HEAVYS H1H Headphones User Guide

June 11, 2024
HEAVYS

HEAVYS H1H Headphones User Guide
HEAVYS H1H Headphones

Power On/Off
Using Instruction

LED Color Code
Using Instruction

Bluetooth On/Off Pairing
Using Instruction

Bluetooth Pairing Reset
Using Instruction

Analog Mode
Using Instruction

Digital Wired Mode
Using Instruction

Play/ Pause
Using Instruction

Volume Up/Down
Using Instruction

Next Track
Using Instruction

Previous Track
Using Instruction

Phone calls Answer/End/Decline
Using Instruction

Hell Blocker Mode
Using Instruction

Transparent Mode On/Off
Using Instruction

Voice Assistant
Using Instruction

Sound Dosimeter On/Off
Using Instruction

Loudness Enhancer On/Off
Using Instruction

Charge
Using Instruction

Important Safety Instructions Read all the instructions before using the

product

  1. To avoid accidental ingestion, keep the small parts away from small children and pets
  2. Do NOT use the headphones at a high volume for any extended period
  3. To avoid hearing damage, use your headphones at a comfortable, moderate volume level. Turn the volume down on your device before placing the headphones in your ears, then turn the volume up gradually until you reach a comfortable listening level. Long-term exposure to loud music or sounds may cause hearing damage. It is best to avoid high volume levels when using these headphones, especially for extended periods
  4. Do not use these headphones when operating a motor vehicle, a bicycle, machinery or where your inability to hear outside sounds may present danger to you or to others
  5. Using these headphones limits your ability to hear noises around you, regardless of listening volume. Please be cautious when using these headphones
  6. Use caution and follow applicable laws regarding mobile phone and headphone use if using the headphones for phone calls while driving. Some jurisdictions impose specific limitations, such as single earpiece configuration, on the use of such products while driving
  7. Do not drop the earphones, insert, or allow to be immersed in water
  8. Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC)
  9. Using an AC adapter or charger from a non-certified manufacturer could result in fire or personal injury
  10. Do not use headphones that are damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury to persons
  11. Do not disassemble the headphones. Incorrect reassembly may result in risk of fire or injury to persons
  12. Do not open, crush, or expose the headphones to fire, or excessive tern fire or temperature above 212° F, 100°C may cause explosion
  13. Have servicing performed by a qualified repair person using only ident parts.
  14. This product contains magnetic material. Consult your phy ician on wf her th s affect your implantable medical device
  15. Do NOT make unauthorized alterations to this product.

Regulatory Compliance I/III

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Heavys authority to operate this equipment.
This device complies with part 15 of the FCC Rules and with R55 standard(s). Operation is subject to the following two cc cause harmful interference, and 2) this device must accept an interference that may cause undesired operation.
This device complies with FCC and Industry ISED radiation general population. It must not be co-located or be operating antennas or transmitters. FCC ID: 2BA0A-H1H
Model: H1H

Regulatory Compliance II/III

Management Regulation for Low-power Radio-frequency Devices
Article XII
According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power, or alter original characteristic as well as performance to an approved low power radio-frequency devices.
Article XIV The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; if found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.

Regulatory Compliance

 Heavys Inc. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements.
The complete declaration of conformity can be found at: https://www.heavys.com/support/declaration-of-conformity/
For Europe: Frequency band of operation 2400 to 2483.5 MHz Bluetooth: Maximum transmit power less than 20 dBm EPP Bluetooth Low Energy. Maximum power spectral density less than 10 dBm/MHz E1PP
DON’T attempt to remove the rechargeable lithium-ion battery from this product. For the exchange, contact HEAWS Inc. Service growl©heavys.com or a qualified specialist.

 Please dispose of used batteries properly, following local regulations. Do not incinerate.

Recycle Icon This symbol means the product must not be discarded be delivered to an appropriate collection facility for recy recycling help protect natural resources, human health, information on disposal and recycling of this product, cc disposal service, or the shop where you bought this pro rechargeable lithium-ion battery in this product should professional.

EU Importer HEAWS/1m Wiesengrund 2 /31303 Burgdor
The Bluetooth word mark and logos are registered trad Inc., and any use of such marks by HEAWS Inc. is under
No part of this work may be reproduced, modified, distr prior written permission.

Heavys Inc., and other marks are registered trademarks of Heavys, Inc. All rights reserved. Driver diameter: 2x 38mm 2x12mm. Impedance. 42 Ohms. THD: <0.5% ©1kHz 100 dB SPL Battery: 3.7V, 880mAh, 3.26Wh. Bluetooth 5.1, Frequency Band: 2402MHz -2480 MHz, Weight: 308g.

SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Heavys Inc declares that the radio equipment type [Model: H1H is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:
heavys.com/product-documents

This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt PSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

USA
Heavys, Inc.
1216 Broadway
New York City, NY
10001 U.S.A.
Heavys.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals