HOMWMPA 1050 Garage Door Seal Top Instructions
- June 2, 2024
- HOMWMPA
Table of Contents
HOMWMPA 1050 Garage Door Seal Top
INTRODUCTION AND PACKING LIST
PRODUCT INTRODUCTION
- Garage Door Top and Sides Seal that stops cold air, dust, leaves and moisture from blowing in through the top and sides your garage door.
- It will also extend the life of your door by providing a shock-absorbing cushion when it is closed.
PACKING LIST
HELPFUL TIPS
- Before installation.wrap the product in reverse direction and let it stand for two hours for easier installation and better effect.
- Installation requires a drill with phillips bit and sturdy shears for cutting the garage seal.
- Use care when handling and cutting. Always wear gloves and safety glasses.
- Use the safety rope to lock the garage door to make sure safe when installation.
Features
- WATERPROOF
- WINDPROOF
- RAINPROOF
- DUSTPROOF
- ANTI-INSECT
- ENERGY SAVING
Installation Instructions
Plan A: SUITABLE FOR WOODEN WALLS
- Clean the jamb of the garage door.
- Measure the length of garage door and trim the length of seal strip. (When cutting, make sure to cut from the soft side to the hard side.)
- The sealing strip marks the perforation points the aperture is about 0.16 in), about 1.2 feet apart.
- Tear the back adhesive protective film at one end of the garage door seal strip and paste it in the fixed position.
- Before installing the screws, put the decorative cap on the screws and then fix the screws.
Plan B: SUITABLE FOR HARD WALLS
- Clean the jamb of the garage door.
- Measure the length of garage door and trim the length of seal strip. (When cutting, make sure to cut from the soft side to the hard side.)
- The sealing strip marks the perforation points(the aperture is about 0.16 in), about 1.2 feet apart.
- Mark the punch position of sealing strip on the jamb, Drill a hole (aperture about 1/4 in), and install the plastic expansion tube.
- Peel off the adhesive tape,attached sealing strip to the jamb of garage door, Before installing the screws, put the decorative cap on the screws and then fix the screws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>