Kraus KPF-3104 Oletto Pull Down Kitchen Faucet Installation Guide

June 14, 2024
Kraus

**Kraus KPF-3104 Oletto Pull Down Kitchen Faucet Installation Guide

**

Congratulations on the purchase of your new Kraus plumbing fixture!

Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:

STOP: DO NOT RETURN TO STORE

Please contact our Customer Service Team1-800-775-0703 / [email protected]

Have the model number available and retain a copy of your receipt with purchase date for reference

If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

STOP

Prior to Installation: ·

  • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703for a replacement.
  • Read all instructions and safety warnings and ensure you have all tools, parts, and  equipment necessary for a safe installation.
  • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
  • Clean sink or countertop toremove any debris, plumber’s putty, or silicone.
  • Flush angle stops to release any debris prior to installation.
  • Pre-drilled hole size requirement: 1 3/8″ (min)
  • Max countertop thickness: 2 3/8”

Tools Required

Adjustable Wrench

Phillips Screwdriver

Silicone Sealant

Safety Goggles

Pipe Tape

Care & Maintenance
To keep the product clean & shining, follow the steps below:
   

  1. Rinse with clean water & dry with a soft cloth
  2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
  3. Do not use cloth with a coarse surface
  4. Unscrew the aerator and clean when necessary

This installation manual is subject to change without further notice.

Diagram and Parts List

A. Faucet Body
B. Mounting Hardware

  1.  Rubber & Metal Washer
  2. Mounting Nut
  3. Mounting Screws

C. Weight
D. Hex Key
E. Base Seat Assembly

For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or [email protected]

Faucet Dimension

Installer Tip: Shut off main water supply before installing new faucet

Step 1. Installing the faucet assembly

I nstalling the faucet assembly Insert all the hoses through the Base Seat Assembly (E). Insert the faucet body through the hole in the sink or countertop.

Step 2 : Securing the faucet assembly **

Install the rubber washer nanometal washer (B1) onto that headed mounting shank. Thread the nut (B2) onto the mounting shank. Lock the nut (B2) into position by tightening  the screws (B3).** Do not overtighten.

**Step 3. Securing the faucet assembly

Push the quick connector (1) firmly upward and attach it to the receiving block (2)**. Pull down moderately to ensure the connection has been made.

**Step 4 Attach the counterweight

**

Install the weight (C) on the marked area of the spray hose

**Step 5. Making the waterline connections

Thread the nut (1) on the supplying onto the outlet of the water supply valve and tighten with wrench. Do not overtighten
NOTE: Please make sure filter washers are installed before connecting to the main valve.
**

Step 6. Flushing and checking for leaks

Pull the hose assembly out of the pout and remove the spray heady unscrewing it from the hose ins counterclockwise direction. Be sure to hold the end of the hoedown into the sink and turn the faucet on to the warm position where it mixes hot and cold water. Flush the water lines for on minute. This flushes away any debris that could cause damage to internal parts. Check for leisure- tighten any connections if necessary, but do not overtighten. Reinstall the spray head by hand tightening it back onto the spray hose. After installation is completed, turn on the hot anticold water supplies. Check frolics.

**Replacement Parts

** Denotes faucet component color options:
CH – Chrome
SFS – Spot Free Stainless Steel
MB – Matte Black
BG – Brushed Gold
WH – White
BL – Black

Replacement Parts List Finish/Color Part #
1. Sprayer Head CH,SFS,MB,BG* KP46002
2. Check Valve KP46025
3. Sprayer Hose CH,SFS,MB,BG* KP46001
4. Handle Assembly CH,SFS,MB,BG* KP46022
5. Cartridge Cover CH,SFS,MB,BG* KP46015
6. Locking Nut KP46013
7. Cartridge KP46012
8. Base Seat Assembly CH,SFS,MB,BG* KP46021
9. Rubber Washer KP46004
10. Metal Washer KP46006
11. Mounting Nut KP46007
12. Mounting Screw KP46008
13. 1.8GPM Flow Restrictor WH* KP46011
14. Quick Connector KP46010
15. EZ-Weight KP46009
16. Filter Washer KP46024
17. Hex Key KP46017
18. Mounting Hardware Kit (includes KP46004,KP46006, KP46007,KP46008)

KP46038

Trouble shouting

if you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

PROBLEM CAUSE ACTION
Leakage under faucet handle Locking nut has come loose or cartridge needs to
be reseated. Remove button located at top of handle.Loosen set screw with hex

wrench. Remove handle and unscrew cartridge cover byhand. Tighten locking nut with an adjustable wrench.
Water does not shut off| Cartridge may need to be| Remove button located at top of handle.
completely| adjusted or replaced.| Loosen set screw with hex wrench. Remove
| | handle and  unscrew  cartridge  cover  by
| | hand.| Unscrew| locking| nut| with| an
| | adjustable wrench. Remove ceramic disc
| | cartridge.
| | Check for cracks, and if O-ring is seated
| | correctly. Reseat cartridge.
Leaking between spray head and the hose| Spray head may be loose or washer is not seated correctly in the hose connection.| Tighten spray head by hand until snug. Make sure washer is seated correctly.
Hose does not retract| Weight may be installed incorrectly.| Readjust weight on hose.
Low flow| Aerator may be clogged

The screen filter in the hose connectors is dirty.

| Unscrew aerator with aerator key. Hold tip of spray head and turn on water to flush debris.
Turn off the water supply at water valve and unscrew the hose connectors forewater supply lines. Clean the screen in the water lines with hot water, removing any debris or calcium build up.

Codes/Standards Applicable

NSF/ANSI 372

NSF/ANSI/CAN 61: Q ≤ 1

ASME A112.18.
1.8GPM 6.8L/min maximum

Faucet
Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty icon-transferable.

Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.

Kraus warrants the Faucet’s sprayhead assembly (including the engine, aerators, structure, restrictors, back flowpreventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel) of the productto be free from defects in material and workmanship under normal usage for a period of one (1) year from the date ofpurchase.

Kraus warrants the Faucet’s cartridge to be free from defects in material and workmanship undernormal  usage for aperid of five (5) years from the date of purchase.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus.

  • Commercial Warranty
    Kraus USA Plumbing, LLC (“Kraus”) warrants its Products for a period of one (1) year to commercial purchasers of Products used in industrial, commercial and business applications. Care and Cleaning Instructions

Certain cleaning products may cause damage to a Product’s finish and use of the following on the Product will void this warranty:

  • * Abrasive cleaners such as powders, bleach, ammonia, alcohol or chorine
    •  Arasive pads, steel wool or wire brushes

What is Not Covered

This warranty does not cover Products that were discontinued when purchased or display Products, whether such Products were purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does noncoder any free gifts included with purchase.

This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application), abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance, alteration of the Product, or failure to follow care, cleaning or installation instructions enclosed with your Product. Kraus recommends that all Kraus Products be installed by a fully licensed and insured trade professional with experience in the installation of bathroom and/or kitchen manufactured goods.

How to Make a Warranty Claim

If you are a consumer purchaser, please contact a Kraus Customer Service Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 [email protected]

If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 [email protected]

If you are an authorized partner, please contact a Partner Support Representative at:
Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8954 [email protected]

In requesting warranty service, please be ready to provide your proof of purchase and a description of the problem. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and PuertoRico shipping charges may apply). International shipping fees are not included.

Limitation on Duration of Implied Warranties

Please note that some states/provinces (including Quebec) do not allow limitations on how long an implied warranty lasts, so the below limitations may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY ANDOF FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THISWARRANTY, WHICHEVER IS SHORTER.
Limitation of Special, Incidental or Consequential Damages
Please note that some states/provinces (including Quebec) do not allow the exclusion or limitation of special, incidental or consequential damages, so the below limitations and exclusions may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS USAPLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISINGOUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.

This warranty gives you specific legal rights, and you may also have other rights which vary from state/province tostate/province.

IMPORTANT

Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information.

REGISTER TODAY

Logo

Documents / Resources

| Kraus KPF-3104 Oletto Pull Down Kitchen Faucet [pdf] Installation Guide
KPF-3104, KPF-3104 Oletto Pull Down Kitchen Faucet, Oletto Pull Down Kitchen Faucet, Pull Down Kitchen Faucet, Down Kitchen Faucet, Kitchen Faucet, Faucet
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Kraus User Manuals

Related Manuals