Power Home HiFi Stereo Amplifier – 90 Watt Portable Dual Channel-Complete Features/User Manual
- June 5, 2024
- Pyle
Table of Contents
Power Home HiFi Stereo Amplifier – 90 Watt Portable Dual Channel
Specifications
- ITEM DIMENSIONS LXWXH: 8.5 x 6.75 x 2.25 inches,
- VOLTAGE: 90 Volts,
- MANUFACTURER: Sound Around,
- MOUNTING TYPE: Surface Mount,
- BRAND: Pyle,
- ITEM WEIGHT: 1.3 pounds,
- CONNECTIVITY TECHNOLOGIES: Auxiliary,
- OTHER DISPLAY FEATURES: Car Audio or Theater,
- INCLUDED COMPONENTS: 90-watt Class-t Hi-fi Stereo Amp,
- IMPEDANCE: 2–8-ohm,
- SIGNAL TOP NOISE RATIO: >80dB,
- TOTAL INPUT POWER: 90-watt,
- INPUT POWER: DC 9 – 14.4V 2A,
- TOTAL HARMONIC DISTORTION: <0.4%,
- FREQUENCY RESPONSE: 20Hz-20kHz
Introduction
Your entertainment or PA system will benefit from the Pyle Dual Channel HiFi Audio Amplifier! Low distortion and acoustically precise audio reproduction are provided. Allows you to experience high-quality music by supporting speakers with a 2–8-ohm impedance. It has a tone and direct switch that allows you to control how much bass and treble is increased. The filters are removed from the circuit when you switch to direct, and the signal coming in is amplified without any filtering. Various external devices are supported by the professional class-T amplifier. Connect your Android phone, iPhone, iPod, or MP3 player to the 3.5mm jack input and listen to surround acoustic audio through the speaker. For karaoke, it also contains a microphone and an AUX input.
This tiny 2-channel portable home digital stereo receiver box has crisp buttons and rotary knob controls for audio customization. A blue LED- illuminated volume knob that also functions as a power indicator is also included. Shortcut, overload, and overheat protection are included to keep this amp and associated devices working properly and safely. The built-in loudspeaker safety circuit guards your speakers against audio bursts of extreme loudness.
The PFA300 uses a Class-T audio amplifier IC for low distortion and acoustically accurate reproduction of music. Tone/direct switching allows for customized listening via separate bass and treble adjustments—or the original signal can be passed through without enhancement. The built-in loudspeaker protection circuit triggers when the amplifier is turned on to protect speaker from high volume bursts of audio. Over-voltage protection circuit shuts down the amplifier if input voltage exceeds 14.4V DC. State of the art design using surf ace mount components and advanced engineering for proven performance, reduced signal interference, and long operational life.
BUILT-IN SAFETY FEATURES
Short cut, overload, and overheat protection keeps this amp, as well as other connected devices, functioning properly and safe. The built-in loudspeaker protection circuit triggers when the amplifier is turned on to protect your speakers from high volume bursts of audio. Overload protection shuts down the amplifier if input voltage exceeds 14.4 Volts.
Frequently Asked Questions
-
What is the best way to connect my Pyle amplifier?
When you press the BT/Line button on the front panel, you’ll hear the voice “POWER ON” and “PAIRING,” and the unit will be ready to link with your external device immediately. -
How can I pair my Pyle amplifier with my Bluetooth device?
Wait for the device to pair with the “Pyle Speaker” Wireless BT name. E. You can play music from your Bluetooth device once it has been paired. You can also use the unit’s control buttons to select tunes from your Bluetooth device. -
What is the best way to connect a power amplifier?
Find out where all of the equipment’s electricity comes from.
Purchase all of the required components (trigger wire, RCA cable, and speaker wire).
Connect the Power Amp to the AV Receiver with a trigger wire.
Connect the AV receiver’s pre-out to the power amplifier’s jack with an RCA cable. -
What is the best way to connect my subwoofer to my stereo amp?
Connect the positive and negative terminals of the right-side output of speaker B on the back of your two-channel stereo amplifier receiver to the positive and negative terminals of the right-side high-level input of your powered subwoofer using a set of speaker wires. -
How do I get into Pyle’s house?
If you go to your iPhone or Android’s Bluetooth settings, you’ll see Pyle Audio. Click on it and input your pairing code, which is 0000 -
What is the best way to connect my Pyle receiver?
When you press the BT/Line button on the front panel, you’ll hear the voice “POWER ON” and “PAIRING,” and the unit will be ready to link with your external device immediately. -
What is the best way to sync my Pyle home speakers?
Make sure your Pyle Bluetooth speaker is turned on before connecting it. Then, for around three seconds, push and hold the Bluetooth button on the speaker until it starts flashing blue. Next, go to your device’s Bluetooth settings and select “Pyle.” After that, the speaker should be connected. -
Is there a Pyle Bluetooth speaker app?
Yes, the app ‘PyleAudio on the App Store’ exists. -
Why are there left and right inputs on my subwoofer?
These low-frequency audio waves are recorded in stereo sound and sent to the subwoofer. Even though the sound is played through a single channel speaker, there is a left and right channel. -
Why isn’t my Pyle speaker working?
It’s possible that you’ll have to unpair the speaker and then re-pair it to your device. 1. Before starting the pairing process, make sure the Bluetooth Speaker is turned on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>