ROHL TAM06W3IWMB Amahle Wall Mount Tub Filler Trim Instruction Manual
- June 15, 2024
- ROHL
Table of Contents
ROHL TAM06W3IWMB Amahle Wall Mount Tub Filler Trim
Two Handle Wall Mount Tub Filler (Style varies by model)
HELPFUL TOOLS
For safety and ease of installation, the use of these helpful tools is
recommended.
For warranty or additional information, contact
Parts List
- A. Handles (x2)
- B. Valve Flange (x2)
- C. Spout
- D. Spout Escutcheon
- E. Spout Stem Adapter
- F. Spout Set Screw
INSTALLATION INSTRUCTION
- Remove protective covers from the valve to begin faucet installation.
- Install Valve Flange (x2) (B) and then install Handles (x2) (A) onto the valve adapter until fully seated.
- If a gap remains once handle is installed, measure the distance from the finished wall to the handle base.
- Remove Handle (A), Valve Flange (B) and handle valve adapter from valve threads (x2).
- Once measurement is defined, carefully use a hacksaw to trim off the extra threads.
- Install the handle valve adapter, Valve Flange (x2) (B), and Handle (x2) (A), onto the shortened valve threads (x2).
- Handles (A) should now be flush with finished wall.
- Wrap Thread Seal Tape 3 turns around end of Spout Stem Adapter (E).
- Install Spout Stem Adatper (E) into center valve opening with 3/8″ hex wrench.
- Cut Spout Stem Adapter (B) to appropriate size. Install Spout Escutcheon (D) followed by the Spout (C) onto the Spout Stem Adapter (B) until fully seated against the wall.
- Using a 4mm hex wrench, tighten Spout Set Screw (F) into Spout (C).
- Installation is complete.
US Customers
U.S.A. houseofrohl.com/support 1-800-777-9762
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>