformity
within the scope of the EU directives · Electromagnetic compatibility //EU
(EMC) · Low Voltage Directive //EU (LVD) · Restriction of the use of certain
hazardous substances //EU(RoHS)
NINGBO DEYE INVERTER TECHNOLOGY CO.,LTD confirms herewith that the products described in this document are in compliance with the fundamental requirements and other relevant provisions of the above mentioned directives. The entire EU Declaration of Conformity and certificate can be found at https://www.deyeinverter.com/download/#string-inverter.
– –
230927011 www.deyeinverter.com
EU Declaration of Conformity
Product: Grid-connected PV Inverter Models: SUN-70K-G03;SUN-75K-G03;SUN-
80K-G03;
SUN-90K-G03;SUN-100K-G03;SUN-110K-G03; Name and address of the manufacturer:
Ningbo Deye Inverter Technology Co., Ltd. No. 26 South YongJiang Road, Daqi,
Beilun, NingBo, China
This declaration of conformity is issued under the sole responsibility of the manufacturer. Also this product is under manufacturer’s warranty. This declaration of conformity is not valid any longer: if the product is modified, supplemented or changed in any other way, as well as in case the product is used or installed improperly.
The object of the declaration described above is in conformity with the relevant Union harmonization legislation: The Low Voltage Directive (LVD) 2014/35/EU;the Electromagnetic Compatibility (EMC) Directive 2014/30/EU;the restriction of the use of certain hazardous substances (RoHS) Directive 2011/65/EU.
References to the relevant harmonized standards used or references to the other technical specifications in relation to which conformity is declared:
LVD:
EN 62109-1:2010
EN 62109-2:2011
EMC:
EN IEC 61000-6-2:2019
EN IEC 61000-6-4:2019
EN IEC 61000-3-11:2019
EN IEC 61000-3-12:2011
Nom et Titre / Name and Title:
Au nom de / On behalf of: Date / Date (yyyy-mm-dd): A / Place
Bard Dai Senior Standard and Certification Engineer
Ningbo Deye Inverter Technology Co., Ltd. 2023-09-27 Ningbo, China
EU DoC v1
Ningbo Deye Inverter Technology Co., Ltd. No. 26 South YongJiang Road, Daqi, Beilun, NingBo, China
– –
— Ver: .
Add. : No. South YongJiang Road, Daqi, Beilun, NingBo, China. Tel. : + () Fax. : + () E-mail. : service@deye.com.cn Web. : www.deyeinverter.com
References
- マックスサーバ... CGI、PHP、ASP、フロントページ対応...安心と快適のウェブホスティング！
- Solar Grid-Tie Inverter Manufacturers, PV On-Grid Inverter | Deye
- home.solarmanpv.com
- pro.solarmanpv.com