FS S5860-24XB-U Multi Gigabit Poe Switch Instructions

: June 15, 2024
: FS

Table of Contents

FS S5860-24XB-U Multi Gigabit Poe Switch
Product Information
Product Usage Instructions
Steps for the Upgrade Process
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FS S5860-24XB-U Multi Gigabit Poe Switch

Product Information

Product Name: S3400-24T4SP SWITCH SGNP
Compatible Models: S5860-20SQ; S5860-24XB-U

Specifications

Hardware version: 1.00
Boot version: 1.4.27(Master) 1.4.3(Slave)
Rboot version: 1.1.39
Software version: S5860_FSOS 12.6(2)B0101
Serial number: 1234942570042 (Slot 1/0: S5860-20SQ), 1234942570044 (Slot 2/0)

Product Usage Instructions

Chapter 1: Steps for the Upgrade Process

Step 1: Check the Current Version

Check the current software version of the product:

System uptime: 07:05:36:46
Hardware version: 1.00
Boot version: 1.4.27(Master) 1.4.3(Slave)
Rboot version: 1.1.39
Software version: S5860_FSOS 12.6(2)B0101
Serial number: 1234942570042 (Slot 1/0: S5860-20SQ)

Step 2: File Transfer for Version Update

Transfer the SP1 patch package file for version update.
File transfer successful.

Step 3: Version Upgrade

Perform the version upgrade using the following command:
- S5860#install activate S5860_FSOS_12.6(2)B0101_SP1.bin slot all

Step 4: Check the Patch Installation Status

To check the patch installation status, use the command:
- S5860#sh install

Step 5: Enable Automatic Restart of Devices After Applying Cold Patches

To enable automatic restart of devices after applying cold patches, use the command:
- S5860#install activate S5860_FSOS_12.6(2)B0101_SP1.bin slot all

Steps for the Upgrade Process

NOTE

To upgrade with SP1 patch, it is required to have the current software version of the product as S5860_FSOS 12.6(2)B0101, Release (10131123).
The SP1 patch is currently only compatible with the S5860_FSOS_12.6(2)B0101_install.bin version.
The SP1 patch only supports command-line upgrades; attempting a web upgrade will result in an error.

Check the Current Version

Use the “show version” command to check the current version information of the switch S5860#sh version

System description: FS Campus Switch (S5860-20SQ) By FS.COM Inc
System start time: 2023-06-21 14:21:40
System uptime: 07:05:36:46
System hardware version: 1.00
System software version: S5860_FSOS 12.6(2)B0101
System patch number: NA
System serial number: 1234942570042
System boot version: 1.4.27(Master) 1.4.3(Slave)
System rboot version: 1.1.39
Module information:
- Slot 2/0: S5860-20SQ
- System uptime: 07:05:36:46
- Hardware version: 1.00
- Boot version: 1.4.27(Master) 1.4.3(Slave)
- Rboot version: 1.1.39
- Software version: S5860_FSOS 12.6(2)B0101
- Serial number: 1234942570042
- Slot 1/0: S5860-20SQ
- System uptime: 07:05:36:46
- Hardware version: 1.00
- Boot version: 1.4.27(Master) 1.4.2(Slave)
- Rboot version 1.1.39
- Software version: S5860_FSOS 12.6(2)B0101
- Serial number: 1234942570044

File Transfer for Version Update

It is recommended to use the out-of-band network to transfer files through TFTP. Execute the following command. Remove the keyword “oob” if using an in-band network for the transfer.
copy oob_tftp://172.30.61.155/S5860_FSOS_12.6(2)B0101_SP1.bin flash: S5860_FSOS_12.6(2)B0101_SP1.bin S5860#copy oob_tftp://172.30.61.155/S5860_FSOS_12.6(2)B0101_SP1.bin flash: S5860_FSOS_12.6(2)B0101_SP1.bin Press Ctrl+C to quit Copy success.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Version Upgrade

Executing the patch command on the device. The successful installation of patches can be verified through logs or by using the “show install detail” command, looking for the keyword “SUCCESS”. S5860#upgrade flash:S5860_FSOS_12.6(2)B0101_SP1.bin slot all force

You use the force command, Are you sure? Continue [Y/N]y

< The terminal is lock > < you can press Ctrl+C to unlock terminal >

Upgrade start
!!!!!!!!!!100%
Upgrade success

Operate result information:

Slot/ Result /Comment
- 2/0 / Success / None
- 1/0 / Success / None

< The terminal is unlock >

To Check the Patch Installation Status

S5860#sh install

Install information:

[Slot 2/0]

Name / State / Flag / Effective / time / Package
- S5860_FSOS_12.6(2)B0101_SP1.bin / installed / Cold

[Slot 1/0]

Name / State / Flag / Effective / time / Package
- S5860_FSOS_12.6(2)B0101_SP1.bin / installed / Cold

To Enable Automatic Restart of Devices After Applying Cold Patches

S5860#install activate S5860_FSOS_12.6(2)B0101_SP1.bin slot all Activate this package maybe reload system later, continue?[Y/N]y

< The terminal is lock >

Operating, please wait for a moment
!!!!!!!!!! 20%
!! 100%
Patch operation finish!

Operate result information:

Slot / Result / Comment
- 2/0 / Success / None
- 1/0 / Success / None

< The terminal is unlock >

S5860#

Press RETURN to get started
- [39639.913696] sysrq: SysRq : Resetting

U-Boot 1.4.27–g83a26df (Nov 03 2022 – 11:12:18 +0800)

I2C: ready
DRAM: 1 GiB
NAND: 1024 MiB

Loading Environment from SPI Flash… SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB

OK
- Boot: Master
- Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot 0
- ubi0: attaching mtd2
- ubi0: scanning is finished
- ubi0: attached mtd2 (name “mtd=10”, size 500 MiB)
- ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
- ubi0: good PEBs: 3999, bad PEBs: 1, corrupted PEBs: 0
- ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
- ubi0: max/mean erase counter: 1093/457, WL threshold: 4096, image sequence number: 2877383229
- ubi0: available PEBs: 0, total reserved PEBs: 3999, PEBs reserved for bad PEB handling: 159
- Loading file ‘/boot/kernel.img’ to addr 0x64000000…
Done
- Loading file ‘/boot/initrd.img’ to addr 0x64300000…
Done
- Loading file ‘/boot/fdt.img’ to addr 0x64a00000…
Done
- starting pid 466, tty ”: ‘-/etc/sysinit’
starting initrd
- Switching rootfsUBI device number 1, total 3888 LEBs (493682688 bytes, 470.8 MiB), available 0 LEBs (0 bytes), LEB size
126976 bytes (124.0 KiB)
- [ 24.358389] TIPC: Activated (version 2.0.0)
- [ 24.358656] TIPC: Started in single node mode
log: connected to ubus
- *Jun 29 08:41:51: %CLI-6-STARTUP: Cli server process startup.
- *Jun 29 08:41:51: %VSU-5-DTM_TOPO_INIT: Topology INIT completed.
- *Jun 29 08:41:51: %LOCAL_DP-5-LC_PROB: Board information in this chassis has been collected.
- [ 73.044602] TIPC: Started in network mode
- [ 73.044655] TIPC: Own node identity 1001285, cluster identity 4711
- [ 73.044665] TIPC: 32-bit node address hash set to 1001285
- [ 73.086333] TIPC: Enabled bearer , priority 10

To Check the Patch Installation Status

Patch status

uninstall: Not installed
install: Installed
active: Temporarily activated, rollback after restart
running: Permanently activated

After executing the “install activate” commands, the patch status will be: S5860#sh install

Install information

[Slot 2/0]
- Name / State / Flag / Effective / time / Package
- S5860_FSOS_12.6(2)B0101_SP1.bin / active / Cold / 2023-06-29 09:40:13
[Slot 1/0]
- Name / State / Flag / Effective / time / Package
- S5860_FSOS_12.6(2)B0101_SP1.bin / active / Cold / 2023-06-29 08:40:12

View patch status

FS#show install

Install information