Breville The Smart Fryer BDF500UK Deep Fryer Instruction Booklet

The Smart Fryer

WE RECOMMEND SAFETY FIRST

At Sage™ by Heston Blumenthal® we are very safety conscious. We design and manufacture appliances with your safety foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE

• Before using for the first time please ensure that your electricity supply is the same as shown on the rating label on the underside of the appliance. If you have any concerns please contact your local electricity company.

• Your Sage™ by Heston Blumenthal® appliance includes a BS 13 amp molded mains plug on the supply cord.

• Should you need to change this plug, please complete the rewiring as follows ( after safe disposal of the molded plug).

• Please note that a cut off plug inserted into a socket is a serious danger risk

• Wires are colored as follows: – Blue= Neutral – Brown = Live – Green & Yellow= Earth

• As the colors of the wire may not correspond with the colored markings which identify the terminals in your plug, please refer to the following: – The Blue wire must be connected to the terminal which is marked ‘N’.
  – The Brown wire must be connected to the terminal which is marked with the letter ‘L’.
  – The Green & Yellow wire must be connected to the terminal which is marked with the letter E or the earth symbol~- . Please note that if a 13 amp plug is used, a 13 amp fuse should be used.

• Take care when opening the lid. This product generate heat and steam at high temperatures, which will escape immediately when the lid is opened. Avoid touching hot surfaces.

• Do not place anything on top of the deep fryer when the lid is closed, when in use and when stored.

• Always switch the deep fryer off at the power outlet, then unplug and allow to cool, if appliance is not in use, before cleaning, before attempting to move the appliance, disassembling, assembling and when storing the appliance.

• Keep the appliance clean. Follow the cleaning instructions provided in this book.

•  Do not immerse the deep fryer control panel, element or cord in water or any other liquid.

IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES

• Fully unwind the power cord before use.

• Connect only to 230V power outlet.

• Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.

• To protect against electric shock do not immerse the power cord, power plug or appliance in water or any other liquid.

• This appliance can be used by children aged 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and they understand the hazards involved.

• Cleaning and user maintenance should not be made by children unless they are aged 8 years and above and are supervised.

• Keep appliance and its cord out of reach from children aged less than 8 years.

• Before cleaning, always turn the appliance to the OFF position, switch off at the power outlet, unplug at the power outlet and remove the power cord, if detachable, from the appliance and allow all parts to cool.

• The appliance is not intended to be operated by means of an external timer or a separate remote control system.

• Regularly inspect the supply cord, plug and actual appliance for any damage.

• If found damaged in any way or maintenance other than cleaning is required, immediately cease use of the appliance and contact Sage Customer Service on 0808 178 1650.
  IMPORTANT: Fully unwind the cord before use. Ensure appliance is fully cooled before storing power cord inside the control box

• Do not place this appliance on or near a heat source, such as hot plate, oven or heaters.

• Position the appliance at a minimum distance of 20cm away from walls, curtains and other heat or steam sensitive materials and provide adequate space above and on all sides for air circulation.

The symbol shown indicates that this appliance should not be disposed of in normal household waste. It should be taken to a local authority waste collection center designated for this purpose or to a dealer providing this service. For more information, please contact your local council office.

GETTING TO KNOW YOUR NEW APPLIANCE

A.LCD display
Indicates time, temperature plus pre- programmed cooking functions for your favourite dishes.
B. Mesh filter
Filter to minimize cooking odours
C. Cord storage
D.Cool Zone technology
Debris falls into cooler oil, preventing excess burning and extending oil life.
E. Cool touch handles
F. Large viewing window
G. Large 4 litre capacity
Easy to disassemble and clean. 1-1.2kg recommended cooking capacity.
H. Stainless steel exterior
High quality stainless steel cooking surface. Ideal for the professional cook.
I. Non-skid feet
J. Frying basket with fold down handle
Handle folds inside basket for easy storage. 
K. Powerful 3000 watt removable element

COOKING WITH YOUR NEW APPLIANCE

OPERATING YOUR NEW APPLIANCE

STEP l: Remove lid from the deep fryer by grasping the handle on top and lift off.
STEP 2: The wire frying basket has a hinged handle for compact storage. Remove the basket from the deep fryer. Extend and lock the basket handle into position by squeezing the two handle prongs together, pull back and lock behind the two wire supports extending from edge of basket.
STEP 3: Lift the control panel with attached element upwards and away from the deep fryer.
STEP 4: Remove the inner frying bowl by grasping the rim and lifting upwards.
STEP 5: To reassemble the deep fryer, reverse steps 1-4.

WARNING: When assembling your deep fryer for use, please ensure the narrow tongues in the control panel are inserted into the corresponding grooves of the deep fryer body. The deep fryer will not operate unless correctly  assembled.

BEFORE FIRST USE

Remove any promotional materials and packaging materials before use. Wash the lid, removable inner bowl, stainless steel outer body and wire frying basket in hot soapy water, rinse and dry thoroughly. Wipe the element with a soft, damp cloth and dry thoroughly. Reassemble and ensure the bowl is completely free of water before adding any oil.

1. Place the deep fryer on a dry, level surface. Ensure the deep fryer is not too close to the edge of the bench top, and that the power cord or basket handle does not extend over the edge.

2. Remove the frying basket from the deep fryer and add oil to the bowl. Do not add less than the minimum level mark (2.5 litres) or exceed the maximum level mark (4 litres).
   IMPORTANT: NEVER exceed the maximum level mark with oil (maximum is 4 litres). This product must be filled with oil to the exact marked level. The product will be severely damaged if heated without oil in the frying bowl.

3. Replace the lid.

4. Plug in the power cord. Ensure cord is fully extended. Switch on at power outlet and the deep fryer will beep once for self checking, the display panel will illuminate with white background light. The deep fryer enters COOK mode

5. To change temperature format, press and hold the SCROLL/SELECT knob for three seconds. If the temperature format is set to Celsius, it will change to Fahrenheit after pressing the SCROLL/SELECT knob for three seconds. Change the format one time per command. To change the format again, release the knob, and again press and hold the SCROLL/SELECT knob for three seconds.

NOTE: When the deep fryer is switched off a t the power outlet and then switched back on, the cooking temperature format display will default to the last selected format, Celsius or Fahrenheit.

STAND BY MODE

When the deep fryer remains inactive for 10 minutes, it will enter stand by mode. The white backlight will turn off and STANDBY will display. The fryer will come out of stand by mode by pushing any button or turning the SCROLL/SELECT knob and then is ready to start a cooking operation

COOKING WITH YOUR NEW APPLIANCE

COOK MODE

When the unit is turned on the first selection available is cooking mode.
**The display panel options will be:

The default cooking mode will be
**

Selecting a different cooking mode will change the time and temperature settings.
As each mode is selected, the times and temperatures will update to show the default time and temperature for each menu item.
The time and temperature in every mode can be adjusted.
Turn the knob clockwise to scroll down and anticlockwise to scroll up. Push the SCROLL/SELECT knob to select a mode and to move on to the next setting.

FRESH/FROZEN Setting

For CHIPS, FISH, NUGGETS, CALAMARI, the next setting will be FRESH or FROZEN.
Highlight the desired option. The selected option will display and the unselected option will disappear. The FRESH/FROZEN setting will automatically adjust the time and temperature.

Time Setting

If cooking time is to be adjusted for a selected cooking mode, push the SCROLL/SELECT knob to move to the time setting. Then turn the knob to adjust to the time desired. Initially the time will be displayed in
Minutes and Seconds and will be adjusted in 30 second increments. Once the time reaches 9 minutes 30 seconds, the time will show in minutes only (the display will read :10 MIN at 10 minutes). At this stage time will change in 1 minute increments.
After the cooking mode has been selected, the program will move onto the next setting. To get back to the mode menu, the SCROLL/SELECT knob must be pushed to cycle through the other settings until the program returns to the mode menu.

Temperature Setting

If temperature is to be adjusted for a selected cooking mode, push the SCROLL/SELECT knob to move to the temperature setting. Then turn the knob to increase or decrease the temperature.
Temperature can be adjusted in 5 degree increments for both Celsius and Fahrenheit.

START/CANCEL BUTTON

Press the START/CANCEL button to confirm the chosen settings. When START/CANCEL is pushed, the elements will turn on, the display will turn orange, HEATING will display and the actual temperature of the oil will show. Pressing this button again will cancel any operation and turn off the elements. The HEATING display will turn on whenever the elements are turned on.

Ready for Frying

Once the oil has been heated to the set temperature the HEATING display will turn off. Time, Temperature, the selected cooking mode, PRESS TIMER and FRESH or FROZEN will display. Place the basket with food into the oil. Push the TIMER button to start the timer. PRESS TIMER display will disappear.

Completed Frying

When the timer has finished counting down the fryer will beep. PRESS TIMER will display. Push the TIMER button to reset for cooking or START/CANCEL to turn off the elements.

Note on adjusting temperature or time during cooking

The set temperature can be adjusted during the heating process. Press the SCROLL/ SELECT knob so that the arrow indicates temperature. Turn the SCROLL/SELECT knob and the display will change from the actual temperature of the oil to the set temperature. Turn the knob to adjust the temperature and then press to confirm the new temperature.
The set time can be adjusted during cooking operation. Press the SCROLL/SELECT knob so the arrow indicates time. Turn the knob to adjust the time. Press the SCROLL/SELECT knob to confirm the new time.

TIMER BUTTON

After the oil is heated, press the TIMER button to start the timer. Once the timer has finished counting down, the alarm will sound. Push the TIMER button to stop the alarm.
When the timer is set but not started, PRESS TIMER will display. As soon as the TIMER button is pushed, the PRESS TIMER graphic will disappear.

Twice Fried Chips

When TWICE FRIED CHIPS mode is selected and confirmed by pressing the SCROLL/SELECT knob, 1ST FRY/2ND FRY displays.

1. Select 1ST FRY by highlighting and pressing SCROLL/SELECT knob to confirm. 1ST FRY fl.ashes to indicate it is the selected option. Once the selection has been confirmed, the unselected option display turns off. After TWICE FRIED CHIPS and 1ST FRY have been selected, the fryer will automatically set the time and temperature.
   NOTE: For TWICE FRIED CHIPS, FRESH is the only available option as frozen chips have been precooked.

2. Start the heating process by pushing the START/CANCEL button. The display will turn orange to indicate heating. TWICE FRIED CHIPS, FRESH, 1ST FRY, HEATING and the actual temperature of the oil will be displayed. The deep fryer will now preheat the oil. Once the deep fryer has reached the correct temperature, the deep fryer will beep once to indicate it is ready to cook. PRESS TIMER will display.

3. Lower the basket of fresh chips into the oil and press the TIMER button. When the TIMER button is pressed, the timer will start to count down, and the cooking process begins.
   NOTE: When cooking chips using the Twice Fried method, it is not recommended to cook with the lid on due to the possible build up of excess condensation.

4. When the timer finishes counting down, the alarm will sound to signal the end of the cooking cycle. PRESS TIMER, TWICE FRIED CHIPS, 1ST FRY and FRESH, the time and temperature will be displayed.

5. Push the TIMER button to stop the alarm and raise the basket. The deep fryer will automatically begin to reheat. Once the deep fryer has reached the correct temperature, it is ready to proceed.

_ NOTE:
In TWICE FRIED CHIPS mode it is possible to adjust the timer and temperature once the timer has started but it is not possible to switch between 1ST FRY and 2ND FRY
At this point, the fryer is able to proceed to either the 2ND FRY or to another 1ST FRY of a second batch of chips, depending on the total quantity to be fried. TWICE FRIED CHIPS, FRESH, 1ST FRY, PRESS TIMER, the time and cooking temperature display.
NOTE:
If a second batch of chips is to be cooked, we recommend to 1ST FRY both batches and then proceed to the 2ND FRY for both batches. This process means less heating and cooling of oil, providing better results and is more time efficient. _

Proceeding to 2ND FRY

1. Empty the contents of the basket onto a plate lined with paper towel to cool slightly.
2. Push the SCROLL/SELECT knob. 1ST FRY starts to fl.ash and 2ND FRY is displayed. Turn the SCROLL/SELECT knob to highlight 2ND FRY. 2ND FRY starts to fl.ash to show it has been highlighted. Press the SCROLL/SELECT knob to confirm. 1ST FRY will now disappear. The deep fryer will move to the heating stage until the correct temperature is reached. TWICE FRIED CHIPS, FRESH, 2ND FRY, HEATING and the actual temperature of the oil will show. When the oil has reached the correct temperature, PRESS TIMER will display.
3. Fill the basket with the 1st fried chips. Lower the basket into the deep fryer and press the TIMER button. PRESS TIMER will disappear. The timer will begin to count down. When the timer finishes counting down, the alarm will sound to signal the end of the cooking cycle. PRESS TIMER displays.
4. Press the TIMER button and raise the basket. Allow to drain and cool, then turn out into a lined bowl.

Repeating 1ST FRY with new batch of fresh chips

1. Empty the contents of the basket onto a plate lined with paper towel to cool.
2. Follow the instructions for 1ST FRY above.

Custom Mode

The CUSTOM cooking mode has a default setting of 5:00 minutes and 160°C. This can be changed by turning the SCROLL/SELECT knob to CUSTOM and then changing either the time or temperature or both. If the default setting in customer mode are changed, the deep fryer will remember the last settings that have been selected, even after being unplugged..

COOKING GUIDE

Foods should be crisp when deep fried. If results are soggy, the oil isn’t hot enough. This can be attributed to one or more of the following:

• Not enough preheating time
• Temperature too low
• Too much food in the basket (do not fill more than two thirds full)
• Do not use solid frying oil, only use liquid oils

Use good quality liquid oil. For best results, use the below recommended oils
NOTE: If cooking large quantities of food (approx 600g-1.25kg). It is not recommended to cook with the lid on due to the possible build up of excess condensation.

The most suitable oil for deep frying include:

All oils have different smoke points. Smoke points are the point at which the fat begins to break down into visible gaseous products.

• The smoke point of different fats is determined by the free fatty acid content of the fat. Generally, the lower the free fatty acid content the more stable the fat and the higher the smoke point.
• Free fatty acid levels are generally lower in refined vegetable oils with a smoke point of around 230°C. Where as animal fats are around 190°C.
• The smoke point of a deep-frying fat is lowered every time it is used. Food particles are always left behind after cooking. This will also lower the smoke point of the fat.
• Suitable oils for deep frying include: Peanut oil, Vegetable oil, Canola oil, Safflower oil and Rice Bran oil. Olive oil is not recommended for deep frying due to its low smoke-point temperature. These oils are described below:

PEANUT OIL

Peanut oil is obtained from the kernels of the ground nut or peanut. It has a delicate flavor, nutty odor and has a high smoke point. Peanut oil is high in mono-unsaturated oil and vitamin E.

VEGETABLE OIL

A general term that refers to a blend of oils extracted from various seeds and fruits. Vegetable oil has a very mild flavour and aroma. It is low in cholesterol and saturated fats.

CANOLA OIL

Made from seeds of the canola plant. It is relatively low in saturated fats, contains Omega 3 fatty acids and has a bland, neutral flavor.

SAFFLOWER OIL

The oil is extracted from the seeds of the sunflower plant. It is pale yellow in color with virtually no flavor. Sunflower oil is high in polyunsaturated fats and low in saturated fats.

RICE BRAN OIL

The oil is extracted from the germ and husk of rice. It has a mild, nutty flavor and high smoke point. It is high in vitamin E and antioxidants.

Method for the perfect chips

1. Select any of the following oils: peanut oil, rice bran oil, sunflower oil, vegetable oil.
2. Use a floury unwashed potato such as Sebago or King Edward.
3. Wash and peel potatoes.
4. Cut into 1cm thick chips and place into a large bowl. Cover with cold water and juice of a lemon to prevent potatoes from browning.
5. When ready to use, drain and dry thoroughly with paper towel.
6. Fill deepfryer with 4 litres of oil.
7. Set deepfryer to TWICE FRY CHIPS/ FRESH setting.
8. Select 1ST FRY and press the START/CANCEL button to PREHEAT the oil.
9. Cook 1kg batches of chips at a time.
10. Place chips into basket and lower into hot oil. Press TIMER button. Cook until the alarm sound signals end of cooking cycle.
11. Remove chips from oil and drain on a tray lined with paper towel; refrigerate until cooled.
12. Continue this method until all the potatoes have been through the 1ST FRY.
13. Alternatively, to continue cooking chips directly onto 2ND FRY, leave blanched chips in basket and drain on basket hook.
14. Select TWICE FRY CHIPS/FRESH setting and choose 2ND FRY. Press START/CANCEL button to PREHEAT the oil and continue as below.
15. Lower into hot oil. Press TIMER button. Cook until the alarm sound signals end of cooking cycle.
16. Remove chips from basket and drain onto a tray lined with paper towel.
17. Season with sea salt and serve immediately.

NOTE: Twice fried chips temperatures are based on 1kg load of fresh hand cut potato chips. Smaller batches of chips can be cooked, follow chart on page 18 for cooking temperatures and times.

Storage and preparation of used oil

Re-using your oil is best achieved if proper methods are used after and during cooking.

1. Never season or salt food before or during cooking as it will burn and discolor the oil. This in turn shortens the lifespan of your oil.
2. Cool oil completely before pouring through a coffee filter or cloth to remove food solids and debris.
3. Store in a sealed container either in the refrigerator or in a cool dark cupboard.
4. Repeat the filtering and cleaning process after each use.
5. Properly dispose of old used oil according to council requirements.

COOKING GUIDE

PRESET WEIGHTS/TEMPERATURES/TIME CHART

NOTE: These times and temperatures are specific for the weights. Variations in thickness and variety of fish, potatoes and chicken will vary the cooking times. Cooking temperatures and times were determined using fresh peanut oil. Only 4-5 uses. 

CARE & CLEANING

ERROR MESSAGE

When the deep fryer needs to be reset a RESET message will fl.ash on the display. To reset, allow the deep fryer to cool completely, and then press the two red reset buttons located above the cord storage area at the back of the control panel. If the Temperature Control detects oil temperature to be less than -20°C it will display the message ERl. If the Temperature Control detects the oil temperature to exceed 210°C the display will show the message ER2. Reset the unit as per above.

AUTO CUTOUT SAFETY FEATURE

Always add the required amount of oil BEFORE switching the power on at the power outlet. An Auto Cut-Out safety switch will be activated if the deep fryer is turned on without oil in the bowl. The fryer will then need to be reset as above.

CLEANING

Before cleaning, always ensure the deep fryer is turned off and disconnected from the power outlet. Ensure the deep fryer and oil are completely cool. Oil will retain its temperature for a long time after use. Do not attempt to move or carry the deep fryer, element or control panel while they are hot. Wash the frying basket in hot, soapy water. Rinse and dry thoroughly. Remove the control panel/element of the deep fryer by lifting upwards. Place the element onto kitchen paper to absorb excess oil. Wipe element with a soft, damp cloth and dry thoroughly. Grasp each side of the removable frying bowl and lift upwards. Empty the cooled oil from the frying bowl. Oil can be reused several times, depending on the type of food cooked. Filter the oil through a fine sieve.

NOTE: Oil should be filtered after each use and stored in a clean, airtight container in a cool area. Good quality oil can be used several times. Do not store the oil in the deep fryer. Discard used oil in a sealed container with household waste. Do not pour down a sink or drain.

Wash the lid, removable inner frying bowl, stainless steel outer body and wire frying basket in hot soapy water, rinse and dry thoroughly The removable inner bowl allows for easy cleaning. Wipe the bowl with paper towel, then a damp cloth and a little mild detergent. Finish off with a clean damp cloth followed by a clean dry cloth.

IMPORTANT: Never immerse the deep fryer control panel, element or cord in water or any other liquid. Always turn the appliance off at the power outlet and then unplug cord before attempting to move the appliance and before cleaning. 

Breville The Smart Fryer BDF500UK Deep Fryer Instruction Booklet – Optimized PDF
Breville The Smart Fryer BDF500UK Deep Fryer Instruction Booklet – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>