So Plus Ring Smart Ring Health Tracker User Manual

Smart Ring Health Tracker

Specifications

• Product Name: So Plus Ring
• Function: Health Intellect Ring
• Disclaimer: The So+ Ring Service is not intended to diagnose,
  treat or prevent any disease or medical condition. The information
  and data in the service are for reference and do not replace
  professional or physician service. If you have any questions about
  your medical condition, consult a doctor.

Product Usage Instructions

1. Downloading the App

To use the So Plus Ring, follow these steps:

1. Search for “SoPlus Ring” on Google Play or the App Store.
2. Download and install the app.
3. Grant the app Bluetooth connection permission and location
   permission.

2. Wearing the Ring

Ensure accurate data collection by wearing the ring
correctly:

• Place the detection sensor (located on the inner ring) in close
  contact with your finger skin.

3. Charging, Turning On, and Turning Off

Manage the power of your So Plus Ring with these
instructions:

1. Charging:

• Connect the ring and charger using the provided charging
  cable.

• When the power is switched on, the ring indicator light will
  turn on.

• Indicator status:

  • While charging, the red light will be on.
  • When fully charged, the green light will be on.

• Charging time: 30 minutes

• Power consumption check: Check the power consumption icon in
  the upper right corner of the app homepage.

• Low power warning: The red light will flash, and the app will
  display a warning indicating the need to charge.

• Instructions:

  • Keep the charging port dry and unobstructed to prevent short
    circuits.

  • Use a charger with a rated output voltage of 5V.

• Turning On:

  • After the ring is fully charged, disconnect the power supply,
    and it will turn on automatically.

• Turning Off:

  • When the battery runs out, the ring will automatically shut
    down.

4. Bluetooth Connection

To connect your So Plus Ring to the app via Bluetooth, follow
these steps:

1. After disconnecting the power supply, the ring will turn on
   automatically, and Bluetooth will be enabled.

2. In the app, search for the device named “So+” and select
   “Connection”.

3. Note: Make sure to enable Bluetooth permission and location
   permission for the app.

5. Blood Oxygen Concentration Monitoring

Monitor your blood oxygen concentration using the So Plus
Ring:

• Automatic Test:

  • The ring will automatically test the blood oxygen concentration
    every 2 hours, save the data, and generate a historical record
    chart.

• Real-time Test:

  • Click the “Test” button to measure the real-time blood oxygen
    concentration value and save the latest data.

  • Note: Maintain a seated position, and the red light on the
    inner ring will flash during blood oxygen monitoring.

6. Resting Heart Rate Monitoring

Monitor your resting heart rate using the So Plus Ring:

• Automatic Test:

  • The ring will automatically test the resting heart rate every
    10 minutes, calculate the average heart rate per hour, save the
    data, and generate a historical record chart.

• Real-time Test:

  • Click the “Test” button to measure the real-time resting heart
    rate and save the latest data.

  • Note: Maintain a seated position, and the green light on the
    inner ring will flash continuously during heart rate
    monitoring.

7. Step Statistics

Track your steps in real-time using the So Plus Ring:

• The ring will record your steps and generate a record
  chart.

• The data will be automatically synchronized after connecting to
  the app.

8. Temperature Detection

Monitor your temperature using the So Plus Ring:

• The ring will automatically detect the temperature every hour,
  save the data, and generate a record chart.

• After connecting to the app, the data will be automatically
  recorded.

• Note: The temperature measured is the epidermal temperature of
  the finger skin, not the body temperature.

FAQ

Q: Can the So Plus Ring diagnose or treat medical

conditions?

A: No, the So Plus Ring is not intended to diagnose, treat, or
prevent any disease or medical condition. It is for reference only,
and professional medical advice should be sought if you have any
questions about your medical condition.

Q: How long does it take to charge the So Plus Ring?

A: The So Plus Ring takes approximately 30 minutes to fully
charge.

Q: How can I check the battery power of the ring?

A: You can check the power consumption icon in the upper right
corner of the app homepage to monitor the battery power of the So
Plus Ring.

Q: Can I wear the ring while swimming or showering?

A: No, it is recommended to remove the ring before swimming or
showering to prevent damage.

Q: Can I use any charger to charge the So Plus Ring?

A: It is recommended to use a charger with a rated output
voltage of 5V to charge the So Plus Ring.

Q: Can I connect multiple devices to the So Plus Ring?

A: No, you can only connect one device at a time to the So Plus
Ring via Bluetooth.

So Plus Ring:Perfectly Guarding Your Healthy Lifestyle
The Instructions of the Health Intellect Ring
The statement Please note that the So+ Ring Service is not intended to diagnose, treat or prevent any disease or medical condition. The information and data in the service are for reference and do not replace the professional or physician service. If you have any questions about the medical condition, it is better for you to consult a doctor.
Product Specifications outer surface material: zirconia ceramics main material: stainless steel storage capacity: It is recommended to connect app and synchronize data every day. The data will store for up to 7 days and it depends on the type and frequency of use. product weight: 5.5 gram battery capacity: 18 mah lithium polymer batteries battery time: 3-5 days, depending on the frequency of use charging ways: use the charging cable provided, USB rated 5V charging time: 45 minutes light emitting sensor: LED of all visible colors, safe and friendly for users connection method: Low-power Bluetooth 5.0 software program update: updates through software applications software compatibility: the AppStore, Google Play waterproof level: IPX8
Search for “SoPlus Ring” on Google Play or the App Store to download the APP Note: Please allow APP to obtain Bluetooth connection permission and location permission
Wear it correctly Please put the detection sensor (see the inner ring) in close contact with the finger skin in order to obtain the accurate data.
Charging/Turn on/ Turn off Charging
1

So Plus Ring:Perfectly Guarding Your Healthy Lifestyle
Ring charging: Use the matching charging cable to connect the ring and charger. After the power is switched on, the ring indicator light will be on. Indicator status: When charging, the red light is on and when it is fully charged, the green light is on. Charging time: 30 minutes Power consumption check: Check the power consumption icon in the upper right corner of the APP homepage Low power warning: red light flashing, APP pop-up warning, indicating the need to charge
Instructions Please keep the charging port dry without blocking to prevent short circuit. It is recommended to use a charger with a rated output voltage of 5V.
Turn on/off Turn on: After it is fully charged, disconnect the power supply and the ring will turn on automatically. Turn off: When the battery runs out, it will automatically shut down.
Bluetooth connection After the power is disconnected, the ring will turn on automatically. The Bluetooth will turn on the broadcast. APP will search the device “So+” and select “Connection”. Note: Please enable the Bluetooth permission and location permission of the APP
Blood oxygen concentration monitoring Automatic test: The ring automatically tests the blood oxygen concentration every 2 hours, saves the test data, and generates the historical record chart. Real-time test: Click ” test” button to test the real-time blood oxygen concentration value and save the latest real- time data. Note: Keep sitting still, and the red light in the inner ring keeps flashing when the blood oxygen is monitored.
Resting heart rate monitoring
2

So Plus Ring:Perfectly Guarding Your Healthy Lifestyle
Automatic test: The ring automatically tests the resting heart rate every 10 minutes, calculates the average heart rate per hour, saves the data, and generates the historical record char. Real-time test: Click the ” test ” button to test the real-time resting heart rate and save the latest real-time data. Note: Keep sitting still and the green light in the inner ring flashes continuously during heart rate monitoring.
Step statistics Record the steps in real time, generate the record chart, and automatically synchronize the data after connecting the APP.
Temperature detection The ring will automatically detect the temperature every hour, save the data and generate a record chart. After connecting the APP, the data will be automatically recorded. Note: The temperature is the epidermal temperature of the finger skin, not the body temperature.
Sleep monitoring The ring records the complete sleep cycle in real time, scientifically analyze the duration of wakefulness, light sleep and deep sleep, and then generate a chart.
Ring /APP upgrade The APP detects the new version of the program automatically. For better user experience, please update the program and APP to the latest version.
Q&A 1. The Bluetooth connection fails Please ensure that the Bluetooth and location permissions of the APP are enabled. When the ring has no power or low power, the Bluetooth connection cannot be made. Please charge the ring. 2. Data is inaccurate Please wear the ring correctly. The detection sensor in the inner ring is in close contact with the finger skin. 3. The ring has been bound The ring has a unique ID. If you need to bind a new APP account, please unbind
3

So Plus Ring:Perfectly Guarding Your Healthy Lifestyle
the ring from the APP account. If you forget the APP account, please contact the manufacturer. Exemption Rules 1. Normal wear and tear, including scratches and dents. 2. The consumable components, such as batteries. 3. Damage caused by not complying with the instructions. 4. Damage caused by force majeure, such as fire, flood and so on. 5. Damage caused by unauthorized tampering or alteration of the product.
Maintenance Rules 1. The surface of the ring is made of ceramic. Do not put hard objects together in order to avoid scratching the surface of the ring. 2. Do not contact with strong acid and alkali chemicals to avoid corrosion. 3. The outer ring is made of ceramic, which is very fragile so it should prevent crashing. 4. Please clean with neutral solution and soft cloth. 5. The ring contains batteries. Do not expose to high temperature for a long time.
4

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>