BEB Electronics CKWENC1 TWS Earbuds User Manual

BEB Electronics CKWENC1 TWS Earbuds

Package list

• Charging case: 1PCS
• USB cable: 1PCS
• User Manual: 1PCS
• Packing box: 1PCS
• Wearing schematic: 1PCS

Product specifications

• Power supply: input DC 5v1A / output 5v1A
• Battery capacity: headset 30mAh / charging box 200mah
• Working time: the headset can be used for about 4 hours at a time, and the charging box can be charged for about 2 times
• Charging time: 1.5 hour
• Support protocol: HSP / HFP / A2DP / AVRCP
• Frequency response: 20-20000hz
• Impedance: 32 Ω

_ Remarks: _For the first use, it is recommended to charge the product for 30 minutes.

Products use

Bluetooth pairing

• The two headphones are picked up from the charging box at the same time. The headphones automatically turn on to indicate that the red and blue lights will flash slowly alternately. About 3 seconds later, the headphones will flash alternately.
• Find the corresponding Bluetooth name “WY-X60” in the Bluetooth list of the mobile phone, click
• Connect to wait for pairing, and the voice prompts that the connection is successful for about 3 seconds
• When the headset is used for the same mobile phone again, it will automatically press the last paired connection
• Use other mobile phones, repeat the above operations.

State of charge

• The red light is always on when the charging box is charging, and the red light is always off when it is full
• When the charging box is charging the headset, the red light of the charging box is always on, the red light of the headset is on, and the lights of the headset and the charging box are off when the headset is full.

Call function

Touch the headset function key for about 5 seconds, the red light of the headset flashes 3 times and the voice prompts “power off” the headset turns off. If the headset is not connected to an electronic device, it will turn off automatically after 5 minutes.

Call

• When the headset is turned on and connected to the mobile phone, you can receive and make calls
• When calling, voice prompts the calling number, touch the function key of single headset to answer the call, and touch the function key for 2 seconds to reject the call.
• In the phone, a single touch of the function key will hang up the phone and return to its previous state. During the phone call, you can adjust the call volume through the mobile phone.

Voice assistant

• Touch the left ear or right ear function key for about 2 second, and hear the prompt tone to release the hand and wake up“ Sir ”i function

Listen to music

• The headset is connected to the phone when it is turned on. You can use the headset to listen to music.
• In the process of music, press the headset function key briefly to pause the music, and press again to continue playing the music.
• Double click the right ear function key to play the next music, double click the left ear function key to play the previous music.

Precautions

1. The earphones should be stored in a dry and ventilated environment. Keep it away from oil, water, steam,moisture and dust to avoid affecting product performance.
2. Do not clean this product with any detergent containing chemical element or other liquid.
3. Please use earphones according to the correct specifications, Pay attention to the influence of the environment on earphones. It is recommended that the distance between the mobile phone and earphones be within 10 meters to ensure a smooth connection.
4. If the earphones failed to connect or with poor communication or other problems, please do not disassemble earphones body and its accessories by yourself, otherwise you will lose the right to warranty.
5. Please use the standard car charger or the charger specified by the company to charge the eraphones.
6. To ensure normal use, Please make sure the earphones are fully charged.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet the general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>