MONSTER M2 Pro Wireless Vertical Mouse Instruction Manual
- June 15, 2024
- Monster
Table of Contents
Instruction Manual AIRMARS M2 PRO WIRELESS VERTICAL MOUSE
MANUAL
PRODUCT SPECIFICATION
• Number of buttons | 8 |
---|---|
• Transmission distance | 10m |
• Button life | 5 million times |
• Mouse battery | 500mA |
• Operating system support | Mac/Windows |
• Mode | 2.4G+BT1+BT2 |
• DPI | 800/1200/1600/2400 |
• Mouse size | 115.3766.2866.29mm |
PACKAGE INCLUDES
| Mouse1
---|---
| Instruction manual1
| Type-C charging cable1
| 2.4G receiver1
PRODUCT DIAGRAM
LED1: Charging/Low battery indicator
LED2: 2.4G Mode indicator
LED3: BT1 Mode indicator
LED4: BT2 Mode indicator
LED5: Window switching
LED6: Zoom in and out(for pagesand images)
LED7: Page moves left and right(for excel)
Name Description
- Bluetooth name:
1. M2 PRO-BT1
2. M2 PRO-BT2
2.4G WIRELESS MODE CONNECTION
- Turn on the power switch to “ON”
- Take out the USB dongle and insert into your computer
- Double-click on the mode switch botton to 2.4G, green light on, indicating you have successfully connected to 2.4G mode.
2.4G STRONG PAIRING MODE
Under 2.4G mode, long press the middle button and right button for 3-5S until the 2.4G green light flashes quickly, then the mouse enters 2.4G wireless pairing mode. The search time is 30S, if no device is searched or not successfully connected, the mouse will automatically enter the sleep mode.
BLUTOOTH MODE PAIRING STEP
- Turn on the power switch to “ON”
- Double-click on the switch button to BT1 to enter into Bluetooth Mode, and then blue light on(If you switch to BT2,Blue 1 light on)
- Press and hold the switch button for 3-5S until BT1 blue light flashes quickly, the mouse is ready for pairing(Blue light flashes if you switch to BT2)
when you first switch into Bluetooth mode, if the indicator light flashes quickly, indicating that the mouse has entered into pairing status, waiting to connect.
LED LIGHT INDICATION
LED1 Indicator Light:
Charging: When charging, LED1 green light will stay on and will turn off
after fully charged.
Low Power indicator: LED1 red light flashes slowly Warm Reminder.
Warm Reminder:
The mouse will enter into sleep mode after 30 minutes of inactivity, you can
click any key to wake up.
Name of the Parts | Hazardous Substances |
---|---|
Pb | Hg |
Housing | ο |
PCBA | × |
Accessories | × |
This table is compiled according to SJ/T 11364.
Indicates that this hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in GB/T 26572
Indicates that this hazardous substances contained in at least one of the
homogeneous materials used for this part is the limit requirement in GB/T
26572.
Environment Friendly Use Period (EFUP)
This logo refers to the period (10 years) during which the hazardous
substances in electronic and electrical produsts will not Leakor mutate so
that the use of these [substances] will not result in any severe environmental
pollution, any bodily injury or damage to any assets.
Repair card
Dear users, this warranty card is your proof to apply for warranty in the
future.
Please cooperate with the seller to fill in it and keep it properly for use!
Information
name| | Email|
---|---|---|---
Contact number| | Postal code|
Mailing address|
Product Information
Product name| | Product model|
---|---|---|---
Product bar code/number/lot number|
name
|
---|---
site
|
Contact number
| |
postal code
|
Date of sale
| |
Invoice number
|
comment
|
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmfulinterference to
radio or television reception, which can be determined by turning the
equipmentoff and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0 cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>