KVANT Epic 270 BlueBoost Laser Projector User Manual
- June 1, 2024
- KVANT
Table of Contents
KVANT Epic 270 BlueBoost Laser Projector
Product Information
The Epic 270 BlueBoost is a high-performance Bluetooth speaker designed for immersive sound experiences.
Specifications
- Model: Epic 270 BlueBoost
- Connectivity: Bluetooth
- Power Output: 20W
- Battery Life: Up to 10 hours
- Water Resistance: IPX5
- Dimensions: 8in x 4in x 3in
- Weight: 1.5 lbs
Product Usage Instructions
Charging
Before using the Epic 270 BlueBoost for the first time, ensure it is fully
charged. Connect the provided USB cable to the speaker and a power source. The
LED indicator will show red while charging and turn blue when fully charged.
Bluetooth Pairing
To pair your device with the speaker, turn on the Bluetooth on your device and
select “Epic 270 BlueBoost” from the list of available devices. Once paired,
you will hear a confirmation sound.
Playback Controls
Use the buttons on the speaker to control playback. Press the play/pause
button to start or pause music, and use the volume buttons to adjust the sound
levels.
Water Resistance
The Epic 270 BlueBoost is water-resistant with an IPX5 rating. While it can
withstand splashes and rain, avoid submerging it in water.
For all those epic shows and unforgettable moments – KVANT brings you the Epic! The Epic series projectors are full-colour RGB scanning lasers with a super-charged power output of hundreds of watts. Currently, the Epic range includes three models – Epic 100, 170 and 270 BlueBoost. The 20 kpps Juno scanners offer reliable performance with plenty of speed for all the atmospheric effects, such as beams, waves, tunnels and sheets that are suitable for outdoor shows at stadiums and arenas. The Epics are about simplicity, power and toughness. Manufactured to IP65 certified housing that is thoroughly waterproof and dustproof and factory fitted with Motorised Dichroic Filters for quick and easy internal colour alignment, Epics are an excellent bit of kit for touring.
PRODUCT SPECIFICATION SHEET
SPECIFICATIONS
- Source | Type: Semiconductor laser diode | Full-colour RGB laser projector
- Suitability: Large-scale outdoor laser displays [atmospheric, basic graphics]
- System control: FB4-STD [Ethernet, ArtNet | PC, Lighting Console or Autoplay]
- Compliant with: EN 60825-1
- Weight [kg]: 89
- Size [WxHxD, mm]: 500 x 315 x 876 Guaranteed opt. output 270 watts
- Installed modules R | G | B [W]: 30 | 60 | 180 *note A
- Wavelengths [nm, ±5nm]: 638 | 525 | 465+45
- Beam size [mm]: 10 x 12
- Beam divergence [mrad]: 1.1 [full angle, averaged value, *note B] Analogue modulation [kHz] 100
- X-Y scanners: Juno 5 | 20 kbps @ 8°, max. scanning angle 40° on both axes
- Power requirements [V] | Input: 100-240/50-60Hz | Neutrik powerCON TRUE1
- Max. power consumption [VA]: 1800
- Operation temperature [°C]: 5-40
- Included in the set: Chiller, 10M Water supply hoses, 2x Heavy-duty flight case, 10M AC power cable, 10M Ethernet rj45 signal cable, E-STOP Remote with 10M 3-pin XLR cable, Set of 2 safety keys, Interlock bypass dongle [supplied for the USA only],
USB memory stick with the user manual, QC certificate. Pangolin QuickShow laser control and creation software is available for FREE download.
HW features:
-
Motorised Dichroic Filters.
All the basic system settings and adjustments such as power output adjustment for each colour, X & Y axes invert, X & Y size and position, etc. are managed via the built-in FB4 control interface. Scanning system overload protection. -
Laser safety features:
Keyed interlock, emission delay, magnetic interlock, scan-fail safety, fast electromechanical shutter [reaction time <20ms], adjustable aperture masking plate, Emergency STOP system with keyed remote and manual RESTART button. -
note A
Due to Advanced Optical Correction technology used in Kvant systems, the real power output of each laser module installed within the system may slightly differ from its specification. This doesn’t affect the total guaranteed power output of the system. -
note B
The beam divergence total is calculated as an average arithmetic value of all individual colours. The divergence of each colour is calculated as:
1. FWHM of the beam cross-section for round beams, or
2. The arithmetic average of the beam’s horizontal and vertical divergence for all rectangular beams. View less
www.kvantlasers.sk | info@kvant.sk | Odborárska 23,831 02 Bratislava,Slovakia
FAQ
Q: How do I reset the device?
A: To reset the Epic 270 BlueBoost, press and hold the power button for 10
seconds until you hear a beep.
Q: Can I pair multiple devices at once?
A: No, the Epic 270 BlueBoost can only be connected to one device at a time.
Disconnect from the current device before pairing with another.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>