concept ETV 7560bc Built In Multi functional Electric Oven Instruction Manual

: June 5, 2024
: concept

Table of Contents

concept ETV 7560bc Built In Multi functional Electric Oven
ACKNOWLEDGEMENTS
TABLE OF CONTENTS
TECHNICAL FEATURES
IMPORTANT NOTICES
PRODUCT DESCRIPTION
Individual Baking Functions
BAKING TIPS
OPERATING INSTRUCTIONS
ADVANCED BAKING FUNCTIONS
CLEANING AND MAINTENANCE
APPLIANCE INSTALLATION
SERVICING
PROTECTION OF THE ENVIRONMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

concept ETV 7560bc Built In Multi functional Electric Oven

concept ETV 7560bc Built In Multi functional Electric Oven-
FIG1

ACKNOWLEDGEMENTS

Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its service life.
Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe place for future reference. Make sure that all other people using the appliance are familiar with the contents of the instruction manual.

Technical Features
Important Notices
Condensation
Product Description
Control Panel Description
Individual Baking Functions
Baking Tips
Operating Instructions
Basic Functions of the Unit
Advanced Functions of Baking
Soft closing doors
Correct Positioning of the Grills or Pans in the Appliance
Telescopic Rails
Cleaning and Maintenance
Installation of the appliance
Servicing
Protection of the Environment

TECHNICAL FEATURES

Technical Features

The manufacturer reserves the right to make possible technical changes and to correct print errors and differences in the illustrations without previous notice.

IMPORTANT NOTICES

Upon delivery of the electric appliance

Check the package and unit immediately after delivery for any damage that may have occurred during shipping.
CAUTION! Some edges of the unit that are hidden after installation may be sharp! Proceed with caution to prevent injury!
If the appliance is damaged, do not operate it. Contact the supplier as soon as possible.
Remove all the packaging and marketing materials from the unit before the first use.
Keep the packaging material out of the reach of children or dispose of it properly.

During installation

Use the unit only as described in this operating manual.
This unit may be used in households and similar places, for instance:
- Kitchenettes in shops/stores, offices and other workplaces.
- Appliances used in agriculture.
- Appliances used by guests in hotels, motels and other places.
- Appliances used in bed-and-breakfast establishments.
Do not use the unit if you are barefoot.
Do not touch the appliance with damp or wet hands.
Do not put oversized food or metal objects inside the appliance. These could cause a fire.
Do not store anything inside the appliance.
Do not sit or stand on the open door of the appliance.
Do not allow children or irresponsible people to handle the appliance. Use the appliance out of the reach of such people.
Children should not play with the appliance.
Take extra care when using the appliance near children.
Do not let anyone use the appliance as a toy.
This appliance may be used by children aged 8+ and people with reduced physical, sensory or mental capabilities, or without any appropriate experience and knowledge only if they are under supervision or were acquainted with the operating instructions for safe usage of the appliance and understand its risks.
CAUTION! A large volume of steam may be released or grease may splash out when you open the door. Be very cautious. There is a risk of scalding!
Do not touch hot surfaces or heaters during use or shortly after use of the unit.
Turn off the appliance and disconnect the plug from the mains outlet in the event of any failure.
When disconnecting the unit from the wall outlet, never pull the power cord. Grasp the plug and disconnect it by pulling.
Do not immerse the power cord or plug in water or any other liquid.
Check the appliance and the supply cable regularly for any damage.
Never turn the appliance on if damaged.
Do not use the unit if the door or packing is damaged. Have the unit repaired in an authorised service centre.
Do not use any accessories other than those recommended by the manufacturer.
Do not use accessories that have a damaged surface finish, are worn, or have other defects.
Cleaning and maintenance by the user may not be done by children under the aged of 8 and only under supervision.
CAUTION!
Open the unit only for a short time to put in or take out food, so as to prevent injury caused e.g. by tripping. Children could lock themselves in the unit (risk of suffocation), or be exposed to other dangers.

Condensation
When baking foods with a high content of water, cautiously open the door. Hot air comes into contact with cold air and steam may condense on the door, which turns to water and may subsequently trickle into the lower section of the appliance. You reduce this phenomenon by opening the door less frequently. Wipe off any condensed water with a cloth or kitchen paper to prevent damage to the furniture below the appliance.

Possible failures

Only qualified personnel may repair and intervene in the unit.
The unit should be disconnected from the electric network during repairs and interventions. Turn off the circuit-breaker and disconnect the plug from the mains socket.
When disconnecting the unit from the wall outlet, never pull the power cord. Grasp the plug and disconnect it by pulling.
Failure to follow the manufacturer‘s instructions invalidates the warranty.

PRODUCT DESCRIPTION

concept ETV 7560bc Built In Multi functional Electric Oven-
FIG2

Control panel
Door handle
Door
Triple-glass window of the door

Accessories

A Grill
B Shallow roasting sheet
C Deep roasting sheet
D Telescopic Rails
E Catalytic plates

Control Panel Description

concept ETV 7560bc Built In Multi functional Electric Oven-
FIG3

K1 Baking function selector
K2 Temperature selector
1 Remind button
2 Time button
3 Stop (Pause) button
4 Start button

Individual Baking Functions

concept ETV 7560bc Built In Multi functional Electric Oven-
FIG4

BAKING TIPS

The exact values of temperature for each kind of dish and the different ways of baking have to be tried out.
During baking open the door of the appliance as infrequently as possible. Otherwise the temperature mode of baking would be disturbed, the time of baking would extend and the food could be burnt.
Marinated meat and meat without bones roast faster than unprepared meat. To check thorough roasting of meat, press it (e.g. with a fork). If it does not release juices it is done.
Meat which is larded or covered with bacon must not be roasted at high temperature, so that the grease does not sputter.
When roasting big pieces of meat juices evaporate, which then condense on the appliance door. This is natural and it does not imply any danger to the use of the appliance. After the end of baking, wipe the appliance door and the surrounding space in the appliance dry.
The pastry will swell only after 2/3 of the stated baking time has elapsed. The time of baking depends on the type of filling (fruits, jam).
Whipped dough should not contain too much water, which extends the time of baking.
Do not put utensils directly on the bottom of the appliance, otherwise they would prevent the spreading of heat and thus could cause damage to the enamel because of overheating.
When baking in several pans, different dishes put into the oven at the same time may not be ready at the same time.
Baking pans are not designed for long-term storage of food (more than 48 hours). For longer storage transfer the food to a suitable utensil.
When baking without the fan we recommend pre-heating the appliance for approximately 10 – 15 minutes. Do not open the appliance door unnecessarily during baking.
Before grilling, preheat the grill for about 5 minutes (until the grill heater is red-hot). The grill grid with food should be placed as close as possible to the heater. To collect the drippings, put a pan with a little water under the grill. Grilling will enable browning and a crispy surface on the roasted meat.
CAUTION!
When using the grill, the accessible parts of the appliance may become too hot. Prevent children from accessing the hot parts of the appliance.
When baking with the fan it is not necessary to preheat the appliance, except for baking food with very short baking times, or in the case of baking food with a high water content (e.g. fruit cakes) to prevent condensation of water vapours. In this appliance, various foods with similar baking/roasting times can be prepared in two trays simultaneously, even if the baking/roasting time differs. The scent and taste of the foods do not influence each other. Putting in and taking food out of the appliance does not result in huge heat losses. The temperature is quickly compensated by the fan. The baking temperatures are lower than those used in the standard baking mode (by 20 – 30°C for pastry and by 30 – 40° C for meat); the time of baking is longer (by approx. 5 – 10 minutes). When baking small pastries in two pans, we recommend swapping the height of both pans after 2/3 of the baking time or taking the pan that is ready sooner out earlier.
When defrosting, lay the frozen food in the packaging on a dish, put it on the grill in the centre of the appliance and switch-on the appliance in Defrost mode. The appliance door must be closed.
When grilling with the fan and upper heater it is not necessary to preheat the appliance. Grill with the appliance door closed. When grilling this way set the thermostat as needed within the range from 50 to 200°C. The distance between the food and the grill heater must correspond to the required results:
- smaller distance for a brown surface and underdone inside,
- bigger distance for thorough roasting of the food.
  For catching the dripping gravy, place a plate with a little water under the meal.

OPERATING INSTRUCTIONS

Before the first use
- Prior to using a new unit, wipe the inside with a wet cloth for hygienic reasons. Wash all the removable parts in warm water with a detergent, or in a dishwasher.
- Then, heat the unit without food at maximum temperature (250°C) for 30 minutes. You can find the information related to the temperature and heating time adjustment in the paragraph Appliance Fundamental Functions (page 65).
- The unit may emit a slight smell and smoke, which should disappear after a while. Air the room well during this process.
  Note: Baking selector (K1) and temperature selector (K2) pop-up upon pressing so that it is possible to cont-rol the appliance. If you want to prevent accidental changing of settings during baking or after the baking is finished, fix them in the inserted position by pushing down to stop.
Daytime setting

1. After connecting the appliance to the mains, the symbol 0:00 will appear on the display.
2. Press button (2) to activate the mode of setting the time of day (the hour position starts blinking).
3. Turn the selector (K2) to set the time in hours (in the range 0 to 23).
4. Upon pressing button (2) the numbers start blinking.
5. Turn the selector (K2) to set the time in minutes (in the range 0 to 59).
6. Press button (2) to end the setting of the time of day. The symbol „:“ starts blinking. This activates the time and it is shown on the display.

Daytime setting change

1. Push the button (2) in the standby mode. It will activate the daytime setting (clock digit will start blinking).
2. Turn the selector (K2) to set the time in hours (in the range 0 to 23).
3. Upon pressing button (2) the numbers start blinking.
4. Turn the selector (K2) to set the time in minutes (in the range 0 to 59).
5. Press button (2) to end the setting of the time of day. Symbol „:“ will blink.

This activates the time and it is shown on the display.

Appliance Basic Functions

1. Place the pan with the food in the selected position.
2. Turn function selector (K1) to select the required baking function. The display simultaneously also shows the preset baking temperature for the given function.
3. Turn selector (K2) to set the required temperature.
4. Press button (4) to confirm the start of baking. Upon pressing button (4) the display shows the preset time 9:00 and the blinking desired temperature.
5. To end baking, press button (3) twice.

Note: For this basic function, it is not necessary to have the time of day set.

ADVANCED BAKING FUNCTIONS

The advanced functions extend the baking possibilities and thus provide more convenient use of the unit.

Setting the baking time

Turn function selector (K1) to select the required baking function. The selected function is displayed on the left side of the panel above button (K1). The display simultaneously also shows the preset baking temperature for the given function.
Turn selector (K2) to set the required temperature.
Press button (4) to confirm the start of baking. Upon pressing button (4) the display shows the preset time 9:00 and the blinking desired temperature.
By turning function selector (K1), it is possible to preset the baking time. Upon pressing button (4), the preset baking time is confirmed.
By turning temperature selector (K2), it is possible to preset the baking temperature. Upon pressing button (4), the set baking temperature is confirmed.
If button (4) is not pressed within 3 seconds after setting the desired value, the appliance jumps back to the previous state (applies to the setting of time and temperature).
Note:
If step 2 is omitted, after pressing button (4) the selected baking function is activated with the pre-set temperature and time, which is shown on the display.
When setting the baking time using selector (K1), the minutes are changed in the following steps:
0:00-0:30: in increments of 1 minute
0:30-9:00: in increments of 5 minutes

Start/Pause/Cancel

After selecting the function using selector (K1) and setting of the desired baking temperature using selector (K2), press button (4) to start baking.
If the baking is interrupted, press button (4) to continue baking.
To interrupt baking, press button (3) once.
To cancel baking, press button (3) twice.

Activation of the light in the appliance

1. By turning selector (K1), you select the corresponding function to activate the light in the appliance .

You confirm activation of the light in the appliance by pressing button (4). The display shows 0:00. On the left side of the panel, the appropriate icon for activation of the light in the appliance is illuminated and the symbol “:” blinks.

Delayed baking start function
To set this function, the time of day must be set. To set the delayed baking timer function, do the following:

Press button (2).
Turn selector (K2) to set the hours (the time can be set in the range from 0 to 23).
Press button (2) again.
Turn selector (K2) to set the minutes (the time can be set in the range from 0 to 59).
Turn selector (K1) to select the baking function.
Press button (4) to set the baking temperature and time. Turn button (K1) to set the baking time and selector (K2) to set the desired temperature.
Press button (4) to finish the setting. The display will show the icon with the set delayed start time.
By pressing button (2), the set delayed baking start time is displayed for a period of 3 seconds. After this, the display shows the time of day.
Upon lapse of the set delayed baking start time, an audible sound is emitted and the set baking program automatically starts. Icon on the display goes off.
To cancel the set delayed baking start time, press button (3) twice.
Note:
This function cannot be used for light activation and defrosting.
With the delayed start function activated, press button (3). The baking time and temperature start blinking.
To cancel the delayed baking start time, press button (3) again. To continue baking, press button (4).

Reminder function
This function will help remind you about the start of baking at the set time and can be set in the range 0:01 to 9:59. This function can be set only when the appliance is in standby mode. To set the reminder function, do the following:

Press button (1).
Turn selector (K2) to set the hours (the time can be set in the range from 0 to 9).
Press button (1) again.
Turn selector (K2) to set the minutes (the time can be set in the range from 0 to 59).
To confirm the set time push the button (4). The time will count down.
Note:
After completion of the countdown of the set time, ten beeps are emitted.
When setting the reminder function, you can cancel this by pressing button (3).
To cancel the set reminder time, press button (3) twice.

Display of the time of day during baking

During baking, it is possible to display both the time of day using button (2), as well as the set reminder time using button (1).
The time of day and the reminder time are visible for 3 seconds, after which the display shows the previous state (set baking time and temperature).
Note: For this function, the time of day must be set on the unit.

Child lock function

To activate the child lock, press buttons (4) and (3) simultaneously for 3 seconds.
After this period an audible signal is heard and the display shows icon , which indicates that the appliance is locked.
To deactivate the child lock, press buttons (4) and (3) simultaneously for 3 seconds.
After this period an audible signal is heard and icon disappears from the display.

Energy saving features

If the display shows the time of day, or if the reminder function is set, press button (4) for 3 seconds. The display goes off and the energy-saving function is set.
If the appliance is in standby mode and if no action is taken within 10 minutes, the display goes off and the energy-saving function is set automatically.
To cancel the energy-saving function, press any button, or turn any of the selectors (K1 or K2).

Segments on the display
The set baking time is calculated in the form of individual segments, which gradually go off according to the elapsed time.
Note:

After setting the time and temperature of the selected baking program, the display shows 10 segments.
These segments gradually go off according to the elapsed baking time.
E.g.
- Set time 0:01 – each segment is equal to 6 seconds
- Set time 0:02 – each segment is equal to 12 seconds, etc.

Notes

The light comes on upon activation of any baking function.
To set a function other than the current baking function, the active baking function must be cancelled by pressing button (3) twice.
If the baking function is set and button (4) is not pressed within 5 minutes after setting the program, the time of day appears on the display. The setting for the selected program shall be deleted.
Upon pressing any button, or turning one of the selectors, an audible signal is emitted.
At the end of the selected baking function, a five-fold audio signal is emitted.
At the end of the reminder function, a ten-fold audio signal is emitted.

Soft closing doors

If the appliance door is open at an angle >30°, the door is still at any position.
If the appliance door is open at an angle ≤30°, the door closes slowly by means of the damper.
Caution: Do not close the appliance door too quickly, it could cause damage to the appliance

Correct positioning of the grill or pan in the appliance
The grill or pan must be positioned correctly (at the same height) in the side racks.

Telescopic rails
The telescopic rails allows detraction of the baking pans, and hence ease access when inserting or removing baking pans or when checking food during baking (Fig. 1).

CAUTION!
The telescopic rails get very hot during operation. Risk of burns! When putting the baking pans in, place them on the protrusions at the ends of the rails.

When putting in or taking out the baking pans proceed with caution and make sure the pans do not slide down from the rails. It is possible to use the telescopic rails at all heights. To change the height of the telescopic rails follow these steps:

Take the baking pans and grill from the appliance.
Unscrew the screws on the internal sides of the appliance and remove the side racks.
Unscrew the screws, which are in the bottom section of the telescopic rails.
Remove the rails from the ride racks.
Place the rails at the desired height position and fasten.
Re install the ride racks with telescopic rails in the interior of the appliance.

Cooling fan
The fan is located on the upper side of the appliance and provides the circulation of cool air in the equipment. The fan switches on automatically when the appliance is switched on. If the baking program ends or is interrupted by the cooling fan, it remains active until the temperature of the appliance drops below the safe limit.

concept ETV 7560bc Built In Multi functional Electric Oven-
FIG12

CLEANING AND MAINTENANCE

For the sake of good appearance and reliability, keep the appliance clean. The modern design of the unit facilitates the maintenance to the minimum. The parts of the appliance that come into contact with food have to be cleaned regularly.

Prior to any maintenance or cleaning, disconnect the power cord from the mains or switch off the circuit breaker of the appliance mains outlet.
Wait until the inside of the appliance is no longer hot but is still lukewarm – cleaning is easier than when it is cold.
Clean the outer surface of the appliance with a damp cloth, soft brush or light sponge and then wipe it dry.
The bottom and ceiling of the appliance can be wiped with a damp cloth, soft brush or sponge. In the case of heavy dirt, use hot water with a non-aggressive detergent.
Do not use coarse abrasive cleaners or sharp metal scrapers to clean the door glass of the appliance, since they can scratch the glass surface or the glass may break.
Never leave aggressive or acidic substances (lemon juice, vinegar) on the enamelled, varnished or stainless parts.
Do not use a steam cleaner to clean the appliance!
The baking pans may be washed in a dishwasher.

APPLIANCE INSTALLATION

Do not lift the appliance by holding it by the handle of the door!
Defects caused by incorrect installation are not covered by the warranty.
Only the customer, not the manufacturer, is responsible for the appliance installation.
The manufacturer bears no responsibility for damage caused to people, animals or objects as a result of incorrect installation.
To ensure correct function of the appliance, install it in suitable furniture.
The unit should be installed in standardised kitchen furniture designed for built-in appliances or in properly adapted furniture of dimensions according to Fig. 2.
The appliance may be located either under a kitchen cabinet or in a stand-alone cabinet (Fig. 2).
The kitchen furniture must be made of heat-resistant material (at least 120 °C). The materials and used glues must be resistant to the warming of the unit according to the ČSN EN 60335-2-6 standard. Materials and glues which do not meet the stated standard may deform or come unstuck.
All the protective covers must be fixed at their positions so that it is not possible to remove them without using a special tool.
The rear board of the kitchen unit must be removed to ensure proper circulation of air around the appliance.
If a cook top is above the appliance, a gap of at least 50 mm must be between them.

Connecting to the mains

Make sure the mains voltage and current protection correspond to the values on the rating plate. We recommend using a separate outlet circuit with a 16A circuit breaker.
Use grounded wall outlets only.
Do not use adapter sockets, connectors or extension cables. They could create a risk of overheating.
The supply cable plug has to be freely accessible even after the installation of the unit.
Only a qualified expert can perform connection changes.
The electrical safety of the appliance can only be guaranteed if the protective terminal of the appliance is connected to the protective conductor of the mains.
The manufacturer bears no responsibility for damage caused to people or objects as a result of a missing or bad protective connection.
The power cord must be located so that it does not come into contact with hot parts of the appliance and so that it is not deformed or excessively bent.

Follow the installation instructions below:

Remove all the packaging and marketing materials from the unit before the first use.
For the sake of efficient air circulation the unit has to be located according to the dimensions on Fig. 2 and the design of the cabinet must enable air flow into its bottom part. The gap behind the rear wall of the built-in appliance must be at least 50 mm.
Put the unit on the edge of the cabinet and run the power cord through the rear wall of the cabinet so that its plug is accessible after installation.
Push the unit carefully to the selected place in the cabinet. Be careful not to squeeze the power cord.
Attach the unit to the cabinet by screwing two screws in the holes in the front wall of the cabinet. The holes can be seen after opening the door.
Plug the supply cable into the wall outlet.

Removal
To uninstall the appliance, it is important to proceed correctly:

First, unplug the power cord from the mains (pull out the plug or switch off the circuit breaker).
Remove the attachment screws.
Slide out the appliance and at the same time pull out the power cord carefully.

SERVICING

Replacing a bulb
To illuminate the interior of the appliance, a halogen bulb of high thermal resistance is used (5-40W/220-240V, T300°C).

To remove the bulb proceed as follows:

Disconnect the appliance from the power supply, or switch off the appropriate
circuit breaker.
Unscrew the glass cover in the anti-clockwise direction according to Fig. 3 and replace the bulb with a bulb of the same type and parameters.
When installing a new bulb, use a rag or paper wipe to hold the bulb.
Re-install the glass cover.

PROTECTION OF THE ENVIRONMENT

Packaging materials and obsolete appliances should be recycled.
The transport box may be disposed of as sorted waste.
Polyethylene bags should be handed over for recycling.

Appliance end-of-service-life recycling:
This appliance is marked in compliance with Directive 2012/19/EU of the European Parliament and of the Council on waste electrical and electronic equipment (WEEE). A symbol on the product or its packaging indicates that this product should not go into household waste. It must be taken to the collection point of an electric and electronic equipment recycling facility. By making sure this product is disposed of properly, you will help prevent the negative effects on the environment and human health that would otherwise result from inappropriate disposal of this product. Disposal must be done according to the waste management regulations. You can learn more about recycling this product from your local authorities, a household waste disposal service or in the shop where you bought this product.