ROHL INS12571 Bath Accessories Instruction Manual
- June 10, 2024
- ROHL
Table of Contents
ROHL INS12571 Bath Accessories
Bath Accessories
The Bath Accessories are designed to enhance your bathroom decor and provide convenient storage for your bathroom essentials. Before installing, please read the following usage instructions and safety information.
Helpful Tools
For safety and ease of installation, the use of these helpful tools is recommended:
- Drill
- 3/32 (3 mm) Drill Bit
- Level
- Crosshead Screwdriver
Parts List
The following parts are included in the package:
- Anchors Sleeve (Qty. x2 or x4, as varies by product type)
- Self Tapping Screws (Qty. x2 or x4, as varies by product type)
- Mounting Plate
- Accessory
- Grub Screws (Qty. x2)
Installation Instructions
- Identify the desired installation wall location and mark the hole locations on the wall.
- Place the Mounting Plate flush against the wall and secure it with Self Tapping Screws.
- Install the Anchors Sleeve into the wall (if needed).
- Hold the Bath Accessory over the installed anchors and secure it with Grub Screws using a hex wrench.
- Ensure that the Bath Accessory is level and firmly installed.
- Installation is now complete.
Contact Information
If you need warranty or additional information, please contact:
-
For US Customers: houseofrohl.com/support
or call 1-800-777-9762 -
For Canadian Customers: houseofrohl.ca/support or
call 1-866-473-8442 (or 1-800-287-5354 for Ontario)
HELPFUL TOOLS
For safety and ease of installation, the use of these helpful tools is
recommended.
Product Parts List
- A. Anchors Sleeve
- B. Self Tapping Screws
- C. Mounting Plate
- D. Accessory
- E. Grub Screws
Qty. (x2) or (x4) as varies by product type
ASSEMBLY
- Once desired installation wall location is identified, place the Mounting Plate (C) flush against wall and mark the hole locations.
- Drill pilot holes for the mounting plate. Use 3/32″, 3mm drill bit size.
- Insert Anchor Sleeves (A) into drilled holes until flush with finished wall surface.
- While holding Mounting Plate (C) over the installed anchors, secure plate with Self Tapping Screws (B) until plate is firmly installed.
- Install Bath Accessory (D) onto Mounting Plate (C) until flush with wall.
- Using a hex wrench, secure Bath Accessory (D) with Grub Screws (E). Installation is complete.
For warranty or additional information, contact:
US Customers
U.S.A.
houseofrohl.com/support
1-800-777-9762
QUEBEC
houseofrohl.ca/support
1-866-473-8442
Canadian Customers
ONTARIO
houseofrohl.ca/support
1-800-287-5354
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>