HOUSE OF ROHL R51 EXT51KIT 1/2 Inch Pressure Balance Rough In Valve Instruction Manual
- June 12, 2024
- HOUSE OF ROHL
Table of Contents
R51 EXT51KIT
INSTRUCTION MANUAL
R51 EXT51KIT 1/2 Inch Pressure Balance Rough In Valve
- Turn off stops and remove the cartridge. To remove your trim set, refer to original installation guide.
- Install centering pins and new bottom cavity gasket into the extension.
- Install the new puck extension and the balancing spool and cartridge into place.
- Install cartridge nut housing by hand tightening and apply a 1/4 turn with a wrench. Do not overtighten.
For warranty or additional information, contact:
INS12920 – Rev. 06/22
US Customers
houseofrohl.com/support
1-800-777-9762
Canadian Customers
houseofrohl.ca/support
1-866-473-8442
1-800-287-5354
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>