LEVITON LR210-BDD Space Outdoor Load Center Instructions
- June 15, 2024
- Leviton
Table of Contents
LEVITON LR210-BDD Space Outdoor Load Center
Product Information
Specifications
- UPC Code: 7847799642
- Country of Origin: Mexico
- Model: LR210-BDD
- Colour: Gray
- Warranty: 10-Year Limited
- Amperage: 100 A
- Short Circuit Current Rating: 22 KA
- Spaces / Circuits: 20 / 20
- Type of Load Center: Main Breaker
- Voltage: 120/240 VAC
- Busbar Material: Copper, Bright TinPlated
- Busbar Rating: 225A
- Dimensions: 30 H x 15 W x 4.4 D
- Enclosure Material: Galvanized Steel, Gray Baked Enamel
- Ground Connection: 4 AWG – 2/0 AWG Cu/Al
- Supply Connections: 3 AWG – 300 MCM Cu/Al
- Weight: 42.75 lbs
- NEMA Enclosure Type: NEMA 3R Outdoor
- Standards & Certifications:
- UL 50: Yes
- UL 50E: Yes
- UL 67: Yes
- UL 869A: Yes
Product Usage Instructions
Wiring the Load Center
Leviton’s revolutionary design allows the entire Load Center to be wired at the rough-in stage without any circuit breakers present. Follow these steps to wire the Load Center:
- Ensure power to the load centre is turned off.
- Strip the insulation off the wires that will be connected to the load centre.
- Insert the stripped ends of the wires into the appropriate terminal blocks or lugs, following the wiring diagram provided.
- Tighten the terminal screws securely to establish a reliable electrical connection.
- Repeat the process for each wire.
- Once all wiring is complete, double-check all connections for accuracy and tightness.
Circuit Breaker Installation
After wiring the Load Center, you can proceed with installing circuit breakers. Here’s how:
- Identify the circuit breakers required for your specific electrical setup.
- Insert each circuit breaker into its corresponding slot in the Load Center panel.
- Ensure that each circuit breaker is securely seated in its slot.
- If necessary, connect the circuit breaker to the appropriate wires using the terminal screws or lugs.
- Repeat the process for each circuit breaker.
Neat Wiring
To promote secure and neat wiring, Leviton Load Centers feature notches stamped into the enclosure for cable ties. Follow these guidelines for neat wiring:
- Bundle and route wires in an organized manner.
- Secure the wires using cable ties inserted into the notches on the enclosure.
- Ensure that the cables are not tightly strained or twisted.
- Double-check the wiring for any loose connections or exposed wires.
Frequently Asked Questions
- Q: Can this Load Center be used for outdoor installations?
- A: Yes, this Load Center is specifically designed for outdoor use. It is NEMA 3R rated, protecting against rain, snow, and ice.
- Q: What is the maximum amperage this Load Center can handle?
- A: The Load Center has a 100A Main Circuit Breaker and is suitable for applications up to 60A when using copper wire or 50A when using aluminium wire.
- Q: What is the warranty period for this product?
- A: The product comes with a 10-Year Limited Warranty.
- Q: What is the weight of this Load Center?
- A: The Load Center weighs approximately 42.75 lbs.
- Q: Are Leviton Circuit Breakers compatible with this Load Center?
- A: Yes, this Load Center is specifically designed for use with Leviton Circuit Breakers.
- Q: Where can I find information about Leviton’s global offices?
- A: You can find information about Leviton’s global offices by visiting www.leviton.com/international/contacts/.
LR210-BDD
- 20 Space Outdoor Load Center with 100A Main Circuit Breaker
- Outdoor Load Center with 100A Main Circuit Breaker Factory Installed, 20 Circuits,
- NEMA 3R Rated. Includes Enclosure and Door Only
- EASY – Leviton’s revolutionary design allows the entire Load Center to be wired at rough-in without any circuit breakers present
- SUPERIOR CONDUCTIVITY – All Leviton Load Centers come standard and equipped with tin-plated copper bussing
- ORGANIZED – Notches stamped into the enclosure for cable ties promote secure and neat wiring
- Learn more about Leviton’s electrical wiring devices in ARCAT’s construction specifications.
- For applications up to 60A when using copper wire; or 50A when using aluminum wire
- Designed for Leviton Circuit Breakers
Technical Information
Product Features
- Colour: Gray
- Warranty: 10-Year Limited
Electrical Specifications
- Amperage: 100 A
- Short Circuit Current Rating: 22 KA
- Spaces / Circuits: 20 / 20
- Type of Load Center: Main Breaker
- Voltage: 120/240 VAC
Mechanical Specifications
- Busbar Material: Copper, Bright Tin-Plated
- Busbar Rating: 225A
- Dimensions : 30″ H x 15″ W x 4.4″ D
- Enclosure Material: Galvanized Steel, Gray Baked Enamel
- Ground Connection: 4 AWG – 2/0 AWG Cu/Al
- Supply Connections : 3 AWG – 300 MCM Cu/Al
- Weight: 42.75 lbs
Environmental Specifications
- NEMA Enclosure Type: NEMA 3R Outdoor
Standards & Certifications
- UL 50: Yes
- UL 50E : Yes
- UL 67: Yes
- UL 869A : Yes
**Patents***
US10658142 US10971319
*This list is provided for patent marking purposes only. A good faith effort is made to maintain the accuracy and completeness of this list. No legal inference should be drawn from the omission of a patent from this list.
Cover Screw Dimensions
- DOUBLE THREAD (THREAD FORMING): #10-32 – 2A PITCH: THREAD, 32 THREADS PER INCH
CONTACT
Leviton Manufacturing Co., Inc.
- 201 North Service Road, Melville, NY 11747
- Telephone: +1-800-323-8920 · FAX: +1-800-832-9538 · Tech Line (8:30AM-7:30PM E.S.T. Monday-Friday):
- +1-800-824-3005
Leviton Manufacturing of Canada, Ltd.
- 165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 · Telephone: +1-800-469-7890 ·
- FAX: +1-800-824-3005 · www.leviton.com/canada
Leviton S. de R.L. de C.V.
- Lago Tana 43, Mexico DF, Mexico CP 11290 · Tel.: (+52)55-5082-1040 · FAX: (+52)5386-
- 1797 · www.leviton.com.mx
- Visit our Website at: www.leviton.com
- © 2021 Leviton Manufacturing Co., Inc. All Rights Reserved. Subject to change without notice.
Leviton has a global presence.
- If you would like to know where your local Leviton office is located please go to:
- www.leviton.com/international/contacts/.
Read User Manual Online (PDF format)
Loading......